Document Outline

• Cover Title 1 - ANA5910/5930/5940
  • Cover Title 3 - PCI-to-ATM Adapter
  • Cover Title 2 - User’s Guide
    • Front Head 1 - Trademarks
    • Front Head 1 - Changes
    • Front Head 1 - Disclaimer
    • Front Head 1 - Adaptec Technical Support and Services
    • Front Head 1 - Sales and Ordering Information
    • Front Head 1 - Federal Communications Commission Radio Frequency ...
    • Front Head 1 - Canadian Compliance Statement
• 7-Title Tbl of Con - Contents
  • 0-Chap TitleTOC - 1 Getting Started
  • 0-Chap TitleTOC - 2 Introducing ATM Networking
  • 0-Chap TitleTOC - 3 Installing the Adapter
  • 0-Chap TitleTOC - 4 Installing ATM Version 4.0x Software for Windows...
  • 0-Chap TitleTOC - 5 Installing ATM Version 2.0x Drivers for Windows ...
  • 0-Chap TitleTOC - 6 Installing ATM Software for DOS/Windows 3.1
  • 0-Chap TitleTOC - 7 Installing ATM Software for Windows 95
  • 0-Chap TitleTOC - 8 Installing ATM Software for Novell NetWare
  • 0-App TitleTOC - A Product Features and Specifications
  • 0-App TitleTOC - B Windows NT Specific Error Messages and Diagnosti...
    • 0-Other TitleTOC - Glossary
    • 0-Other TitleTOC - Index
• 0-Chap Number - 1
  • 0-Chap Title - Getting Started
    • 1-1Head - System Requirements
      • 1-2Head - Hardware Requirements
    • 1-1Head - Document Overview
      • 1-2Head - How to Use This Document
• 0-Chap Number - 2
  • 0-Chap Title - Introducing ATM Networking
    • 1-1Head - How ATM Works
      • 6-5Fig Caption - Figure 21. ATM Networking
      • 1-2Head - Wide Area Connectivity
      • 1-2Head - Scaleable bandwidth
      • 1-2Head - Bandwidth guarantees
    • 1-1Head - Node Identification
    • 1-1Head - Virtual Channel Connections (VCCs)
    • 1-1Head - ATM SONET/SDH Support
    • 1-1Head - 25.6 Mbit/sec ATM
    • 1-1Head - Classical TCP/IP
      • 1-2Head - Classical IP Operational Summary
      • 1-2Head - Classical IP over ATM
    • 1-1Head - LAN Emulation
      • 1-2Head - LAN Emulation Clients (LECs)
      • 1-2Head - LAN Emulation Configuration Server (LECS)
      • 1-2Head - LAN Emulation Server (LES)
      • 1-2Head - Broadcast and Unknown Server (BUS)
• 0-Chap Number - 3
  • 0-Chap Title - Installing the Adapter
    • 3-Start Number - 1 Turn off the computer and any attached devices, ...
    • 3-Number - 2 Detach all cables from the back of the computer....
    • 3-Number - 3 Remove the cover from the computer case. Refer t...
    • 3-Number - 4 Locate an available PCI slot, and remove the slo...
      • 6-6Fig Caption - Figure 31. Removing the Expansion Slot Cover from...
    • 3-Number - 5 Carefully remove the card from its antistatic pa...
    • 3-Number - 6 Align the adapter with the PCI expansion slot, a...
      • 6-6Fig Caption - Figure 32. Inserting the Adapter into the Socket
    • 3-Number - 7 Attach the adapter bracket to the computer chass...
    • 3-Number - 8 Reassemble the computer and replace the cover on...
    • 1-1Head - Connecting the ANA5910/5930/5940 Adapter to the N...
      • 1-2Head - Connecting to the ANA5910
        • 3-Start Number - 1 Obtain the connecting cable.
        • 3-Number - 2 Connect the RJ-45 connector at one end of the ca...
        • 3-Number - 3 Connect the RJ-45 connector at the other end of ...
          • 6-6Fig Caption - Figure 33. Connecting the UTP/STP Cable to the AT...
      • 1-2Head - Connecting to the ANA5930
        • 3-Start Number - 1 Obtain the connecting cable.
        • 3-Number - 2 Connect the RJ-45 connector at one end of the ca...
        • 3-Number - 3 Connect the RJ-45 connector at the other end of ...
      • 1-2Head - Connecting to the ANA5940
        • 3-Start Number - 1 Obtain an MMF cable with an SC connector on one ...
        • 3-Number - 2 Remove the soft rubber cover on the back bracket...
        • 3-Number - 3 Remove the rubber terminators from the ends of t...
        • 3-Number - 4 Attach the SC connector on the MMF cable to the ...
          • 6-6Fig Caption - Figure 34. Attaching the SC Connector of the MMF ...
        • 3-Number - 5 Attach the other end of the MMF cable to the ATM...
          • 6-6Fig Caption - Figure 35. Connecting the MMF Cable to the ATM Sw...
• 0-Chap Number - 4
  • 0-Chap Title - Installing ATM Version 4.0x Software for Windows N...
    • 1-1Head - Installation for Windows NT (version 4.0)
      • 1-2Head - Installing LANE Device Drivers
        • 1-3Head - Installing a LANE Client Driver
          • 3-Start Number - 1 From the Control Panel window, double-click on t...
          • 3-Number - 2 Select the Adapters tab from the Network Setting...
          • 3-Number - 3 Click on the Add button to add a device driver.
          • 3-Number - 4 Insert the ALANE Drivers for Windows NT diskette...
          • 3-Number - 5 Type the drive letter of the diskette drive that...
