H3C Technologies H3C S5120 Series Switches Instruction Manuals and User Guides
We have 31 Instruction Manuals and User Guides for H3C S5120 Series Switches H3C Technologies
Manuals
| Recognized languages: | English |
|---|---|
| Pages: | 8 |
| Size: | 690 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 42 |
| Size: | 2.41 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Overview
- SFP modules
- 100-Megabit SFP fiber transceiver module
- 622-Megabit SFP fiber transceiver module
- Gigabit SFP fiber transceiver module
- 2.5-Gigabit SFP fiber transceiver module
- 100-Megabit BIDI fiber transceiver module
- Gigabit BIDI fiber transceiver module
- BIDI GEPON OLT fiber transceiver module
- Gigabit CWDM fiber transceiver module
- Gigabit SFP copper transceiver module
- Gigabit SFP cable
- SFP+ modules
- XFP modules
- CX4 cables
- QSFP+ modules
- CFP modules
- CFP2 modules
- CXP modules
| Recognized languages: | English |
|---|---|
| Pages: | 64 |
| Size: | 766 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- IRF overview
- Configuring IRF
- General restrictions and configuration guidelines
- Setup and configuration task list
- Planning the IRF fabric setup
- Preconfiguring IRF member devices in standalone mode
- Enabling enhanced IRF mode in standalone mode
- Saving configuration to the next-startup configuration file
- Connecting physical IRF ports
- Setting the operating mode to IRF mode
- Accessing the IRF fabric
- Configuring IRF member devices in IRF mode
- Assigning an IRF domain ID to the IRF fabric
- Changing the member ID of a device
- Changing the priority of a member device
- Adding physical ports to an IRF port
- Enabling enhanced IRF mode in IRF mode
- Enabling auto reboot for IRF fabric merge
- Configuring a member device description
- Configuring IRF bridge MAC persistence
- Enabling software auto-update for system software image synchronization
- Setting the IRF link down report delay
- Enabling IRF link failure detection and auto-recovery
- Configuring MAD
- Fast-restoring IRF configuration for a one-MPU member
- Displaying and maintaining an IRF fabric
- IRF fabric configuration examples
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 237 |
| Size: | 2.80 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Using the CLI
- Logging in to the CLI
- Command conventions
- Using the undo form of a command
- CLI views
- Accessing the CLI online help
- Entering a command
- Understanding command-line errors
- Using the command history function
- Controlling the CLI output
- Configuring user privilege and command levels
- Saving the running configuration
- Displaying and maintaining CLI
- Logging in to the CLI
- Logging in to the Web interface
- Logging in through SNMP from an NMS
- Logging in through CWMP from an ACS
- Configuring user interfaces
- User interface assignment
- User interface numbering
- User interface configuration task list
- Configuring asynchronous serial interface attributes
- Configuring common settings for user interfaces
- Configuring the command auto-execute function
- Configuring a user privilege level for user interfaces
- Configuring access control on VTY user interfaces
- Configuring supported protocols on VTY user interfaces
- Configuring authentication mode
- Configuring command authorization
- Configuring command accounting
- Defining shortcut keys for starting terminal sessions/aborting tasks
- Sending messages to user interfaces
- Releasing connections to user interfaces
- Displaying and maintaining user interfaces
- User interface configuration examples
- Configuring Telnet login control
- Configuring FTP
- Using the device as an FTP client
- Establishing an FTP connection
- Managing the directories on the FTP server
- Working with the files on the FTP server
- Switching to another user account
- Maintaining and troubleshooting an FTP connection
- Terminating an FTP connection
- FTP client configuration example (standalone mode)
- FTP client configuration example (IRF mode)
- Using the device as an FTP server
- Displaying and maintaining FTP
- Using the device as an FTP client
- Configuring TFTP
- Managing the file system
- Managing configuration files
- Overview
- FIPS compliance
- Saving the running configuration
- Configuring configuration rollback
- Specifying a configuration file for the next startup
- Backing up the next-startup configuration file to a TFTP server
- Restoring the next-startup configuration file from a TFTP server
- Deleting the next-startup configuration file
- Displaying and maintaining configuration files
- Upgrading software
- Overview
- FIPS compliance
- Software upgrade task list
- Upgrading BootWare
- Upgrading the system software
- Installing hotfixes
- Upgrading MBUS daughter card software
- Upgrading CPLDs
- Upgrading or repairing the power software on an interface card
- Upgrading the power monitor software
- Upgrading fan monitor software
- Displaying and maintaining software image settings
- Software upgrade examples
- Performing ISSU
- Overview
- How ISSU works
- Performing an ISSU upgrade
- Performing a version rollback
- Displaying and maintaining ISSU
- MPU-based ISSU upgrade example (compatible version)
- MPU-based ISSU upgrade example (four members, compatible version)
- Member switch-based ISSU upgrade example (compatible or partially compatible version)
- Member switch-based ISSU upgrade example (four members, compatible or partially compatible version)
- Member switch-based ISSU upgrade example (incompatible version)
- Member switch-based ISSU upgrade example (four members, incompatible version)
- Member switches-based ISSU upgrade example (four members, incompatible version)
- Managing the device
- Configuring the device name
- Changing the system time
- Enabling displaying the copyright statement
- Configuring banners
- Configuring the exception handling method
- Rebooting the switch
- Configuring the system operating mode
- Scheduling jobs
- Configuring the port status detection timer
- Managing power supplies
- Configuring temperature thresholds for a card
- Isolating and diagnosing a card
- Configuring in-service hardware failure diagnosis and failure protection
- Configuring the size of shared buffers on an interface card
- Clearing unused 16-bit interface indexes
- Enabling automatic forwarding path check
- Enabling port recovery for the switch
- Verifying and diagnosing transceiver modules
- Displaying and maintaining device management
- Automatic configuration introduction
- Managing the system with BootWare
- Overview
- Restrictions and guidelines
- Using the BASIC-BOOTWARE menu
- Using the EXTEND-BOOTWARE menu
- Running the system software
- Upgrading system software through the console port
- Upgrading system software through the management Ethernet port
- Managing files
- Restoring the factory-default configuration
- Managing the BootWare image
- Clearing the console login password
- Managing storage media
- Using the product-specific submenu
- Using the EXTEND-ASSISTANT menu
- BootWare shortcut keys
- Disabling password recovery capability
- BootWare upgrade example
- System software upgrade examples
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 226 |
| Size: | 3.16 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Multicast overview
- Configuring IGMP snooping
- Overview
- IGMP snooping configuration task list
- Configuring basic IGMP snooping functions
- Configuring IGMP snooping port functions
- Configuring IGMP snooping policies
- Displaying and maintaining IGMP snooping
- IGMP snooping configuration examples
- Troubleshooting IGMP snooping
- Configuring multicast routing and forwarding
- Configuring IGMP
- Configuring PIM
- Overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring PIM-SSM
- Configuring common PIM features
- Displaying and maintaining PIM
- PIM configuration examples
- Troubleshooting PIM
- Configuring MLD snooping
- Overview
- MLD snooping configuration task list
- Configuring basic MLD snooping functions
- Configuring MLD snooping port functions
- Configuring MLD snooping policies
- Displaying and maintaining MLD snooping
- MLD snooping configuration examples
- Troubleshooting MLD snooping
- Configuring IPv6 multicast routing and forwarding
- Configuring MLD
- Configuring IPv6 PIM
- PIM overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring IPv6 PIM-SSM
- Configuring common IPv6 PIM features
- Displaying and maintaining IPv6 PIM
- IPv6 PIM configuration examples
- Troubleshooting IPv6 PIM
| Recognized languages: | English |
|---|---|
| Pages: | 120 |
| Size: | 1.29 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring Ethernet OAM
- Overview
- Ethernet OAM configuration task list
- Configuring basic Ethernet OAM functions
- Configuring the Ethernet OAM connection detection timers
- Configuring link monitoring
- Configuring the action a port takes after it receives an Ethernet OAM event from the remote end
- Displaying and maintaining Ethernet OAM
- Ethernet OAM configuration example
- Configuring CFD
- Configuring DLDP
- Overview
- Configuration restrictions and guidelines
- DLDP configuration task list
- Configuration prerequisites
- Enabling DLDP
- Setting the interval to send advertisement packets
- Setting the DelayDown timer
- Setting the port shutdown mode
- Configuring DLDP authentication
- Displaying and maintaining DLDP
- DLDP configuration examples
- Configuring VRRP
- Overview
- VRRP standard mode
- Protocols and standards
- Configuring IPv4 VRRP
- IPv4 VRRP configuration task list
- Specifying the IPv4 VRRP version
- Creating a VRRP group and assigning a virtual IP address
- Configuring the router priority, preemptive mode, and tracking function
- Configuring IPv4 VRRP packet attributes
- Enabling SNMP notifications for VRRP
- Disabling an IPv4 VRRP group
- Displaying and maintaining IPv4 VRRP
- Configuring IPv6 VRRP
- IPv4 VRRP configuration examples
- IPv6 VRRP configuration examples
- Troubleshooting VRRP
- Configuring BFD
- Configuring Track
- Overview
- Track configuration task list
- Associating the Track module with a detection module
- Associating the Track module with an application module
- Displaying and maintaining track entries
- Track configuration examples
- VRRP-Track-NQA collaboration configuration example
- Configuring BFD for a VRRP backup to monitor the master
- Configuring BFD for the VRRP master to monitor the uplinks
- Static routing-Track-NQA collaboration configuration example
- Static routing-Track-BFD collaboration configuration example
- VRRP-Track-interface management collaboration configuration example
| Recognized languages: | English |
|---|---|
| Pages: | 294 |
| Size: | 2.45 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring AAA
- Overview
- FIPS compliance
- AAA configuration considerations and task list
- Configuring AAA schemes
- Configuring local users
- Configuring RADIUS schemes
- Configuration task list
- Creating a RADIUS scheme
- Specifying the RADIUS authentication servers
- Specifying the RADIUS accounting servers and the relevant parameters
- Specifying the shared keys for secure RADIUS communication
- Specifying a VPN for the scheme
- Setting the username format and traffic statistics units
- Setting the maximum number of RADIUS request transmission attempts
- Setting the status of RADIUS servers
- Specifying the source IP address for outgoing RADIUS packets
- Setting RADIUS timers
- Configuring the accounting-on feature
- Configuring the IP addresses of the security policy servers
- Enabling SNMP notifications for RADIUS
- Displaying and maintaining RADIUS
- Configuring HWTACACS schemes
- Configuration task list
- Creating an HWTACACS scheme
- Specifying the HWTACACS authentication servers
- Specifying the HWTACACS authorization servers
- Specifying the HWTACACS accounting servers
- Specifying the shared keys for secure HWTACACS communication
- Specifying a VPN for the scheme
- Setting the username format and traffic statistics units
- Specifying the source IP address for outgoing HWTACACS packets
- Setting HWTACACS timers
- Displaying and maintaining HWTACACS
- Configuring LDAP schemes
- Configuration task list
- Creating an LDAP server
- Configuring the IP address of the LDAP server
- Specifying the LDAP version
- Setting the LDAP server timeout period
- Configuring administrator attributes
- Configuring LDAP user attributes
- Creating an LDAP scheme
- Specifying the LDAP authentication server
- Displaying and maintaining LDAP
- Configuring AAA methods for ISP domains
- Enabling the session-control feature
- Setting the maximum number of concurrent login users
- Displaying and maintaining AAA
- AAA for SSH users by an HWTACACS server
- Local authentication, HWTACACS authorization, and RADIUS accounting for SSH users
- Authentication and authorization for SSH users by a RADIUS server
- Authentication for SSH users by an LDAP server
- Troubleshooting RADIUS
- Troubleshooting HWTACACS
- Troubleshooting LDAP
- 802.1X overview
- Configuring 802.1X
- H3C implementation of 802.1X
- Configuration prerequisites
- 802.1X configuration task list
- Enabling 802.1X
- Enabling EAP relay or EAP termination
- Setting the port authorization state
- Specifying an access control method
- Setting the maximum number of concurrent 802.1X users on a port
- Setting the maximum number of authentication request attempts
- Setting the 802.1X authentication timeout timers
- Configuring the online user handshake function
- Configuring the authentication trigger function
- Specifying a mandatory authentication domain on a port
- Configuring the quiet timer
- Enabling the periodic online user re-authentication function
- Displaying and maintaining 802.1X
- 802.1X authentication configuration example
- Configuring MAC authentication
- Overview
- Configuration prerequisites
- Configuration task list
- Enabling MAC authentication
- Specifying a MAC authentication domain
- Configuring the user account format
- Configuring MAC authentication timers
- Setting the maximum number of concurrent MAC authentication users on a port
- Configuring MAC authentication delay
- Displaying and maintaining MAC authentication
- MAC authentication configuration examples
- Configuring port security
- Overview
- Configuration task list
- Enabling port security
- Setting port security's limit on the number of secure MAC addresses on a port
- Setting the port security mode
- Configuring port security features
- Configuring secure MAC addresses
- Ignoring authorization information from the server
- Enabling MAC move
- Displaying and maintaining port security
- Port security configuration examples
- Troubleshooting port security
- Configuring password control
- Overview
- FIPS compliance
- Password control configuration task list
- Enabling password control
- Setting global password control parameters
- Setting user group password control parameters
- Setting local user password control parameters
- Setting super password control parameters
- Displaying and maintaining password control
- Password control configuration example
- Managing public keys
- Configuring IPsec
- Overview
- IPsec tunnel establishment
- Implementing ACL-based IPsec
- Feature restrictions and guidelines
- ACL-based IPsec configuration task list
- Configuring an ACL
- Configuring an IPsec transform set
- Configuring a manual IPsec policy
- Configuring an IKE-based IPsec policy
- Applying an IPsec policy to an interface
- Enabling ACL checking for de-encapsulated packets
- Configuring the IPsec anti-replay function
- Binding a source interface to an IPsec policy
- Enabling QoS pre-classify
- Enabling logging of IPsec packets
- Configuring the DF bit of IPsec packets
- Configuring SNMP notifications for IPsec
- Displaying and maintaining IPsec
- IPsec configuration examples
- Configuring IKE
- Overview
- IKE configuration prerequisites
- IKE configuration task list
- Configuring an IKE profile
- Configuring an IKE proposal
- Configuring an IKE keychain
- Configuring the global identity information
- Configuring the IKE keepalive function
- Configuring the IKE NAT keepalive function
- Configuring IKE DPD
- Enabling invalid SPI recovery
- Setting the maximum number of IKE SAs
- Configuring SNMP notifications for IKE
- Displaying and maintaining IKE
- Main mode IKE with pre-shared key authentication configuration example
- Troubleshooting IKE
- IKE negotiation failed because no matching IKE proposals were found
- IKE negotiation failed because no IKE proposals or IKE keychains are referenced correctly
- IPsec SA negotiation failed because no matching IPsec transform sets were found
- IPsec SA negotiation failed due to invalid identity information
- Configuring SSH
- Overview
- FIPS compliance
- Configuring the device as an SSH server
- Configuring the device as an Stelnet client
- Configuring the device as an SFTP client
- Configuring the device as an SCP client
- Displaying and maintaining SSH
- Stelnet configuration examples
- SFTP configuration examples
- SCP configuration examples
- Configuring IP source guard
- Overview
- IP source guard configuration task list
- Configuring the IPv4 source guard function
- Configuring the IPv6 source guard function
- Displaying and maintaining IP source guard
- IP source guard configuration examples
- Configuring ARP attack protection
- ARP attack protection configuration task list
- Configuring unresolvable IP attack protection
- Configuring ARP packet rate limit
- Configuring source MAC-based ARP attack detection
- Configuring ARP packet source MAC consistency check
- Configuring ARP active acknowledgement
- Configuring authorized ARP
- Configuring ARP detection
- Configuring ARP automatic scanning and fixed ARP
- Configuring ARP gateway protection
- Configuring ARP filtering
- Configuring uRPF
- Configuring crypto engines
- Configuring FIPS
- Overview
- Configuration restrictions and guidelines
- Configuring FIPS mode
- FIPS self-tests
- Displaying and maintaining FIPS
- FIPS configuration examples
| Recognized languages: | English |
|---|---|
| Pages: | 191 |
| Size: | 8.13 MB |
Show table of contents
Read manual
Document Outline
- 00-1Cover.pdf
- 01-Chapter1 Product Overview.pdf
- 02-Chapter2 LPU Modules.pdf
- 03-Chapter3 Installation Preparations.pdf
- 04-Chapter4 Switch Installation.pdf
- Chapter 4 Switch Installation
- 4.1 Confirming Installation Preparation
- 4.2 Installation Flow
- 4.3 Mounting the Switch in User-Supplied Cabinet
- 4.4 Mounting the Switch in B68 Cabinet
- 4.5 Connecting PGND Wire and Power Cord
- 4.6 Installing the AC Power Distribution Box
- 4.7 Installing DC Power Distribution Box
- 4.8 Installing Cabling Rack
- 4.9 Installing Fan Tray
- 4.10 Installing LPU
- 4.11 Connecting Interface Cables
- 4.12 Cable Routing Recommendations
- 4.13 Cable Management
- 4.14 Verifying the Installation
- Chapter 4 Switch Installation
- 05-Chapter5 System Debugging.pdf
- 06-Chapter6 Switch Monitoring and Maintenance.pdf
- Chapter 6 Switch Monitoring and Maintenance
- 6.1 Monitoring the Switch
- 6.2 Hardware Maintenance
- 6.3 Software Upgrade
- 6.4 Password Loss
- Chapter 6 Switch Monitoring and Maintenance
- 07-AppendixA Engineering Labels for Cables.pdf
- Appendix A Engineering Labels for Cables
- A.1 Introduction to Labels
- A.2 Engineering Labels for Ethernet Cables
- A.3 Engineering Labels for Optical Fibers
- A.4 Engineering Labels for Power Cables
- Appendix A Engineering Labels for Cables
- 08-AppendixB Installation of B68 Cabinet.pdf
- Appendix B Installation of B68 Cabinet
- B.1 Installation Overview
- B.2 Cabinet Installation on the Cement Ground
- B.3 Cabinet Installation on Raised Floor
- B.3.1 Introduction to Support and Slide Rail
- B.3.2 Installation Flow
- B.3.3 Support Positioning
- B.3.4 Installation of Support and Slide Rail
- B.3.5 Installing Supporting Accessories of Raised Floor
- B.3.6 Cabinet Leveling
- B.3.7 Cabinet Combination Connection
- B.3.8 Cabinet Fastening
- B.3.9 Insulation Test
- B.3.10 Floor Recovery
- B.4 Quakeproof Reinforcement of Cabinet
- Appendix B Installation of B68 Cabinet
- 09-AppendixC Lightning Protection of the Switch.pdf
| Recognized languages: | English |
|---|---|
| Pages: | 194 |
| Size: | 1.80 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 CLI Configuration
- What Is CLI?
- Entering the CLI
- Command Conventions
- Undo Form of a Command
- CLI View Description
- Using the CLI Online Help
- Typing Commands
- Checking Command Line Errors
- Using Command History
- Controlling CLI Display
- Configuring User Privilege and Command Levels
- Configure user privilege level by using AAA authentication parameters
- Example of configuring a user privilege level by using AAA authentication parameters
- Configure the user privilege level under a user interface
- Example of configuring a user privilege level under a user interface
- Introduction
- Setting the authentication mode for user privilege level switch
- Switching the user privilege level
- Configure user privilege level by using AAA authentication parameters
- Saving the Current Configuration
- Displaying and Maintaining CLI
- 2 Login Methods
- 3 CLI Login
- 4 NMS Login
- 5 User Login Control
- 6 FTP Configuration
- 7 TFTP Configuration
- 8 File System Management
- 9 Configuration File Management
- Configuration File Overview
- Configuration Display
- Saving the Current Configuration
- Setting Configuration Rollback
- Specifying a Startup Configuration File for the Next System Startup
- Backing Up the Startup Configuration File
- Deleting the Startup Configuration File for the Next Startup
- Restoring the Startup Configuration File
- Displaying and Maintaining Device Configuration
- 10 Software Upgrade Configuration
- Device Software Overview
- Software Upgrade Methods
- Upgrading the Boot ROM Program Through a System Reboot
- Upgrading the Boot File Through a System Reboot
- Software Upgrade by Installing Hotfixes
- Patch and patch file
- Incremental patch
- Common patch and temporary patch
- IDLE state
- DEACTIVE state
- ACTIVE state
- RUNNING state
- Step-by-Step Patch Installation Task List
- Configuring the Patch File Location
- Loading a Patch File
- Activating Patches
- Confirming Running Patches
- Step-by-Step Patch Uninstallation Task List
- Stopping Running Patches
- Deleting Patches
- Patch and patch file
- Displaying and Maintaining Software Upgrade
- Software Upgrade Configuration Example
- 11 Device Management
- Device Management Overview
- Device Management Configuration Task List
- Configuring the Device Name
- Configuring the System Clock
- Enabling/Disabling the Display of Copyright Information
- Configuring a Banner
- Configuring the Exception Handling Method
- Rebooting a Device
- Scheduled Task Configuration
- Configuring Temperature Alarm Thresholds for a board
- Clearing the 16-bit Interface Indexes Not Used in the Current System
- Configuring the System Load Sharing Function
- Enabling Active/Standby Mode for Service Ports on SRPUs
- Configuring the Traffic Forwarding Mode of SRPUs
- Configuring the Working Mode of LPUs
- Enabling the Port Down Function Globally
- Enabling Expansion Memory Data Recovery Function on a board
- Identifying and Diagnosing Pluggable Transceivers
- Displaying and Maintaining Device Management Configuration
- 12 Index
| Recognized languages: | English |
|---|---|
| Pages: | 38 |
| Size: | 543 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 IRF Configuration
- Introduction to IRF
- Basic Concepts
- Working Process
- IRF Virtual Device Configuration Task List
- Switching Operating Mode
- Configuring an IRF Virtual Device
- Accessing an IRF Virtual Device
- Displaying and Maintaining an IRF Virtual Device
- IRF Virtual Device Configuration Examples
- 2 Index
| Recognized languages: | English |
|---|---|
| Pages: | 205 |
| Size: | 2.15 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 ARP Configuration
- ARP Overview
- Configuring ARP
- Configuring Gratuitous ARP
- Displaying and Maintaining ARP
- 2 Proxy ARP Configuration
- Proxy ARP Overview
- Enabling Proxy ARP
- Displaying and Maintaining Proxy ARP
- Proxy ARP Configuration Examples
- 3 IP Addressing Configuration
- 4 DHCP Overview
- 5 DHCP Server Configuration
- Introduction to DHCP Server
- DHCP Server Configuration Task List
- Configuring an Address Pool for the DHCP Server
- Configuration Task List
- Creating a DHCP Address Pool
- Configuring an Address Allocation Mode for a Common Address Pool
- Configuring Dynamic Address Allocation for an Extended Address Pool
- Configuring a Domain Name Suffix for the Client
- Configuring DNS Servers for the Client
- Configuring WINS Servers and NetBIOS Node Type for the Client
- Configuring the BIMS Server Information for the Client
- Configuring Gateways for the Client
- Configuring Option 184 Parameters for the Client with Voice Service
- Configuring the TFTP Server and Bootfile Name for the Client
- Configuring Self-Defined DHCP Options
- Enabling DHCP
- Enabling the DHCP Server on an Interface
- Applying an Extended Address Pool on an Interface
- Configuring the DHCP Server Security Functions
- Configuring the Handling Mode for Option 82
- Displaying and Maintaining the DHCP Server
- DHCP Server Configuration Examples
- Troubleshooting DHCP Server Configuration
- 6 DHCP Relay Agent Configuration
- Introduction to DHCP Relay Agent
- DHCP Relay Agent Configuration Task List
- Configuring the DHCP Relay Agent
- Displaying and Maintaining DHCP Relay Agent Configuration
- DHCP Relay Agent Configuration Examples
- Troubleshooting DHCP Relay Agent Configuration
- 7 DHCP Client Configuration
- 8 DHCP Snooping Configuration
- 9 IPv4 DNS Configuration
- 10 IPv6 DNS Configuration
- 11 IP Performance Optimization Configuration
- 12 UDP Helper Configuration
- 13 IPv6 Basics Configuration
- IPv6 Overview
- IPv6 Basics Configuration Task List
- Configuring Basic IPv6 Functions
- Configuring IPv6 NDP
- Configuring PMTU Discovery
- Configuring IPv6 TCP Properties
- Configuring ICMPv6 Packet Sending
- Displaying and Maintaining IPv6 Basics Configuration
- IPv6 Configuration Example
- Troubleshooting IPv6 Basics Configuration
- 14 DHCPv6 Configuration
- 15 Tunneling Configuration
- Tunneling Overview
- Tunneling Configuration Task List
- Configuring a Tunnel Interface
- Configuring an IPv6 Manual Tunnel
- Configuring a 6to4 Tunnel
- Configuring an ISATAP Tunnel
- Configuring an IPv4 over IPv4 Tunnel
- Configuring an IPv4 over IPv6 Tunnel
- Configuring an IPv6 over IPv6 Tunnel
- Configuring a GRE over IPv4 Tunnel
- Configuring a GRE over IPv6 Tunnel
- Displaying and Maintaining Tunneling Configuration
- Troubleshooting Tunneling Configuration
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 337 |
| Size: | 3.21 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 Ethernet Port Configuration
- Ethernet Port Numbering Conventions
- Combo Port Configuration
- Management Ethernet Interface Configuration
- Configuring Basic Settings of an Ethernet Port
- Setting Speed Options for Auto Negotiation on an Ethernet Port
- Configuring Flow Control on an Ethernet Port
- Configuring Link Change Suppression on a Port
- Performing Loopback Testing on an Ethernet Port
- Configuring a Port Group
- Configuring Traffic Storm Protection
- Setting the Statistics Polling Interval
- Enabling Forwarding of Jumbo Frames
- Enabling Loopback Detection on an Ethernet Port
- Configuring the MDI Mode for an Ethernet Port
- Testing the Cable on an Ethernet Port
- Configuring the Connection Mode of an Ethernet Port
- Displaying and Maintaining an Ethernet Port
- 2 EPON Configuration
- 3 OLT Configuration
- OLT Configuration
- OLT Configuration Task List
- EPON System Parameter Configuration
- Configuring Dynamic Bandwidth Allocation and Related Parameters
- Configuring Grant filtering on the OLT port
- Configuring the Link Type of an OLT Port
- Enabling Layer-2 Communication Between the ONUs Attached to an OLT Port
- Configuring Fiber Backup
- Displaying and Maintaining OLT Configuration
- OLT Configuration Examples
- OLT Configuration
- 4 ONU Remote Management Configuration
- ONU Configuration
- ONU Configuration Task List
- Creating an ONU Port
- Binding an ONU with an ONU Port
- Configuring Batch ONU Binding and Automatic ONU Binding
- Configuring the Management VLAN of the ONU
- Configure the ONU Bandwidth Allocation and Related Parameters
- Enabling Related Protocols on an ONU
- Configuring the Multicast Mode of the ONU
- Configuring the Link Type of an ONU Port
- Enabling FEC
- Configuring an ONU to Report Information to the OLT
- Configuring Traffic Encryption
- Testing the Link Between an ONU and the OLT
- Testing the Cable Connected to an UNI Port
- Deregistering an ONU
- Updating ONUs
- Restarting an ONU
- Displaying and Maintaining ONU Port Configuration
- Configuration Examples for ONU Remote Management
- ONU Configuration
- 5 UNI Port Configuration
- 6 Alarm Configuration
- 7 Supported Switch Features and Restrictions
- 8 Loopback Interface and Null Interface Configuration
- 9 MAC Address Table Configuration
- 10 MAC Information Configuration
- 11 Ethernet Link Aggregation Configuration
- Overview
- Ethernet Link Aggregation Configuration Task List
- Configuring an Aggregation Group
- Configuring an Aggregate Interface
- Configuring Load Sharing for Link Aggregation Groups
- Displaying and Maintaining Ethernet Link Aggregation
- Ethernet Link Aggregation Configuration Examples
- 12 Port Isolation Configuration
- 13 MSTP Configuration
- Overview
- Introduction to STP
- Introduction to RSTP
- Introduction to MSTP
- MSTP Configuration Task List
- Configuring MSTP
- Configuring an MST Region
- Configuring the Root Bridge or a Secondary Root Bridge
- Configuring the Work Mode of an MSTP Device
- Configuring the Priority of a Device
- Configuring the Maximum Hops of an MST Region
- Configuring the Network Diameter of a Switched Network
- Configuring Timers of MSTP
- Configuring the Timeout Factor
- Configuring the Maximum Port Rate
- Configuring Ports as Edge Ports
- Configuring Path Costs of Ports
- Configuring Port Priority
- Configuring the Link Type of Ports
- Configuring the Mode a Port Uses to Recognize/Send MSTP Packets
- Enabling the Output of Port State Transition Information
- Enabling the MSTP Feature
- Performing mCheck
- Configuring Digest Snooping
- Configuring No Agreement Check
- Configuring Protection Functions
- Remotely Configuring MSTP for an ONU
- Displaying and Maintaining MSTP
- MSTP Configuration Example
- 14 BPDU Tunneling Configuration
- 15 VLAN Configuration
- Introduction to VLAN
- Configuring Basic VLAN Settings
- Configuring Basic Settings of a VLAN Interface
- Port-Based VLAN Configuration
- MAC-Based VLAN Configuration
- Protocol-Based VLAN Configuration
- IP Subnet-Based VLAN Configuration
- Displaying and Maintaining VLAN
- 16 Super VLAN Configuration
- 17 Isolate-User-VLAN Configuration
- 18 Voice VLAN Configuration
- 19 GVRP Configuration
- 20 QinQ Configuration
- 21 VLAN Mapping Configuration
- 22 LLDP Configuration
- 23 Service Loopback Group Configuration
- 24 Index
| Recognized languages: | English |
|---|---|
| Pages: | 112 |
| Size: | 1.10 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 ACL Configuration
- 2 QoS Overview
- 3 QoS Configuration Approaches
- 4 Priority Mapping Configuration
- 5 Traffic Policing, Traffic Shaping, and Line Rate Configuration
- 6 Congestion Management Configuration
- 7 Congestion Avoidance
- 8 Traffic Filtering Configuration
- 9 Priority Marking Configuration
- 10 Traffic Redirecting Configuration
- 11 Aggregation CAR Configuration
- 12 Class-Based Accounting Configuration
- 13 QoS in an EPON System
- 14 Appendix A Default Priority Mapping Tables
- 15 Appendix B Introduction to Packet Precedences
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 430 |
| Size: | 4.50 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 Multicast Overview
- 2 IGMP Snooping Configuration
- IGMP Snooping Overview
- IGMP Snooping Configuration Task List
- Configuring Basic Functions of IGMP Snooping
- Configuring IGMP Snooping Port Functions
- Configuring IGMP Snooping Querier
- Configuring IGMP Snooping Proxying
- Configuring an IGMP Snooping Policy
- Configuration Prerequisites
- Configuring a Multicast Group Filter
- Configuring Multicast Source Port Filtering
- Configuring the Function of Dropping Unknown Multicast Data
- Configuring IGMP Report Suppression
- Configuring Maximum Multicast Groups that Can Be Joined on a Port
- Configuring Multicast Group Replacement
- Configuring 802.1p Precedence for IGMP Messages
- Displaying and Maintaining IGMP Snooping
- IGMP Snooping Configuration Examples
- Troubleshooting IGMP Snooping Configuration
- Appendix
- 3 Multicast VLAN Configuration
- Introduction to Multicast VLAN
- Multicast VLAN Configuration Task List
- Configuring Sub-VLAN-Based Multicast VLAN
- Configuring Port-Based Multicast VLAN
- Configuring the Maximum Number of Forwarding Entries in a Multicast VLAN
- Displaying and Maintaining Multicast VLAN
- Multicast VLAN Configuration Examples
- 4 Multicast Routing and Forwarding Configuration
- Multicast Routing and Forwarding Overview
- Configuration Task List
- Enabling IP Multicast Routing
- Configuring Multicast Routing and Forwarding
- Displaying and Maintaining Multicast Routing and Forwarding
- Configuration Examples
- Troubleshooting Multicast Routing and Forwarding
- 5 IGMP Configuration
- IGMP Overview
- IGMP Configuration Task List
- Configuring Basic Functions of IGMP
- Adjusting IGMP Performance
- Configuring IGMP SSM Mapping
- Configuring IGMP Proxying
- Displaying and Maintaining IGMP
- IGMP Configuration Examples
- Troubleshooting IGMP
- 6 PIM Configuration
- PIM Overview
- Configuring PIM-DM
- Configuring PIM-SM
- Configuring PIM-SSM
- Configuring PIM Common Features
- Displaying and Maintaining PIM
- PIM Configuration Examples
- Troubleshooting PIM Configuration
- 7 MSDP Configuration
- MSDP Overview
- MSDP Configuration Task List
- Configuring Basic Functions of MSDP
- Configuring an MSDP Peer Connection
- Configuring SA Messages Related Parameters
- Displaying and Maintaining MSDP
- MSDP Configuration Examples
- Troubleshooting MSDP
- 8 MBGP Configuration
- MBGP Overview
- Protocols and Standards
- MBGP Configuration Task List
- Configuring MBGP Basic Functions
- Controlling Route Advertisement and Reception
- Prerequisites
- Configuring MBGP Route Redistribution
- Configure Default Route Redistribution into MBGP
- Configuring MBGP Route Summarization
- Advertising a Default Route to an IPv4 MBGP Peer or Peer Group
- Configuring Outbound MBGP Route Filtering
- Configuring Inbound MBGP Route Filtering
