Hawking Technology HWU54DM - Manual (Page 17)

10
Note
: Only one configuration utility can be active at a time. When the ZCU is set to be the active utility, opening the
TI utility
- by double-clicking on the utility icon in the system tray or by right-clicking the icon and selecting Open-
launches the ZCU inserted of the TI utility.
4.2 Site Survey
When you open the Configuration Utility, the system will scan all wireless channels to find all access
points/stations within the accessible range of your card and automatically connect to the wireless
device with the highest signal strength . When using the “Site Survey” option, all nearby networks will be
listed. You can change your connection to another network or you may add one of the networks to your
own profile list.
Parameter Description
Available Networks This list shows all available wireless networks within range of your
card. It also displays the information of the networks including the
SSID, BSSID, Signal Strength, Channel, Encryption,
Authentication and Network Type. If you want to connect to any
netw orks on the list, double-click the item on the list, and the card
will automatically connect to the selected network.
Rescan Button C lick “Rescan” button to collect the information of all the wireless
networks nearby.
Connect Button Click “Connect” to connect to the selected network.
Add to Profile Button Add the selected network to Profiles list.