Harbor Freight Tools 43585 User Manual
Page 3
SKU 43585
For technical questions, please call 1-800-444-3353.
Page 3
7.
STAY ALERT. Watch what you are doing at all times. Use common sense. Do
not operate this product when you are tired or distracted from the job at hand.
8.
OBSERVE WORK AREA CONDITIONS. Do not use this product in the presence
of flammable gasses or liquids. Do not use in damp or wet areas. Keep work area
well-lighted.
9.
CHECK FOR DAMAGED PARTS. Before using this product, carefully check that
it will operate properly and perform its intended function. Check for damaged
parts and any other conditions that may affect its operation. Replace or repair
damaged or worn parts immediately.
10.
DO NOT ABUSE THE POWER CORD. Protect the electrical power cord from
damage, either from impacts, pulling, or corrosive materials. Do not yank the tool’s
cord to disconnect it from the electrical receptacle.
11.
DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate
for which it was intended. Do not use inappropriate attachments in an attempt to
exceed the tool’s capacities.
12.
REMOVE ADJUSTING KEYS AND WRENCHES. Be sure that keys and
adjusting wrenches are removed from the tool or machine work surface before
operation.
13.
AVOID UNINTENTIONAL STARTING. Be sure that you are prepared to begin
work before turning the start switch on.
14.
ALWAYS DISCONNECT THIS TOOL FROM ITS ELECTRICAL SUPPLY
SOURCE WHEN NOT IN USE, BEFORE PERFORMING MAINTENANCE OR
SERVICING, AND WHEN CHANGING ACCESSORIES SUCH AS ROUTER
BITS.
15.
SECURE THE MATERIAL. ALWAYS use clamps or a vise to hold the workpiece.
16.
REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only
identical replacement parts. Only use accessories intended for use with this
product. Approved accessories are available from Harbor Freight Tools.
17.
MAINTAIN THIS PRODUCT WITH CARE. Keep this product clean and dry, moving
parts lightly lubricated, and router bits sharp for better and safer performance.
18.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored and locked up in a dry location to inhibit rust. Keep out of reach of children.
19.
MAINTENANCE: For your safety, service and maintenance should be performed
regularly by a qualified technician.
20.
USE THE RIGHT PRODUCT FOR THE RIGHT JOB. There are certain
applications for which this tool was designed. Do not use a small tool or attachment
to do the work of a larger industrial tool. Do not use this product for a purpose for
which it was not intended.