- Configuring MBGP Route Dampening
- Configuring MBGP Route Attributes
- Tuning and Optimizing MBGP Networks
- Configuring a Large Scale MBGP Network
- Displaying and Maintaining MBGP
- MBGP Configuration Example
- 9 MLD Snooping Configuration
- MLD Snooping Overview
- MLD Snooping Configuration Task List
- Configuring Basic Functions of MLD Snooping
- Configuring MLD Snooping Port Functions
- Configuring MLD Snooping Querier
- Configuring MLD Snooping Proxying
- Configuring an MLD Snooping Policy
- Configuration Prerequisites
- Configuring an IPv6 Multicast Group Filter
- Configuring IPv6 Multicast Source Port Filtering
- Configuring Dropping Unknown IPv6 Multicast Data
- Configuring MLD Report Suppression
- Configuring Maximum Multicast Groups that Can Be Joined on a Port
- Configuring IPv6 Multicast Group Replacement
- Configuring 802.1p Precedence for MLD Messages
- Displaying and Maintaining MLD Snooping
- MLD Snooping Configuration Examples
- Troubleshooting MLD Snooping
- Appendix
- 10 IPv6 Multicast VLAN Configuration
- Introduction to IPv6 Multicast VLAN
- IPv6 Multicast VLAN Configuration Task List
- Configuring IPv6 Sub-VLAN-Based IPv6 Multicast VLAN
- Configuring Port-Based IPv6 Multicast VLAN
- Configuring the Maximum Number of Forwarding Entries in IPv6 Multicast VLANs
- Displaying and Maintaining IPv6 Multicast VLAN
- IPv6 Multicast VLAN Configuration Examples
- 11 IPv6 Multicast Routing and Forwarding Configuration
- IPv6 Multicast Routing and Forwarding Overview
- Configuration Task List
- Enabling IPv6 Multicast Routing
- Configuring IPv6 Multicast Routing and Forwarding
- Displaying and Maintaining IPv6 Multicast Routing and Forwarding
- Troubleshooting IPv6 Multicast Policy Configuration
- 12 MLD Configuration
- MLD Overview
- Configuration Task List
- Configuring Basic Functions of MLD
- Adjusting MLD Performance
- Configuring MLD SSM Mapping
- Configuring MLD Proxying
- Displaying and Maintaining MLD Configuration
- MLD Configuration Examples
- Troubleshooting MLD
- 13 IPv6 PIM Configuration
- IPv6 PIM Overview
- Configuring IPv6 PIM-DM
- Configuring IPv6 PIM-SM
- Configuring IPv6 PIM-SSM
- Configuring IPv6 PIM Common Features
- Displaying and Maintaining IPv6 PIM
- IPv6 PIM Configuration Examples
- Troubleshooting IPv6 PIM Configuration
- 14 IPv6 MBGP Configuration
- IPv6 MBGP Overview
- IPv6 MBGP Configuration Task List
- Configuring IPv6 MBGP Basic Functions
- Controlling Route Distribution and Reception
- Configuration Prerequisites
- Injecting a Local IPv6 MBGP Route
- Configuring IPv6 MBGP Route Redistribution
- Configuring IPv6 MBGP Route Summarization
- Advertising a Default Route to a Peer or Peer Group
- Configure Outbound IPv6 MBGP Route Filtering
- Configuring Inbound IPv6 MBGP Route Filtering
- Configuring IPv6 MBGP Route Dampening
- Configuring IPv6 MBGP Route Attributes
- Tuning and Optimizing IPv6 MBGP Networks
- Configuring a Large Scale IPv6 MBGP Network
- Displaying and Maintaining IPv6 MBGP
- IPv6 MBGP Configuration Example
- 15 Index
| Recognized languages: | English |
|---|---|
| Pages: | 211 |
| Size: | 1.85 MB |
Show table of contents
Read manual
Document Outline
- Title Page.pdf
- Preface.pdf
- Table of Contents
- 1 High Availability Overview
- 2 Active and Standby Switchover Configuration
- 3 Ethernet OAM Configuration
- 4 Extended OAM Configuration
- 5 CFD Configuration
- 6 DLDP Configuration
- Overview
- DLDP Configuration Task List
- Enabling DLDP
- Setting DLDP Mode
- Setting the Interval for Sending Advertisement Packets
- Setting the DelayDown Timer
- Setting the Port Shutdown Mode
- Configuring DLDP Authentication
- Resetting DLDP State
- Displaying and Maintaining DLDP
- DLDP Configuration Examples
- Troubleshooting DLDP
- 7 RRPP Configuration
- RRPP Overview
- RRPP Configuration Task List
- Creating an RRPP Domain
- Configuring Control VLANs
- Configuring Protected VLANs
- Configuring RRPP Rings
- Activating an RRPP Domain
- Configuring RRPP Timers
- Configuring RRPP Fast Detection
- Configuring an RRPP Ring Group
- Displaying and Maintaining RRPP
- RRPP Configuration Examples
- Troubleshooting
- 8 Smart Link Configuration
- Smart Link Overview
- Smart Link Configuration Task List
- Configuring a Smart Link Device
- Configuring an Associated Device
- Displaying and Maintaining Smart Link
- Smart Link Configuration Examples
- 9 Monitor Link Configuration
- 10 VRRP Configuration
- VRRP Overview
- VRRP Standard Protocol Mode
- Configuring VRRP for IPv4
- VRRP for IPv4 Configuration Task List
- Specifying the Type of MAC Addresses Mapped to Virtual IP Addresses
- Creating a VRRP Group and Configuring Virtual IP Address
- Configuring Router Priority, Preemptive Mode and Tracking Function
- Configuring VRRP Packet Attributes
- Enabling the Trap Function for VRRP
- Displaying and Maintaining VRRP for IPv4
- Configuring VRRP for IPv6
- VRRP for IPv6 Configuration Task List
- Specifying the Type of MAC Addresses Mapped to Virtual IPv6 Addresses
- Creating a VRRP Group and Configuring a Virtual IPv6 Address
- Configuring Router Priority, Preemptive Mode and Tracking Function
- Configuring VRRP Packet Attributes
- Displaying and Maintaining VRRP for IPv6
- IPv4-Based VRRP Configuration Examples
- IPv6-Based VRRP Configuration Examples
- Troubleshooting VRRP
- 11 BFD Configuration
- 12 Track Configuration
- Track Overview
- Track Configuration Task List
- Configuring Collaboration Between the Track Module and the Detection Modules
- Configuring Collaboration Between the Track Module and the Application Modules
- Displaying and Maintaining Track Entries
- Track Configuration Examples
- VRRP-Track-NQA Collaboration Configuration Example (The Master Monitors the Uplink)
- Configuring BFD for a VRRP Backup to Monitor the Master
- Configuring BFD for the VRRP Master to Monitor the Uplinks
- Static Routing-Track-NQA Collaboration Configuration Example
- Static Routing-Track-BFD Collaboration Configuration Example
- VRRP-Track-Interface Management Collaboration Configuration Example (The Master Monitors the Uplink Interface)
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 269 |
| Size: | 3.16 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 AAA Overview
- 2 AAA Configuration
- AAA Configuration Considerations and Task List
- Configuring AAA Schemes
- Configuring Local Users
- Configuring RADIUS Schemes
- RADIUS scheme configuration task list
- Creating a RADIUS scheme
- Specifying the RADIUS authentication/authorization servers
- Specifying the RADIUS accounting servers and relevant parameters
- Setting the shared keys for RADIUS packets
- Setting the maximum number of RADIUS request transmission attempts
- Setting the supported RADIUS server type
- Setting the status of RADIUS servers
- Configuring attributes for data to be sent to the RADIUS servers
- Specifying the source IP address for RADIUS packets to be sent
- Setting timers for controlling communication with RADIUS servers
- Specifying a security policy server
- Configuring interpretation of RADIUS class attribute as CAR parameters
- Enabling the RADIUS trap function
- Enabling the listening port of the RADIUS client
- Displaying and maintaining RADIUS
- Configuring HWTACACS Schemes
