Huffy 89225 - Manual (Page 16)

P/N 21154401 01/04 16
20
20
41
9.
Attach upper and lower elevator tubes (21) to top pole section (14) using bolts (20) and
nuts (42) as shown. Attach pole cap (41) as shown.
42
21
21
21
21
• Fit rim (58) securely into bracket (1) as shown.
• Install reinforcement bracket (3) onto “T” bolt (2) as shown.
• Install spring (4) onto “T” bolt (2) as shown.
• Install special nut (35) and washer (22) onto “T” bolt (2).
10 .
3
35
22
4
58
1
2
Tighten nut (35) until
flush with end of "T" bolt
(2) as shown here.
NOTE:
TWO PEOPLE REQUIRED FOR
THIS PROCEDURE. FAILURE
TO FOLLOW THIS WARNING
COULD RESULT IN SERIOUS
INJURY AND/OR PROPERTY
DAMAGE.
WARNING!