Hamilton Beach Classic Chrome Blender - Manual (Page 7)

7
Troubleshooting
PROBLEM
Blender leaks.
Ice not crushed.
Does not blend well.
Cannot remove jar nut.
PROBABLE CAUSE/SOLUTION
• Tighten jar nut on jar.
• Make sure lid with filler cap is pushed down tightly on jar.
• See ice crushing instructions in “Blending Tips” section.
• Make sure enough liquid has been added. A minimum of 8 ounces (250 ml)
is recommended.
• Do not try to mash potatoes, mix stiff dough, whip egg whites, grind raw meat, or extract
juices from fruits and vegetables. The blender is not made to perform these tasks.
• If mixture is too thick, continue to add liquid until mixture is blended to desired consistency.
• Loosen jar nut by holding jar and turning jar nut counterclockwise.
• Place the blender jar on the base and turn the jar handle clockwise.
840163101 ENnv01.qxd 2/14/08 5:36 PM Page 7