- HWTACACS configuration task list
- Creating an HWTACACS scheme
- Specifying the HWTACACS authentication servers
- Specifying the HWTACACS authorization servers
- Specifying the HWTACACS accounting servers
- Setting the shared keys for HWTACACS packets
- Configuring attributes for data to be sent to the HWTACACS servers
- Specifying the source IP address for HWTACACS packets to be sent
- Setting timers for controlling communication with HWTACACS servers
- Displaying and maintaining HWTACACS
- Configuring AAA Methods for ISP Domains
- Tearing Down User Connections Forcibly
- Configuring a NAS ID-VLAN Binding
- Displaying and Maintaining AAA
- 3 AAA Configuration Examples
- AAA Configuration Examples
- AAA for Telnet Users by an HWTACACS Server
- AAA for Telnet Users by Separate Servers
- Authentication/Authorization for SSH/Telnet Users by a RADIUS Server
- AAA for Portal Users by a RADIUS Server
- AAA for 802.1X Users by a RADIUS Server
- Level Switching Authentication for Telnet Users by an HWTACACS Server
- AAA Configuration Examples
- 4 Troubleshooting AAA
- 5 802.1X Configuration
- 802.1X Overview
- 802.1X Configuration
- Configuration Prerequisites
- 802.1X Configuration Task List
- Enabling 802.1X on a Port
- Specifying the Authentication Method of 802.1X Users
- Specifying the Port Authorization Mode
- Specifying the Access Control Method
- Configuring the Maximum Number of Users Accessible to a Port
- Setting the Maximum Number of Attempts for Sending an Authentication Request
- Setting 802.1X Timers
- Configuring the Online User Handshake Function
- Enabling the Proxy Detection Function
- Enabling the Multicast Trigger Function
- Enabling the Unicast Trigger Function
- Specifying a Mandatory Authentication Domain for a Port
- Enabling the Quiet Timer
- Enabling the Re-Authentication Function
- Configuring a Guest VLAN
- Configuring an Auth-Fail VLAN
- Displaying and Maintaining 802.1X
- 802.1X Configuration Examples
- 6 802.1X-Based EAD Fast Deployment Configuration
- 7 MAC Authentication Configuration
- MAC Authentication Overview
- MAC Authentication Timers
- Features Used Together with MAC Authentication
- MAC Authentication Configuration Task List
- Basic Configuration for MAC Authentication
- Specifying a Domain for MAC Authentication Users
- Displaying and Maintaining MAC Authentication
- MAC Authentication Configuration Examples
- 8 Portal Configuration
- Portal Overview
- Portal Configuration Task List
- Basic Portal Configuration
- Configuring a Portal-Free Rule
- Configuring an Authentication Subnet
- Specifying the Source IP Address for Portal Packets to Be Sent
- Logging out Users
- Specifying the Authentication Domain for Portal Users
- Specifying a NAS ID Profile for an Interface
- Setting the Maximum Number of Online Portal Users
- Displaying and Maintaining Portal
- Portal Configuration Examples
- Configuring Direct Portal Authentication
- Configuring Re-DHCP Portal Authentication
- Configuring Layer 3 Portal Authentication
- Configuring Direct Portal Authentication with Extended Functions
- Configuring Re-DHCP Portal Authentication with Extended Functions
- Configuring Layer 3 Portal Authentication with Extended Functions
- Troubleshooting Portal
- 9 Port Security Configuration
- Introduction to Port Security
- Port Security Configuration Task List
- Enabling Port Security
- Setting the Maximum Number of Secure MAC Addresses
- Setting the Port Security Mode
- Configuring Port Security Features
- Configuring Secure MAC Addresses
- Ignoring Authorization Information from the Server
- Displaying and Maintaining Port Security
- Port Security Configuration Examples
- Troubleshooting Port Security
- 10 User Profile Configuration
- 11 Public Key Configuration
- SSH2.0 Configuration
- SSH2.0 Overview
- Configuring the Device as an SSH Server
- Configuring the Device as an SSH Client
- Displaying and Maintaining SSH
- SSH Server Configuration Examples
- SSH Client Configuration Examples
- 12 SFTP Configuration
- 13 IP Source Guard Configuration
- IP Source Guard Overview
- Configuring a Static IP Source Guard Entry
- Configuring the Dynamic IP Source Guard Binding Function
- Displaying and Maintaining IP Source Guard
- IP Source Guard Configuration Examples
- Troubleshooting IP Source Guard
- 14 ARP Attack Protection Configuration
- ARP Attack Protection Overview
- ARP Attack Protection Configuration Task List
- Configuring ARP Defense Against IP Packet Attacks
- Configuring ARP Active Acknowledgement
- Configuring Source MAC Address Based ARP Attack Detection
- Configuring ARP Packet Rate Limit
- Configuring ARP Detection
- Introduction
- Configuring ARP Detection Based on Specified Objects
- Enabling ARP Detection Based on Static IP Source Guard Binding Entries/DHCP Snooping Entries/802.1X Security Entries/OUI MAC Addresses
- Displaying and Maintaining ARP Detection
- ARP Detection Configuration Example I
- ARP Detection Configuration Example II
- 15 URPF Configuration
- 16 Index
| Recognized languages: | English |
|---|---|
| Pages: | 208 |
| Size: | 2.02 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Table of Contents
- 1 System Maintaining and Debugging
- 2 NQA Configuration
- NQA Overview
- NQA Configuration Task List
- Configuring the NQA Server
- Enabling the NQA Client
- Creating an NQA Test Group
- Configuring an NQA Test Group
- Configuring the Collaboration Function
- Configuring Trap Delivery
- Configuring the NQA Statistics Function
- Configuring the History Records Saving Function
- Configuring Optional Parameters Common to an NQA Test Group
- Scheduling an NQA Test Group
- Displaying and Maintaining NQA
- NQA Configuration Examples
- ICMP Echo Test Configuration Example
- DHCP Test Configuration Example
- DNS Test Configuration Example
- FTP Test Configuration Example
- HTTP Test Configuration Example
- UDP Jitter Test Configuration Example
- SNMP Test Configuration Example
- TCP Test Configuration Example
- UDP Echo Test Configuration Example
- Voice Test Configuration Example
- DLSw Test Configuration Example
- NQA Collaboration Configuration Example
- 3 NTP Configuration
- NTP Overview
- NTP Configuration Task List
- Configuring the Operation Modes of NTP
- Configuring the Local Clock as a Reference Source
- Configuring Optional Parameters of NTP
- Configuring Access-Control Rights
- Configuring NTP Authentication
- Displaying and Maintaining NTP
- NTP Configuration Examples
- Configuring NTP Client/Server Mode
- Configuring the NTP Symmetric Mode
- Configuring NTP Broadcast Mode
- Configuring NTP Multicast Mode
- Configuring NTP Client/Server Mode with Authentication
- Configuring NTP Broadcast Mode with Authentication
- Configuring MPLS VPN Time Synchronization in Client/server Mode
- Configuring MPLS VPN Time Synchronization in Symmetric Peers Mode
- 4 IPC Configuration
- 5 PoE Configuration
- PoE Overview
- PoE Configuration Task List
- Enabling PoE
- Detecting PDs
- Configuring the PoE Power
- Configuring PoE Power Management
- Configuring the PoE Monitoring Function
- Configuring PoE Interface through PoE Profile
- Upgrading PSE Processing Software in Service
- Displaying and Maintaining PoE
- PoE Configuration Example