          • 3-Number - 6 Select Adaptec Inc. ATM LANE Adapter, and select...
          • 3-Number - 7 Select OK to exit the Network Settings dialog bo...
          • 3-Number - 8 Enter Bus Type and Number from the dialog box an...
          • 3-Number - 9 Select Close from the Network Control Panel wind...
          • 3-Number - 10 If IPX/SPX is installed on your workstation, th...
          • 3-Number - 11 If TCP/IP is installed on your workstation, the...
          • 3-Number - 12 Add additional clients (1 to 3) by following th...
        • 1-3Head - Reconfiguring a LANE Client
          • 3-Start Number - 1 From the Control Panel window, double-click on t...
          • 3-Number - 2 From the Network Settings dialog box, select the...
          • 3-Number - 3 Select the LANE adapter you want to reconfigure,...
          • 3-Number - 4 Change any editable parameter as described in th...
        • 1-3Head - Removing a LANE Client
          • 3-Start Number - 1 From the Control Panel window, double-click on t...
          • 3-Number - 2 From the Network Settings dialog box, select the...
          • 3-Number - 3 Select the LANE adapter you want to remove, such...
          • 3-Number - 4 Select Yes.
          • 3-Number - 5 In the Network Settings dialog box, select Close...
          • 3-Number - 6 Select Yes.
          • 3-Number - 7 If you want to reinstall the adapter you just re...
      • 1-2Head - Installing The ATM Utilities
        • 3-Start Number - 1 Select Start, Settings, then Control Panel.
        • 3-Number - 2 From the Control Panel window, click on the Netw...
        • 3-Number - 3 Select the Protocols tab from the Network Settin...
        • 3-Number - 4 Click the Add button to add a device driver.
        • 3-Number - 5 Insert the ALANE Utilities for Windows NT disket...
        • 3-Number - 6 Type the drive letter of the diskette, and selec...
        • 3-Number - 7 Select Adaptec ATM Utilities, and select OK.The ...
        • 3-Number - 8 Select Close.
    • 1-1Head - Installation for Windows NT (version 3.51)
      • 1-2Head - Installing LANE Device Drivers
        • 1-3Head - Installing a First or Single LANE Client Driver
          • 3-Start Number - 1 In the Control Panel window click on the Network...
          • 3-Number - 2 From the Network Settings dialog box, select Add...
          • 3-Number - 3 Select <Other> Requires disk from manufacturer f...
          • 3-Number - 4 Insert the ALANE Drivers for Windows NT diskette...
          • 3-Number - 5 Type the drive letter of the diskette drive that...
          • 3-Number - 6 Select Adaptec Inc. ATM LANE Adapter, and then s...
          • 3-Number - 7 Select OK to exit the Network Settings dialog bo...
          • 3-Number - 8 Enter Bus Type and Number from the dialog box an...
          • 3-Number - 9 Select OK from the Network Control Panel window....
          • 3-Number - 10 If IPX/SPX is installed on your workstation, th...
          • 3-Number - 11 If TCP/IP is installed on your workstation, the...
          • 3-Number - 12 Add additional clients (1 to 3) by following th...
        • 1-3Head - reconfiguring a LANE Client
          • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
          • 3-Number - 2 Select the Network icon.
          • 3-Number - 3 Select the LANE adapter you want to reconfigure,...
          • 3-Number - 4 Change any editable parameter as described in th...
          • 3-Number - 5 Select Restart Now to save and initialize change...
        • 1-3Head - Removing a LANE Client
          • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
          • 3-Number - 2 Select the Network icon.
          • 3-Number - 3 Select the LANE adapter you want to remove, such...
          • 3-Number - 4 Select Yes.
          • 3-Number - 5 In the Network Settings dialog box, select OK.
          • 3-Number - 6 Select Restart Now to save and initialize change...
      • 1-2Head - Installing The ATM Utilities
        • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
        • 3-Number - 2 Select the Network icon.
        • 3-Number - 3 Select Add Adapter from the Network Settings dia...
        • 3-Number - 4 Select <Other> Requires disk from manufacturer f...
        • 3-Number - 5 Insert the ALANE Utilities for Windows NT disket...
        • 3-Number - 6 Type the drive letter of the diskette drive that...
        • 3-Number - 7 Select Adaptec ATM Utilities, and then select OK...
        • 3-Number - 8 Select Close.
    • 1-1Head - Using Device Drivers and Utilities
      • 1-2Head - Stopping ATM Drivers
        • 3-Start Number - 1 If your path is not set up, change to the follow...
        • 3-Number - 2 Stop the driver using the appropriate command be...
      • 1-2Head - Starting ATM Drivers
        • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
        • 3-Start Number - 1 If your path is not set up, change to the follow...
        • 3-Number - 2 Start the drivers you need by entering the comma...
        • 1-3Head - aatmcnfg.exe
        • 1-3Head - aatmdiag.exe
        • 1-3Head - alanecnfg.exe
        • 1-3Head - aatmcons.exe
    • 1-1Head - Locating Files and Directories
• 0-Chap Number - 5
  • 0-Chap Title - Installing ATM Version 2.0x Drivers for Windows NT...
    • 1-1Head - Installation for Windows NT (version 4.0)
      • 1-2Head - Installing CIP Client Drivers
        • 3-Start Number - 1 From the Control Panel window, double-click on t...
        • 3-Number - 2 Select the Adapters tab from the Network Setting...
        • 3-Number - 3 Insert Device Driver for Windows NT Disk 1 in th...
        • 3-Number - 4 Type the drive letter of the diskette drive that...
