Rack mounting the unit, To rack mount the unit, Remove the snap-on plastic feet, as shown in fi – Allied Telesis AT-3726 User Manual
Page 22: Figure21 removing the feet, Remove all cables and power cord from the switc, Rack mounting the unit -4
Advertising
Installing the Switch
2-4
Rack Mounting the Unit
Caution
Do not use power tools to perform this installation.
To rack mount the unit
1. Remove the snap-on plastic feet, as shown in Figure 2-1.
Figure 2-1 Removing the Feet
2. Remove all cables and power cord from the switch (if previously
attached).
Caution
Air vents must not be blocked and must have free access to the room
ambient air for cooling
Advertising
This manual is related to the following products: