Hitachi 13VR10B - Manual (Page 15)

OPERATING CONTROLS AND FUNCTIONS
15
+100 button - Press to select cable channels which are equal or greater than
number 100. (To select channel 125, first press "+100" button then press "2"
then "5").
25 ADD/DELETE button - Press to delete or add channel numbers in the
Channel Set Up mode (See page 12). Press to cancel a setting program (for
example: setting clock or timer program) (See page 26). (These functions are
operative only when the menu is shown on the TV screen.)
TAPE COUNTER RESET button - Press to reset counter to 0:00:00.
26 TAPE COUNTER MEMORY button - Press to set counter memory on and
off. (See page 21.)
27 PAUSE/STILL button - Press to temporarily stop the tape during the
recordgin or to view a still picture during playback.
28 STOP button - Press to stop the tape motion.
29 LIGHT button - Press to light up buttons. If it is dark, white buttons are
lighted up to show these position.
30 TAPE SPEEED button - Press to set desired recording speed.
(SP/LP/SLP)
31 RECALL button - Press to go back to the previously viewed channel. For
example, pressing this button once will change channel display from 3
(present channel) to 10 (previously viewed channel), and pressing it a second
time will return from10 to 3.
32 ANT. terminal - Connect to an antenna or CATV.