        • 3-Number - 5 Select Adaptec Inc.ATM ANA-59x0 Adapter(CIP), an...
        • 3-Number - 6 Add PVCs as follows:
        • 3-Number - 7 Change any of the editable parameters in the Ada...
        • 3-Number - 8 Select PCI from the Bus Type drop-down list in t...
        • 3-Number - 9 When the Setup Message dialog box appears, inser...
        • 3-Number - 10 If NT SNMP has not been installed on your works...
        • 3-Number - 11 Select Close to exit the Network Settings dialo...
        • 3-Number - 12 If TCP/IP is installed on your workstation, the...
        • 3-Number - 13 Select Yes to save and initialize changes.
      • 1-2Head - Installing LANE Device Drivers
        • 1-3Head - Installing a LANE Client Driver
          • 3-Start Number - 1 From the Control Panel window, double- click on ...
          • 3-Number - 2 From the Network Settings dialog box, select the...
          • 3-Number - 3 Click on the Add button to add a device driver.
          • 3-Number - 4 Insert the LAN Emulation Client diskette in the ...
          • 3-Number - 5 Select the Have Disk button.
          • 3-Number - 6 Select the drive letter of the diskette drive th...
          • 3-Number - 7 Select Adaptec Inc. ATM LANE Adapter, and then s...
          • 3-Number - 8 Select OK to exit the Network Settings dialog bo...
          • 3-Number - 9 If IPX/SPX is installed on your workstation, the...
          • 3-Number - 10 If TCP/IP is installed on your workstation, the...
          • 3-Number - 11 Add additional clients (1 to 3) by following th...
        • 1-3Head - Reconfiguring a LANE Client
          • 3-Start Number - 1 From the Control Panel window, double-click on t...
          • 3-Number - 2 From the Network Settings dialog box, select the...
          • 3-Number - 3 Select the LANE adapter you want to reconfigure,...
          • 3-Number - 4 Set the editable parameters as described in the ...
        • 1-3Head - Removing a LANE client
          • 3-Start Number - 1 From the Control Panel window, double-click on t...
          • 3-Number - 2 From the Network Settings dialog box, select the...
          • 3-Number - 3 Select the LANE adapter you want to remove, such...
          • 3-Number - 4 Select Yes.
          • 3-Number - 5 In the Network Settings dialog box, select Close...
          • 3-Number - 6 Select Yes to save and initialize changes.
      • 1-2Head - Installing the CIP ARP Server (Optional)
        • 3-Start Number - 1 From the Control Panel window, double-click on t...
        • 3-Number - 2 From the Network Settings dialog box, select the...
        • 3-Number - 3 Click on Add to add a protocol.
        • 3-Number - 4 Select the Have Disk button.
        • 3-Number - 5 Insert the RFC 1577 CIP ARP Server diskette in t...
        • 3-Number - 6 Type the drive letter of the diskette drive that...
        • 3-Number - 7 Select Adaptec ATM ARP Server, and then select O...
        • 3-Number - 8 Remove the RFC 1577 CIP ARP Server diskette from...
        • 3-Number - 9 Select Close to exit the Network Settings dialog...
        • 3-Number - 10 Select Yes to save and initialize changes.
        • 1-3Head - Determining the CIP ARP Server Address
          • 3-Start Number - 1 On the ARP server, enter the following command f...
          • 3-Number - 2 Write this address down. Then replace the 20th b...
        • 1-3Head - Reconfiguring the CIP ARP Server
          • 3-Start Number - 1 From the Control Panel window, double-click on t...
          • 3-Number - 2 From the Network Settings dialog box, select the...
          • 3-Number - 3 Select AARP Server, and then select Properties.
          • 3-Number - 4 Select Close to exit the Network Settings dialog...
          • 3-Number - 5 Select Yes to save and initialize changes.
        • 1-3Head - Removing the CIP ARP Server
          • 3-Start Number - 1 From the Control Panel window, double-click on t...
          • 3-Number - 2 From the Network Settings dialog box, select the...
          • 3-Number - 3 Select AARP Server and then select Remove.
          • 3-Number - 4 Select Yes.
          • 3-Number - 5 In the Network Settings dialog box, select Close...
          • 3-Number - 6 Select Yes to save and initialize changes.
    • 1-1Head - Installation for Windows NT (version 3.51)
      • 1-2Head - Installing CIP Client Drivers
        • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
        • 3-Number - 2 Select the Network icon.
        • 3-Number - 3 Select Add Adapter.
        • 3-Number - 4 Select <Other> Requires disk from manufacturer f...
        • 3-Number - 5 Insert Device Driver for Windows NT Disk 1 in th...
        • 3-Number - 6 Type the drive letter of the diskette drive that...
        • 3-Number - 7 Select Adaptec Inc.ATM ANA-59x0 Adapter(CIP), an...
        • 3-Number - 8 Add PVCs as follows:
        • 3-Number - 9 Change any of the editable parameters in the Ada...
        • 3-Number - 10 Select PCI from the Bus Type drop-down list in ...
        • 3-Number - 11 When the Setup Message dialog box appears, inse...
        • 3-Number - 12 If NT SNMP has not been installed on your works...
        • 3-Number - 13 Select OK to exit the Network Settings dialog b...
        • 3-Number - 14 If TCP/IP is installed on your workstation, the...
        • 3-Number - 15 Select Restart Now.
      • 1-2Head - Installing LANE Device Drivers
        • 1-3Head - Installing a LANE Client Driver
          • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
          • 3-Number - 2 Select the Network icon.
          • 3-Number - 3 Select Add Adapter from the Network Settings dia...
