Document Outline

• 1.0 ATTO FibreBridge Provides Storage Options
  • ATTO FibreBridge 2370E features, benefits
  • ATTO FibreBridge 2390C/R/D features, benefits
  • ATTO FibreBridge 2400C/R/D features, benefits
• 1.1 ATTO FibreBridge 2370E Physical Attributes
  • Board dimensions
  • Cooling and airflow
  • Power
  • Fibre Channel port
  • SCSI ports
  • Management access
  • LED indicators
    • Exhibit 1.1-1 FibreBridge 2370E board layout
• 1.2 ATTO FibreBridge 2390R/D Physical Attributes
  • Dimensions
  • Cooling and airflow
  • Power
  • Fibre Channel interface
  • SCSI ports
  • Management ports
  • Manual reset switch
  • LED indicators
    • Exhibit 1.2-1 FibreBridge 2390R/D dimensions with front panel LEDs and connector side details
• 1.3 ATTO FibreBridge 2390C Physical Attributes
  • Board dimensions
  • Cooling and airflow
  • Power
  • Fibre Channel port
  • SCSI ports
  • Management access
  • Manual reset switch
  • LED indicators
    • Exhibit 1.3-1 The FibreBridge 2390C connectors and LEDS.
    • Exhibit 1.3-2 The FibreBridge 2390C board layout.
• 1.4 ATTO FibreBridge 2400R/D Physical Attributes
  • Dimensions
  • Cooling and airflow
  • Power
  • Fibre Channel port
  • SCSI ports
  • Management ports
  • Manual reset switch
  • LED indicators
    • Exhibit 1.4-1 Connectors, LEDs and power receptacle on the connector side and LEDs on the faceplate.
• 1.5 ATTO FibreBridge 2400C Physical Attributes
  • Board dimensions
  • Cooling and airflow
  • Power
  • Fibre Channel port
  • SCSI ports
  • Management access
  • LED indicators
    • Exhibit 1.5-1 FibreBridge 2400C bracket detail and board layout.
• 2.0 Install the FibreBridge
  • Unpack the packing box; verify contents
  • Install the FibreBridge
  • Discover the IP address
  • Internet Explorer setup
  • Begin initial configuration
    • Exhibit 2.0-1 Brackets to install the FibreBridge 2390R/D or 2400R/D into a rack.
    • Exhibit 2.0-2 Typical FibreBridge connectors, LEDs and power receptacle.
• 3.0 Configure the FibreBridge
  • Preliminary steps
  • Page descriptions
• 3.1 Map Devices
  • FibreBridge mapping
  • SCSI device mapping
  • Mapping devices automatically
  • Mapping devices manually.
  • Multiple Node addressing (FB2400 only)
• 3.2 Monitor, Manage Remotely
  • Exhibit 3.0-3 The Remote Management page in the ExpressNAV interface.
  • SNMP-based monitoring
    • Exhibit 3.0-4 Events triggering SNMP notification for extended or standard trap generation, severity level and explanation.
  • Email messages provide error notification
    • Exhibit 3.0-5 The Email messages sent by the FibreBridge follow this format.
    • Exhibit 3.0-6 Events triggering an Email message, severity level and explanation.
• 4.0 Modify System Values
  • Preliminary steps
  • Modify passwords
  • Enhance performance
• 5.0 Update Firmware
• 6.0 Interface options
  • Using ExpressNAV
  • Opening an ExpressNAV session
  • Optimizing ExpressNAV in Internet Explorer
  • Using the serial port
  • Using Telnet
• Appendix A Cabling
  • SCSI port connections
  • Fibre Channel connections
  • Serial port connections
  • Ethernet connections
• Appendix B CLI provides ASCII-based Interface
  • Exhibit 0.0-1 Symbols, typefaces and abbreviations used to indicate functions and elements of the command line interface used in this manual.
  • CLI error messages
  • CLI summary reference
  • Command explanations
• Appendix C Standards and Compliances
  • FCC Standards: Radio and Television Interference
  • Canadian Standards
  • European Standards
  • Declaration of Conformity
  • Certification for the FibreBridge 2400 only
• Appendix D Warranty Information
  • Manufacturer limited warranty