Hughes Satellite IP Modem R-BGAN - Manual (Page 41)

N ETWORK S ETTINGS
After executing the necessary QuickStart Wizard steps to set up and configure the Satellite IP
Modem, you must select the Network Settings screen to complete your network configuration.
On this screen, you enter the appropriate Domain Name Service (DNS) and the Access Point
Name (APN) information given to you by your Service Provider.
;
Notes
Your Service Provider may have already performed this
configuration step for you.
Your Service Provider must give you all the information
necessary to complete these fields accurately. Do not
attempt to input any of these settings without Service
Provider information.
Whenever you modify the DNS addresses on the Network
Settings screen, you must exit the Control Pad, exit the
Launch Pad, reboot your computer, and power the Satellite
IP Modem off and then back on so that the new settings can
take effect.
Network Settings Screen
Use Static Public Network IP Address: If this box is not checked, the Satellite IP Modem uses an IP
address automatically assigned by the network during the period when the Modem connects to
R-BGAN Satellite IP Modem User Manual 31