          • 3-Number - 4 Select <Other> Requires disk from manufacturer f...
          • 3-Number - 5 Insert the LAN Emulation Client diskette in the ...
          • 3-Number - 6 Type the drive letter of the diskette drive that...
          • 3-Number - 7 Select Adaptec Inc. ATM LANE Adapter, and then s...
          • 3-Number - 8 Select OK to exit the Network Settings dialog bo...
          • 3-Number - 9 If IPX/SPX is installed on your workstation, the...
          • 3-Number - 10 If TCP/IP is installed on your workstation, the...
          • 3-Number - 11 Add additional clients by following the above p...
        • 1-3Head - reconfiguring a LANE Client
          • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
          • 3-Number - 2 Select the Network icon.
          • 3-Number - 3 Select the LANE adapter you want to reconfigure,...
          • 3-Number - 4 Set the editable parameters as described in the ...
          • 3-Number - 5 Select Restart Now to save and initialize change...
        • 1-3Head - Removing a LANE client
          • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
          • 3-Number - 2 Select the Network icon.
          • 3-Number - 3 Select the LANE adapter you want to remove, such...
          • 3-Number - 4 Select Yes.
          • 3-Number - 5 In the Network Settings dialog box, select OK.
          • 3-Number - 6 Select Restart Now to save and initialize change...
      • 1-2Head - Installing the CIP ARP Server (Optional)
        • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
        • 3-Number - 2 Select the Network icon.
        • 3-Number - 3 Select Add Software from the Network Settings di...
        • 3-Number - 4 Select <Other> Requires disk from manufacturer f...
        • 3-Number - 5 Insert the RFC 1577 CIP ARP Server diskette in t...
        • 3-Number - 6 Type the drive letter of the diskette drive that...
        • 3-Number - 7 Select Adaptec ATM ARP Server, and then select O...
        • 3-Number - 8 Remove the RFC 1577 CIP ARP Server diskette from...
        • 3-Number - 9 Select OK to exit the Network Settings dialog bo...
        • 3-Number - 10 Select Restart Now to save and initialize chang...
        • 1-3Head - Determining the CIP ARP Server Address
          • 3-Start Number - 1 On the ARP server, enter the following command f...
          • 3-Number - 2 Write this address down. Then replace the 20th b...
        • 1-3Head - Reconfiguring the CIP ARP Server
          • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
          • 3-Number - 2 Select the Network icon.
          • 3-Number - 3 From the Installed Network Software list, select...
          • 3-Number - 4 Select OK to exit the Network Settings dialog bo...
          • 3-Number - 5 Select Restart Now to save and intialize changes...
    • 1-1Head - Using Device Drivers and Utilities
      • 1-2Head - Stopping ATM Drivers
        • 3-Start Number - 1 If your path is not set up, change to the direct...
        • 3-Number - 2 Stop the driver using the appropriate command be...
      • 1-2Head - Starting ATM Drivers
        • 3-Start Number - 1 In the Program Manager’s Main group window, sele...
        • 3-Number - 2 Change to the directory where you installed the ...
        • 3-Number - 3 Start the drivers you need to use by entering th...
        • 1-3Head - aarpcnfg.exe
        • 1-3Head - aatmcnfg.exe
        • 1-3Head - aatmdiag.exe
        • 1-3Head - aatmcons.exe
        • 1-3Head - acipcnfg.exe
        • 1-3Head - ndd.exe
    • 1-1Head - Locating Files and Directories
• 0-Chap Number - 6
  • 0-Chap Title - Installing ATM Software for DOS/Windows 3.1
    • 1-1Head - Configuring the Novell NetWare Client Kit for DOS/...
      • 3-Start Number - 1 Start the Novell NetWare Client installation, as...
      • 3-Number - 2 In the NetWare Client Install screen, select OTH...
      • 3-Number - 3 Remove the [NWClient] diskette from the floppy d...
      • 3-Number - 4 From the Network Board screen, select DOS ODI2ND...
      • 3-Number - 5 Complete the Novell NetWare installation.
      • 3-Number - 6 Reboot your system.
    • 1-1Head - Installing Adaptec ATM Software for DOS/ Windows
      • 3-Start Number - 1 Insert the ANA-59x0 DOS WIN diskette into a flop...
      • 3-Number - 2 Change to the drive that contains the ANA-59x0 D...
      • 3-Number - 3 At the Welcome To ATM Installation Utility! scre...
      • 3-Number - 4 To accept the default drive:\directory installat...
      • 3-Number - 5 At the INSTALLATION COMPLETE! screen, press Ente...
      • 3-Number - 6 At the Welcome To ATM Installation Utility! scre...
      • 3-Number - 7 At the LEC_AUTO_CFG screen, select one of the fo...
      • 3-Number - 8 If you selected options 1 or 3 in the previous s...
      • 3-Number - 9 If C:\WINDOWS is the name of your Windows direct...
      • 3-Number - 10 If C:\NWCLIENT is the name of your NetWare Clie...
      • 3-Number - 11 At the CONFIGURATION COMPLETE! screen, press En...
    • 1-1Head - Using Frame Types with Novell NetWare
• 0-Chap Number - 7
  • 0-Chap Title - Installing ATM Software for Windows 95
    • 1-1Head - Automatically Installing Adaptec ATM Software for ...
      • 3-Start Number - 1 Start Windows 95.
      • 3-Number - 2 Select Driver from disk provided by hardware man...
      • 3-Number - 3 Insert the Adaptec LANE Driver Windows 95 disket...
      • 3-Number - 4 Insert your Windows 95 CD-ROM in a CD-ROM drive ...
      • 3-Number - 5 Type the following command in the Copy files fro...
      • 3-Number - 6 Click Yes to restart your computer.
    • 1-1Head - Installing Adaptec ATM Client Drivers for Windows ...
      • 3-Start Number - 1 Click the Start button, click Settings, and then...
      • 3-Number - 2 Double-click the Network icon.
      • 3-Number - 3 Click Add.
      • 3-Number - 4 Select Adapter from the list, and click Add.
      • 3-Number - 5 Click Have Disk.
      • 3-Number - 6 Insert the Adaptec ALANE Drivers for Windows 95 ...
      • 3-Number - 7 Select one of the following from the Models list...
      • 3-Number - 8 Click OK.
      • 3-Number - 9 Insert your Windows 95 CD-ROM in a CD-ROM drive ...
      • 3-Number - 10 Type the following command in the Copy files fr...
      • 3-Number - 11 Click Yes to restart your computer.
    • 1-1Head - Configuring the Adapter
      • 3-Start Number - 1 Click, Start button, click Settings, and then cl...
      • 3-Number - 2 Double-click the Network icon.
      • 3-Number - 3 Click Properties.
      • 3-Number - 4 Click the Advanced tab, select a setting from th...
    • 1-1Head - Removing Adaptec ATM Software for Windows95
      • 3-Start Number - 1 Click the Start button, click Settings, and then...
      • 3-Number - 2 Double-click the Network icon.
      • 3-Number - 3 Select the Adaptec LANE Adapter you want to remo...
      • 3-Number - 4 Click Yes to restart your computer.
• 0-Chap Number - 8
  • 0-Chap Title - Installing ATM Software for Novell NetWare
    • 1-1Head - Installing Adaptec ATM Software for NetWare 3.12
      • 1-2Head - Installing the ATM Software
        • 3-Start Number - 1 Boot the server.
        • 3-Number - 2 Insert the ALANE Driver for Novell NetWare v1.0 ...
        • 3-Number - 3 At the server system console prompt, type the fo...
        • 3-Number - 4 Enter the following command, and press Enter:
        • 3-Number - 5 In the Install screen, press Esc to install the ...
        • 3-Number - 6 From the Select Operation menu, select Default I...
        • 3-Number - 7 When the Install screen appears
          • 3-StartSubnumber - a To specify a path other than the SYS:\SYSTEM dir...
          • 3-Subnumber - b To install the Adaptec ATM files in the SYS:\SYS...
        • 3-Number - 8 To exit the installation program, press Esc.
      • 1-2Head - Configuring the ATM Software
        • 3-Start Number - 1 Type the following command at the system prompt,...
        • 3-Number - 2 In the File Edit screen, type the following comm...
        • 3-Number - 3 Comment out load commands for any frame types yo...
        • 3-Number - 4 Configure the LANE Client by changing the parame...
    • 6-2Cntr Cell - 0
    • 6-2Cntr Cell - on
    • 6-2Cntr Cell - 30
    • 6-2Cntr Cell - 30
    • 6-2Cntr Cell - no
    • 6-2Cntr Cell -
    • 6-2Cntr Cell -
    • 6-2Cntr Cell - default
      • 3-Number - 5 Save and exit the file.
      • 1-2Head - Automatically Loading the ATM Driver
        • 3-Start Number - 1 Type the following command at the system prompt,...
        • 3-Number - 2 In the File Edit screen, type the following comm...
        • 3-Number - 3 Add the following command as the last line of th...
        • 3-Number - 4 Save and exit the file.
      • 1-2Head - Automating ATM Software Installation
        • 3-Start Number - 1 Type the following command at the system prompt,...
        • 3-Number - 2 In the File Edit screen, type the following comm...
        • 3-Number - 3 Add the following command line:
        • 3-Number - 4 Save and exit the file.
      • 1-1Head - Installing, Configuring, and Loading Adaptec ATM S...
        • 1-2Head - Installing and Configuring the ATM Software While ...
          • 3-Start Number - 1 Begin the procedure for installing Novell NetWar...
          • 3-Number - 2 When the Choose the Server Drivers - Network Dri...
          • 3-Number - 3 Insert the ALANE Driver for Novell NetWare v1.0 ...
          • 3-Number - 4 If the diskette is in drive A, press Enter. If t...
          • 3-Number - 5 From the Select a driver to install menu, select...
          • 3-Number - 6 From the Board ALANE_1 (Driver ALANE) Actions me...
          • 3-Number - 7 Press F3 to manually set IPX frame types.
          • 3-Number - 8 From the Frame Type List, select the appropriate...
          • 3-Number - 9 In the ALANE_1 Parameters section, configure the...
    • 6-2Cntr Cell - 1516
    • 6-2Cntr Cell - 0
    • 6-2Cntr Cell - on
    • 6-2Cntr Cell - 30
    • 6-2Cntr Cell - 30
    • 6-2Cntr Cell - no
    • 6-2Cntr Cell - default
      • 3-Number - 10 From the Board ALANE_1 (Driver ALANE) Actions m...
      • 3-Number - 11 Complete one of the following steps:
        • 3-StartSubnumber - a If you do not want to install additional drivers...
        • 3-Subnumber - b If you want to install additional drivers, selec...
      • 3-Number - 12 In the Choose the Server Driver - Summary scree...
      • 3-Number - 13 Continue with the Novell NetWare 4.1 installati...
      • 1-2Head - Installing and Configuring the ATM Software After ...
        • 3-Start Number - 1 Boot the server.
        • 3-Number - 2 At the server system console prompt, type the fo...
