Harbor Freight Tools 95176 - Manual (Page 2)

SKU 95176 For technical questions, please call 1-800-444-3353 Page 2
Specifications
Item Description
Function Air blast clears clogs in sinks, basins,
bathtubs, showers, and toilet
Power Source Hand pumping piston to build up pressure
Function Adapters 1” (OD) x 1-7/8” (D), 1-3/8” (OD) x 1-5/8” (D),
4-3/8” (OD) x ¾” (D), 7-3/4” (OD) x 1-3/4” (D)
Overall Dimensions 10 (W) x 9-1/2 (H) x 2 (D) inches
Weight 2.2 lbs.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Do not point or discharge air from the Pistol at people or animals.
Injuries could occur.
2. Keep work area clean. Cluttered areas invite injuries.
3 Observe work area conditions. Keep work area well lighted. Before
operating, wipe up spilled liquids before standing on the floor to avoid
slipping.
4. Keep children away. Children must never be allowed in the work area.
5. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of children.
6. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and
more safely at the rate for which it was intended. Do not modify this tool and
do not use this tool for a purpose for which it was not intended.
7. Dress properly. Wear clothing that will cover the entire body in case of back-
splashing of fluids. Wear rubber gloves.
8. Use eye and protection. Always wear ANSI approved impact safety glasses
and full face shield to protect eyes from splashing fluids.