Honeywell HF-810 - Manual (Page 3)

CLEANING AND STORAGE
• Unplug the fan before
cleaning.
• Use only a soft cloth or
cotton swab to gently
wipe the fan clean.
• DO NOT immerse the
fan in water and never
allow water to drip into
the motor housing.
• DO NOT use gasoline,
paint thinner or other
chemicals to clean
the fan.
• For storage, clean the
fan carefully as instruct-
ed and store your fan in
a cool, dry place.
INTRODUCTION
The Mega Turbo ™ High
Velocity Fan was aerody-
namically designed to
give you the versatility of
changing this fan's angu-
lar direction simply by
adjusting the fan to ANY
desired angular output
(Fig.1). Upon using this
fan, you will feel the
strong and powerful air
stream that will quickly
move air in order to cool
an area rapidly and
efficiently.
OPERATION
• Place your fan on a
level and dry surface.
• Plug the power cord
into a polarized 120 volt
AC wall outlet.
• To operate your Mega
Turbo
™ Fan, push in and
turn the child resistant
switch to the desired
speed:
HIGH (III), MEDIUM (II)
or LOW (I). (Fig 3
• Adjust the fan to the
desired angular air
output direction.
• To move the fan, turn
the fan OFF and pick it up
by the concealed handle
that is located anywhere
on the outside rim of the
fan (Fig. 2).
Fig. 1 Fig. 2
I
II
III
Fig. 3