        • 3-Number - 3 From the Installation Options menu, select Drive...
        • 3-Number - 4 From the Driver Options menu, select Configure n...
        • 3-Number - 5 From the Additional Driver Actions list, select ...
        • 3-Number - 6 At the Select a driver menu, press Insert to ins...
        • 3-Number - 7 Press F3 to specify another path.
        • 3-Number - 8 In the Specify a directory path screen, type the...
        • 3-Number - 9 Insert the ALANE Driver for Novell NetWare v1.0 ...
        • 3-Number - 10 From the Select a driver to install menu, selec...
        • 3-Number - 11 At the Do you want to copy driver ALANE.LAN?, s...
        • 3-Number - 12 From the Board ALANE_1 (Driver ALANE) Actions m...
        • 3-Number - 13 Press F3 to manually set IPX frame types.
        • 3-Number - 14 From the Frame Type List, select the appropriat...
        • 3-Number - 15 From the ALANE_1 Protocols menu, select any oth...
        • 3-Number - 16 In the ALANE_1 Parameters section, configure th...
    • 6-2Cntr Cell - 1516
    • 6-2Cntr Cell - 0
    • 6-2Cntr Cell - on
    • 6-2Cntr Cell - 30
    • 6-2Cntr Cell - 30
    • 6-2Cntr Cell - no
    • 6-2Cntr Cell - default
      • 3-Number - 17 From the Board ALANE_1 (Driver ALANE) Actions m...
      • 3-Number - 18 At the system prompt, type your IPX network num...
      • 3-Number - 19 Complete one of the following steps:
        • 3-StartSubnumber - a If you do not want to install additional drivers...
        • 3-Subnumber - b If you want to install additional drivers, selec...
      • 3-Number - 20 From the Additional Driver Actions menu, select...
      • 3-Number - 21 From the Driver options menu, select Return to ...
      • 3-Number - 22 From the Installation Options menu, select Exit...
      • 3-Number - 23 From the Exit INSTALL menu, select Yes and pres...
      • 1-1Head - Automatically Loading the ATM Driver
      • 1-1Head - Manually Loading the ATM Driver
        • 3-Start Number - 1 Comment out the sys:\system\atms.ncf line in the...
        • 3-Number - 2 Bring down the server.
        • 3-Number - 3 Boot the server.
        • 3-Number - 4 At the server system console prompt, type the fo...
        • 3-Number - 5 At the Enter ELAN ID (0-3) prompt, type 0 (for t...
      • 1-1Head - Removing ATM Software
        • 1-2Head - Removing ATM Software for NetWare 3.12
          • 3-Start Number - 1 Type the following command at the system prompt,...
          • 3-Number - 2 In the File Edit screen, type the following comm...
          • 3-Number - 3 Delete the following command:
          • 3-Number - 4 Save and exit the file.
        • 1-2Head - Removing ATM Software for NetWare 4.1
          • 3-Start Number - 1 Boot the server.
          • 3-Number - 2 At the server system console prompt, type the fo...
          • 3-Number - 3 From the Installation Options menu, select Drive...
          • 3-Number - 4 From the Driver Options menu, select Configure n...
          • 3-Number - 5 From the Additional Driver Actions list, select ...
          • 3-Number - 6 From the Selected Network Drivers menu, select t...
          • 3-Number - 7 From the Unload driver anyway? menu, select Yes....
          • 3-Number - 8 When the message screen appears, press Enter.
          • 3-Number - 9 From the Additional Driver Actions menu, select ...
          • 3-Number - 10 From the Driver options menu, select Return to ...
          • 3-Number - 11 From the Installation Options menu, select Exit...
          • 3-Number - 12 From the Exit INSTALL menu, select Yes and pres...
      • 1-1Head - Updating ATM Software
        • 1-2Head - Updating ATM Software for NetWare 3.12
          • 3-Start Number - 1 Follow the instructions in Installing the ATM So...
          • 3-Number - 2 When prompted to overwrite existing files, selec...
          • 3-Number - 3 Configure the software by following the procedur...
        • 1-2Head - Updating ATM Software for NetWare 4.1
      • 1-1Head - Troubleshooting
        • 1-2Head - Status Commands
        • 1-2Head - Status/Error Messages
      • 1-1Head - Identifying Files
      • 1-1Head - Installing Patches
• 0-App Number - A
  • 0-App Title - Product Features and Specifications
    • 1-1Head - Features
      • 1-2Head - ANA5910/5930/5940 Hardware
    • 6-2Cntr Cell - ANA5910
    • 6-2Cntr Cell - 100 m
    • 6-2Cntr Cell - 25.6
    • 6-2Cntr Cell - ANA5930
    • 6-2Cntr Cell - 100 m
    • 6-2Cntr Cell - 155.0
    • 6-2Cntr Cell - ANA5940
    • 6-2Cntr Cell - 2 km
    • 6-2Cntr Cell - 155.0
      • 1-2Head - ANA5910/5930/5940 Software
      • 1-2Head - Features Summary
      • 1-1Head - Specifications
        • 1-2Head - Environment
        • 1-2Head - PCI Interface
        • 1-2Head - UTP and STP Interface (ANA5910/5930)
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - 1
    • 6-2Cntr Cell - Transmit A
    • 6-2Cntr Cell - Receive A
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - 2
    • 6-2Cntr Cell - Transmit B
    • 6-2Cntr Cell - Receive B
    • 6-2Cntr Cell - Transmit A
    • 6-2Cntr Cell - Receive A
    • 6-2Cntr Cell - 3
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Receive A
    • 6-2Cntr Cell - Transmit A
    • 6-2Cntr Cell - 4
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Receive B
    • 6-2Cntr Cell - Transmit B
    • 6-2Cntr Cell - 5
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Transmit B
    • 6-2Cntr Cell - Receive B
    • 6-2Cntr Cell - 6
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - 7
    • 6-2Cntr Cell - Receive A
    • 6-2Cntr Cell - Transmit A
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - Unused
    • 6-2Cntr Cell - 8
    • 6-2Cntr Cell - Receive B
    • 6-2Cntr Cell - Transmit B
      • 6-Fig Caption App - Figure A1. IBM Defacto to ATM Forum Standard Cabl...
      • 1-2Head - MMF Optical Interface (ANA5940)
        • 1-3Head - Receiver
        • 1-3Head - Transmitter
• 0-App Number - B
  • 0-App Title - Windows NT Specific Error Messages and Diagnostics...
    • 1-1Head - Error Messages
      • 1-3Head - User Error Messages
      • 1-2Head - Diagnostics Error Messages
      • 1-2Head - Driver Console Error Messages
      • 1-2Head - Diagnostics
        • 3-Start Number - 1 Make sure you have installed the adapter and the...
        • 3-Number - 2 Select the MS-DOS Command Prompt icon in the Mai...
        • 3-Number - 3 Change to the directory where ATM software is in...
        • 3-Number - 4 Stop all the drivers that are running. See Datab...
        • 3-Number - 5 Start the diagnostic utility by entering the fol...
        • 3-Number - 6 Execute the adapter selftest by entering the fol...
        • 3-Number - 7 Execute the extended SAR memory test by entering...
        • 3-Number - 8 To execute an optional external test, follow the...
          • 3-StartSubnumber - a Remove the ATM cable from the adapter’s ATM conn...
          • 3-Subnumber - b Place an external ATM loopback cable on the adap...
          • 3-Subnumber - c Test the external ATM connection to the adapter ...
          • 3-Subnumber - d Remove the loopback cable and reconnect the adap...
        • 3-Number - 9 Exit the diagnostic program:
        • 3-Number - 10 If all the diagnostic tests passed, restart the...
      • 1-2Head - Database File Parameters
      • 1-2Head - SNMP Agent
        • 3-Start Number - 1 Select the Control Panel icon in the Main progra...
        • 3-Number - 2 Select the Network icon.
        • 3-Number - 3 Select the Adaptec ATM Adapter under Installed A...
        • 1-3Head - HP OpenView or IBM NetView 6000
          • 3-Start Number - 1 From the Control pull-down menu, select SNMP Man...
          • 3-Number - 2 Select Management Database.
          • 3-Number - 3 Select ilmi.hpov.mib in the \etc\opt\adptaatm\bi...
          • 3-Number - 4 Select Add.
        • 1-3Head - SunNet Manager
          • 3-Start Number - 1 Copy the file ilmi.snm.mib from the \etc\opt\adp...
          • 3-Number - 2 Change to the directory agents in your SunNet Ma...
          • 3-Number - 3 Use the utility mib2schema to generate the schem...
          • 3-Number - 4 Enter SunNet Manager to see if the MIB was compi...
• 0-Other Title - Glossary
  • 9-GLetter - Acronyms
    • 9-GTerm2 - AAL
    • 9-GTerm2 - ANSI
    • 9-GTerm2 - API
    • 9-GTerm2 - ARP
    • 9-GTerm2 - ASIC
    • 9-GTerm2 - ATM
    • 9-GTerm2 - B-ISDN
    • 9-GTerm2 - BEPCR
    • 9-GTerm2 - CBR
    • 9-GTerm2 - CCITT
    • 9-GTerm2 - CL
    • 9-GTerm2 - CLP
    • 9-GTerm2 - DMA
    • 9-GTerm2 - EPROM
    • 9-GTerm2 - ESI
    • 9-GTerm2 - ETSI
    • 9-GTerm2 - GUI
    • 9-GTerm2 - IEEE
    • 9-GTerm2 - IETF RFC
    • 9-GTerm2 - ILMI
    • 9-GTerm2 - IP
    • 9-GTerm2 - IPX
    • 9-GTerm2 - ISDN
    • 9-GTerm2 - ISO
    • 9-GTerm2 - LAN
    • 9-GTerm2 - LATA
    • 9-GTerm2 - LED
    • 9-GTerm2 - LIS
    • 9-GTerm2 - MAC
    • 9-GTerm2 - MAN
    • 9-GTerm2 - MBS
    • 9-GTerm2 - MIB
    • 9-GTerm2 - MMF
    • 9-GTerm2 - MTU
    • 9-GTerm2 - NIC
    • 9-GTerm2 - NMS
    • 9-GTerm2 - NNI
    • 9-GTerm2 - OAM
    • 9-GTerm2 - P-NNI
    • 9-GTerm2 - PCI
    • 9-GTerm2 - PCR
    • 9-GTerm2 - PDU
    • 9-GTerm2 - PHY
    • 9-GTerm2 - PMD
    • 9-GTerm2 - PTI
    • 9-GTerm2 - PVC
    • 9-GTerm2 - QoS
    • 9-GTerm2 - RFC
    • 9-GTerm2 - Rx
    • 9-GTerm2 - SAR
    • 9-GTerm2 - SCR
    • 9-GTerm2 - SDH
    • 9-GTerm2 - SEAL
    • 9-GTerm2 - SMF
    • 9-GTerm2 - SNMP
    • 9-GTerm2 - SONET
    • 9-GTerm2 - STM
    • 9-GTerm2 - STM -n
    • 9-GTerm2 - STP
    • 9-GTerm2 - STS
    • 9-GTerm2 - SUNI
    • 9-GTerm2 - SVC
    • 9-GTerm2 - T1
    • 9-GTerm2 - T3
    • 9-GTerm2 - TC
    • 9-GTerm2 - TCP
    • 9-GTerm2 - Tx
    • 9-GTerm2 - UDP
    • 9-GTerm2 - UME
    • 9-GTerm2 - UNI
    • 9-GTerm2 - UTP
    • 9-GTerm2 - UU
    • 9-GTerm2 - VBR
    • 9-GTerm2 - VC
    • 9-GTerm2 - VCC
    • 9-GTerm2 - VCI
    • 9-GTerm2 - VPC
    • 9-GTerm2 - VPI
  • 9-GLetter - Glossary of Terms
  • 9-GLetter - A
    • 9-GTerm - AAL
    • 9-GTerm - Analog
    • 9-GTerm - ANSI
    • 9-GTerm - API
    • 9-GTerm - ARP (ATM)
    • 9-GTerm - ASIC
    • 9-GTerm - ATM
    • 9-GTerm - ATM Layer
    • 9-GTerm - ATM Switches
  • 9-GLetter - B
    • 9-GTerm - B-ISDN
    • 9-GTerm - Bandwidth
    • 9-GTerm - Best Effort
    • 9-GTerm - Bridge
    • 9-GTerm - Broadband
  • 9-GLetter - C
    • 9-GTerm - CBR
    • 9-GTerm - CCITT
    • 9-GTerm - Cell
    • 9-GTerm - Cell-Switching
    • 9-GTerm - Circuit-Switching
    • 9-GTerm - Channel
    • 9-GTerm - Classical IP
    • 9-GTerm - CLP
    • 9-GTerm - Connection-Oriented
    • 9-GTerm - Connectionless
    • 9-GTerm - Control Plane
  • 9-GLetter - D
    • 9-GTerm - Double Buffer
  • 9-GLetter - E
    • 9-GTerm - E1/E3
    • 9-GTerm - EPROM
    • 9-GTerm - Ethernet
  • 9-GLetter - G
    • 9-GTerm - Gateway
  • 9-GLetter - H
    • 9-GTerm - HEC
    • 9-GTerm - Hub
  • 9-GLetter - I
    • 9-GTerm - IEEE
    • 9-GTerm - ILMI
    • 9-GTerm - INARP
    • 9-GTerm - Internetwork
    • 9-GTerm - IP
    • 9-GTerm - IP Address
    • 9-GTerm - IPX
    • 9-GTerm - ISO
    • 9-GTerm - Isochronous
  • 9-GLetter - L
    • 9-GTerm - LAN
    • 9-GTerm - LAN Emulation
    • 9-GTerm - 8B/10B Line Coding
  • 9-GLetter - M
    • 9-GTerm - MAC
    • 9-GTerm - MAN
    • 9-GTerm - MIB
    • 9-GTerm - MMF/SMF
    • 9-GTerm - Multicasting
    • 9-GTerm - Multiplexing
  • 9-GLetter - N
    • 9-GTerm - Network
    • 9-GTerm - NMS
    • 9-GTerm - NNI
    • 9-GTerm - Node
  • 9-GLetter - O
    • 9-GTerm - Operating System
  • 9-GLetter - P
    • 9-GTerm - P-NNI
    • 9-GTerm - Packet-Switching
    • 9-GTerm - PCI
    • 9-GTerm - PCR
    • 9-GTerm - PDU
    • 9-GTerm - Physical-Layer (PHY)
    • 9-GTerm - PMD
    • 9-GTerm - Protocol
    • 9-GTerm - PTI
    • 9-GTerm - PVC
  • 9-GLetter - Q
    • 9-GTerm - QoS
  • 9-GLetter - R
    • 9-GTerm - RFC
    • 9-GTerm - Router
  • 9-GLetter - S
    • 9-GTerm - SAR
    • 9-GTerm - SCR
    • 9-GTerm - SDH
    • 9-GTerm - Server
    • 9-GTerm - Setup Program
    • 9-GTerm - Signaling
    • 9-GTerm - SNMP
    • 9-GTerm - SONET
    • 9-GTerm - SVC
  • 9-GLetter - T
    • 9-GTerm - T1/T3
    • 9-GTerm - TAXI
    • 9-GTerm - TC
    • 9-GTerm - TCP
    • 9-GTerm - Token Ring
  • 9-GLetter - U
    • 9-GTerm - UNI
    • 9-GTerm - UTP/STP
  • 9-GLetter - V
    • 9-GTerm - VBR
    • 9-GTerm - VC
    • 9-GTerm - VC Multiplexing
    • 9-GTerm - VCC
    • 9-GTerm - VCI/VPI
    • 9-GTerm - VLAN
    • 9-GTerm - VPC
  • 9-GLetter - W
    • 9-GTerm - WAN
• 0-Other Title - Index
  • GroupTitlesIX - A
  • GroupTitlesIX - B
  • GroupTitlesIX - C
  • GroupTitlesIX - D
  • GroupTitlesIX - E
  • GroupTitlesIX - F
  • GroupTitlesIX - H
  • GroupTitlesIX - I
  • GroupTitlesIX - L
  • GroupTitlesIX - M
  • GroupTitlesIX - N
  • GroupTitlesIX - O
  • GroupTitlesIX - P
  • GroupTitlesIX - Q
  • GroupTitlesIX - S
  • GroupTitlesIX - T
  • GroupTitlesIX - U
  • GroupTitlesIX - V
  • GroupTitlesIX - W