Husqvarna TRIOBRAKE 235E - Manual (Page 8)

GENERAL SAFETY PRECA UTIONS
8 – English 1154212-49 Re v .2 2011-03-13
Bef ore using a new chain saw
• Please read this manual carefully.
• (1) - (51) refer to figures on p. 2-5.
• Check that the cutting equipment is correctly fitted and
adjusted. See instructions under the heading Assembly.
• Refuel and start the chain saw. See the instructions
under the headings Fuel Handling and Starting and
Stopping.
• Do not use the chain saw until sufficient chain oil has
reached the chain. See instructions under the heading
Lubricating cutting equipment.
• Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
For Canada:
Impor tant
!
W ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the manufac-
turer. Always use genuine accessories.
Non-authorized modifications and/or
accessories can result in serious
personal injury or the death of the
operator or others. Your warranty may
not cover damage or liability caused by
the use of non-authorized accessories
or replacement parts.
!
W ARNING! A chain saw is a dangerous
tool if used carelessly or incorrectly and
can cause serious, even fatal injuries. It
is very important that you read and
understand the contents of this
operator’s manual.
!
W ARNING! The inside of the muffler
contain chemicals that may be carcino-
genic. Avoid contact with these elements
in the event of a damaged muffler.
!
W ARNING! Long term inhalation of the
engine’s exhaust fumes, chain oil mist
and dust from sawdust can represent a
health risk.
!
W ARNING! The ignition system of this
machine produces an electromagnetic
field during operation. This field may
under some circumstances interfere with
pacemakers. To reduce the risk of serious
or fatal injury, we recommend persons
with pacemakers to consult their physi-
cian and the pacemaker manufacturer
before operating this machine.
!
W ARNING! When using a chain saw, a
fire extinguisher should be available.
!
W ARNING! Keep handles dry, clean and
free of oil.
!
W ARNING! Beware of carbon monoxide
poisoning. Operate the chainsaw in well
ventilated areas only.
!
W ARNING! Do not attempt a pruning or
limbing operation in a standing tree
unless specifically trained to do so.
IMPOR TANT!
The machine is only designed for cutting wood.
You should only use the saw with the bar and chain
combinations we recommend in the chapter Technical
data.
Never use the machine if you are fatigued, while under
the influence of alcohol or drugs, medication or
anything that could affect your vision, alertness,
coordination or judgement.
Wear personal protective equipment. See instructions
under the heading Personal protective equipment.
Do not modify this product or use it if it appears to have
been modified by others.
Never use a machine that is faulty. Carry out the
checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the
heading Maintenance.
Never use any accessories other than those
recommended in this manual. See instructions under
the headings Cutting equipment and Technical data.
CAUTION! Always wear protective glasses or a face
visor to reduce the risk of injury from thrown objects. A
chain saw is capable of throwing objects, such as wood
chips, small pieces of wood, etc, at great force. This
can result in serious injury, especially to the eyes.
!
W ARNING! Running an engine in a
confined or badly ventilated area can
result in death due to asphyxiation or
carbon monoxide poisoning.
!
W ARNING! Faulty cutting equipment or
the wrong combination of bar and saw
chain increases the risk of kickback!
Only use the bar/saw chain combi-
nations we recommend, and follow the
filing instructions. See instructions
under the heading Technical data.