Hitachi VT-F392A - Manual (Page 46)

Advanced Operations (Cable Box Hookups)
46
memory, use masking tape to label each cable and connection.
Position Cable Box
Position a remote-controllable cable box on the top of the VCR as shown. Be sure not to
block any of the VCR's ventilation holes.
A. Basic Hookup
Use this hookup for a simple connection which requires fewer accessories.
1. Set the CH3 CH4 switch on the back of VCR to either channel 3 or 4.
You will tune the TV to this channel and use the VCR/TV button to watch the VCR.
2. Connect as shown.
This connection may require additional accessories not provided.
3. Plug in power cords of VCR, TV, and cable box.
Check all the TV VCR functions.
B. Advanced Hookup (Cable box to unscramble all channels)
Use this hookup for slightly improved picture quality and more convenient operation -
use of VCR/TV button not required.
1. Connect as shown.
This connection requires additional accessories not provided.
2. Plug in power cords of VCR, TV, and cable box.
You will tune the TV to its video input to watch the VCR.
Illustration of Hookup
If your cable box has audio/video output jacks, you can also connect the audio/video
output of the cable box and the audio/video input of the VCR. With this connection,