Hitachi VT-MX211A - Manual (Page 20)

PRESET FOR USE
20
4 Select the VCR mode
Press VCR/TV button so that "VCR" appears on the display
5 Select "ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL=Spanish" using CH/SET
or button.
Then, press SELECT or MENU button.
6 Begin channel preset
Press SELECT button once. The tuner scans and memorizes all the active channels in
your area. (TV mode: from CH2/ CATV mode: from CH1)
• The VCR distinguishes between standard TV channels and cable channels.
7 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.
• If you subscribe to CABLE TV, "CATV" appears on the display.
• If "TUNER SET UP" appears on the TV screen again, check the cable connections.
Then, press SELECT button once again. The VCR will begin preset again.
TO RECALL A DESIRED CHANNEL
You can select the desired channel by using CH/SET or button or directly
pressing number buttons on the remote control.
Note for using number buttons: