Document Outline

• installation guide
  • CentreCOM
  • AT-3714F AT-3726 Switch
• Electrical Safety and Installation Requirements fo...
  • STANDARDS: This product meets the following standa...
  • RADIATED ENERGY
  • Note: This equipment has been tested and found to ...
  • Note: Modifications or changes not expressly appro...
  • This Class A digital apparatus meets all requireme...
  • Cet appareil numérique de la classe A respecte tou...
    • RFI Emission EN55022 Class A
    • Immunity EN50082-1
      • IMPORTANT: This equipment must be operated in acco...
    • WICHTIG: Für den Betrieb dieses Gerätes ist die Ei...
    • VIGTIGT: Dette udstyr skal bruges i overensstemmel...
    • BELANGRIJK: Dit apparaat moet in overeenstemming m...
    • IMPORTANT : Cet équipement doit être utilisé confo...
    • TÄRKEÄÄ: Tätä laitetta on käytettävä turvaohjeiden...
    • IMPORTANTE: questa apparecchiatura deve essere uti...
    • VIKTIG: Dette utstyret skal brukes i samsvar med s...
    • IMPORTANTE: Este equipamento tem que ser operado s...
    • IMPORTANTE: La operación de este equipo debe lleva...
    • OBS! Alla nödvändiga försiktighetsåtgärder måste v...
• Electrical Safety and Installation Requirements fo...
  • STANDARDS: This product meets the following standa...
  • Manufacturers Name: Allied Teleysn International, ...
  • Manufacturers Telephone: 408-730-0950 Declares tha...
  • Complies with FCC Part 15B, Class B Limits:
  • This device complies with part 15 of the FCC Rules...
  • This equipment has been tested and found to comply...
  • - Reorient or relocate the receiving antenna.
  • - Increase the separation between the equipment an...
  • - Connect the equipment into an outlet on a circui...
  • - Consult the dealer or an experienced radio/TV te...
  • Changes and modifications not expressly approved b...
  • This Class B digital apparatus meets all requireme...
  • Cet appareil numérique de la classe B respecte tou...
    • RFI Emission EN55022 Class B
    • Immunity EN50082-1
      • IMPORTANT: This equipment must be operated in acco...
    • WICHTIG: Für den Betrieb dieses Gerätes ist die Ei...
    • VIGTIGT: Dette udstyr skal bruges i overensstemmel...
    • BELANGRIJK: Dit apparaat moet in overeenstemming m...
    • IMPORTANT : Cet équipement doit être utilisé confo...
    • TÄRKEÄÄ: Tätä laitetta on käytettävä turvaohjeiden...
    • IMPORTANTE: questa apparecchiatura deve essere uti...
    • VIKTIG: Dette utstyret skal brukes i samsvar med s...
    • IMPORTANTE: Este equipamento tem que ser operado s...
    • IMPORTANTE: La operación de este equipo debe lleva...
    • OBS! Alla nödvändiga försiktighetsåtgärder måste v...
  • Table of Contents
• Preface
  • Purpose of This Guide
  • How This Guide is Organized
  • Document Conventions
  • Where to Find Related AT-3714F, AT-3726 Guides
• AT-3714F, AT-3726 Hardware Description
  • Figure11 AT-3726 and AT-3714F Switches
  • Physical Description
  • Hardware Features
  • Network Management Features
  • MAC Addressing
    • Store and Forward/ CutThrough (fragment-free) Mod...
  • Transmit Pacing
    • Mirror Port
    • 10/100BaseTX/ FX Media Dependent Adapter
    • Table11 Media Dependent Adapter Features
      • RS232 Connector
      • Reset Button
      • AC Power Connector
• Installing the Switch
  • Verifying Switch Package Contents
  • Safety Information
  • Preparing the Site
  • Rack Mounting the Unit
    • To rack mount the unit
      • 1. Remove the snap-on plastic feet, as shown in Fi...
      • Figure21 Removing the Feet
        • 2. Remove all cables and power cord from the switc...
        • 3. Attach the rack-mounting brackets to each side ...
      • Figure22 Attaching Rack-Mounting Brackets
        • 4. Mount the unit in the rack.
        • 5. Apply power to the unit as follows:
    • Table21 LEDs
      • Setting Up Terminal for Local Management Using Ome...
        • 1. For local management, connect your terminal to ...
        • 2. Access your terminal emulator program. Press Re...
        • 3. Set your terminal to the following
      • Switch Default Settings
    • Table22 Switch Default Settings
  • Media Dependent Adapters
    • Figure23 AT-3701 and AT-3701F/SC MDA Front Pan...
    • Verifying Package Contents
    • Media Dependent Adapter Features
    • Table23 Media Dependent Adapter Features
      • Installing a Media Dependent Adapter
        • 1. Disconnect the switch’s power cord.
        • 2. Unscrew the three Phillips head screws on the b...
        • 3. The standoff on the MDA serves as a guide to sl...
        • 4. Slide the MDA into its empty slot making sure t...
        • 5. Attach the female 50-pin female connector to it...
        • Figure24 Guiding the MDA (AT-3701) Standoff in...
        • Figure25 Connecting the 50-Pin Female Connecto...
          • 6. Attach the three Phillips panhead screws that w...
          • 7. Apply power to the unit as follows:
      • MDA LEDs
    • Table24 Media Dependent Adapter LEDs
• Troubleshooting
  • At the First Sign of a Problem
  • Network Cabling Problems
    • Calling Technical Support
  • How the Switch Reports Problems
    • Table31 LEDs
      • PORT ACTIVITY LED on any Port is Off
        • 1. Make sure the data cables are secure.
        • 2. Make sure the device at the end of the connecti...
        • 3. Call AlliedTelesyn’s Technical Support.
      • PORT ACTIVITY LED on any Port is OFF
        • 1. Log on to Omega if you can and check the port s...
        • 2. Refer to the “AT-S20 User’s Guide” to check tha...
        • 3. Call AlliedTelesyn’s Technical Support.
      • POWER LED is Off
        • 1. Secure the power cord to the power source and c...
        • 2. Ensure that the voltage is within the required ...
        • 3. Log on to Omega and run Diagnostics if you can ...
        • 4. Call AlliedTelesyn’s Technical Support and rep...
      • FAULT LED is On
        • 1. Reset the switch either by:
        • 2. Make sure the RS232 connection from the local t...
        • 3. Unplug the switch from the power source, then p...
        • 4. Try to log on to Omega and run diagnostics (Sys...
        • 5. Call AlliedTelesyn’s Technical Support.
• Switch Configurations
  • Standalone Switch Configuration
    • Figure41 AT- 3726 Switch in Desktop Configurat...
    • Figure42 AT- 3714F Switch in Desktop Configura...
  • Workgroup Switch Configuration
    • Figure43 AT-3726 Switch in Department Configur...
    • Figure44 AT-3714F Switch in Department Configu...
• AppendixA
  • Translated Safety Information
• AppendixB
  • Technical Specifications
    • TableB-1 AT-3714F, AT-3726 Technical Specificat...
    • Table B-2 RJ45 Pin Assignments for AT-3714F (Mir...
    • Media Dependent Adapter Cabling Distances
      • Table B-3 MDA Maximum Cable Distances
      • Index
        • Numerics
        • A
        • B
        • C
        • D
        • E
        • F
        • L
        • M
        • O
        • P
        • R
        • S
        • T
        • W