- Troubleshooting PoE
- 6 SNMP Configuration
- 7 MIB Style Configuration
- 8 RMON Configuration
- 9 Port Mirroring Configuration
- Introduction to Port Mirroring
- Configuring Local Port Mirroring
- Configuring Layer 2 Remote Port Mirroring
- Configuring Layer 3 Remote Port Mirroring
- Configuring Local Port Mirroring for an ONU
- Displaying and Maintaining Port Mirroring
- Port Mirroring Configuration Examples
- 10 Traffic Mirroring Configuration
- 11 sFlow Configuration
- 12 Information Center Configuration
- Information Center Overview
- Configuring Information Center
- Information Center Configuration Task List
- Outputting System Information to the Console
- Outputting System Information to a Monitor Terminal
- Outputting System Information to a Log Host
- Outputting System Information to the Trap Buffer
- Outputting System Information to the Log Buffer
- Outputting System Information to the SNMP Module
- Saving System Information to a Log File
- Configuring Synchronous Information Output
- Disabling a Port from Generating Link Up/Down Logging Information
- Displaying and Maintaining Information Center
- Information Center Configuration Examples
- 13 Index
| Recognized languages: | English |
|---|---|
| Pages: | 111 |
| Size: | 1.22 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring ACLs
- QoS overview
- Configuring a QoS policy
- Configuring priority mapping
- Overview
- Priority mapping configuration tasks
- Configuring a priority map
- Configuring a port to trust packet priority for priority mapping
- Changing the port priority of an interface
- Displaying and maintaining priority mapping
- Priority trust mode configuration example
- Priority mapping table and priority marking configuration example
- Configuring traffic policing, GTS, and rate limit
- Configuring queue-based accounting
- Configuring congestion management
- Configuring congestion avoidance
- Configuring traffic filtering
- Configuring priority marking
- Configuring nesting
- Configuring traffic redirecting
- Configuring aggregate CAR
- Configuring class-based accounting
- Appendixes
- Configuring data buffers
- Configuring time ranges
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 11 |
| Size: | 161 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 27 |
| Size: | 496 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 17 |
| Size: | 374 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 13 |
| Size: | 488 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 321 |
| Size: | 3.23 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring Ethernet interfaces
- Configuring a management Ethernet interface
- Ethernet interface naming conventions
- Configuring common Ethernet interface settings
- Configuring a combo interface (only applicable to S5560-30F-EI switches)
- Splitting a 40-GE interface and combining 10-GE breakout interfaces
- Configuring basic settings of an Ethernet interface
- Configuring the link mode of an Ethernet interface
- Configuring jumbo frame support
- Configuring physical state change suppression on an Ethernet interface
- Performing a loopback test on an Ethernet interface
- Configuring generic flow control on an Ethernet interface
- Configuring PFC on an Ethernet interface
- Enabling energy saving features on an Ethernet interface
- Setting the statistics polling interval
- Configuring the interface card operating mode
- Configuring a Layer 2 Ethernet interface
- Configuring a Layer 3 Ethernet interface
- Displaying and maintaining an Ethernet interface
- Configuring loopback, null, and inloopback interfaces
- Bulk configuring interfaces
- Configuring the MAC address table
- Overview
- MAC address table configuration task list
- Configuring MAC address entries
- Disabling MAC address learning
- Configuring the aging timer for dynamic MAC address entries
- Configuring the MAC learning limit on an interface
- Configuring the device to forward unknown frames after the MAC learning limit on an interface is reached
- Assigning MAC learning priority to an interface
- Enabling MAC address synchronization
- Enable MAC address move notifications
- Enabling ARP fast update for MAC address moves
- Enabling SNMP notifications for the MAC address table
- Displaying and maintaining the MAC address table
- MAC address table configuration example
- Configuring MAC Information
- Configuring Ethernet link aggregation
- Basic concepts
- Aggregating links in static mode
- Aggregating links in dynamic mode
- Edge aggregate interface
- Load sharing modes for link aggregation groups
- Ethernet link aggregation configuration task list
- Configuring an aggregation group
- Configuring an aggregate interface
- Setting the description for an aggregate interface
- Specifying ignored VLANs for a Layer 2 aggregate interface
- Setting the MTU for a Layer 3 aggregate interface
- Setting the minimum and maximum numbers of Selected ports for an aggregation group
- Setting the expected bandwidth for an aggregate interface
- Configuring an edge aggregate interface
- Shutting down an aggregate interface
- Restoring the default settings for an aggregate interface
- Configuring load sharing for link aggregation groups
- Enabling link-aggregation traffic redirection
- Displaying and maintaining Ethernet link aggregation
- Ethernet link aggregation configuration examples
- Layer 2 static aggregation configuration example
- Layer 2 dynamic aggregation configuration example
- Layer 2 aggregation load sharing configuration example
- Layer 2 edge aggregate interface configuration example
- Layer 3 static aggregation configuration example
- Layer 3 dynamic aggregation configuration example
- Layer 3 edge aggregate interface configuration example
- Configuring port isolation
- Configuring spanning tree protocols
- STP
- RSTP
- PVST
- MSTP
- Protocols and standards
- Spanning tree configuration task lists
- Setting the spanning tree mode
- Configuring an MST region
- Configuring the root bridge or a secondary root bridge
- Configuring the device priority
- Configuring the maximum hops of an MST region
- Configuring the network diameter of a switched network
- Configuring spanning tree timers
- Configuring the timeout factor
- Configuring the BPDU transmission rate
- Configuring edge ports
- Configuring path costs of ports
- Configuring the port priority
- Configuring the port link type
- Configuring the mode a port uses to recognize and send MSTP packets
- Enabling outputting port state transition information
- Enabling the spanning tree feature
- Performing mCheck
- Configuring Digest Snooping
- Configuring No Agreement Check
- Configuring TC Snooping
- Configuring protection functions
- Displaying and maintaining the spanning tree
- Spanning tree configuration example
- Configuring loop detection
- Configuring VLANs
- Overview
- Configuring basic VLAN settings
- Configuring basic settings of a VLAN interface
- Configuring port-based VLANs
- Configuring MAC-based VLANs
- Configuring IP subnet-based VLANs
- Configuring protocol-based VLANs
- Configuring a VLAN group
- Displaying and maintaining VLANs
- VLAN configuration examples
- Configuring super VLANs
- Configuring the private VLAN
- Configuration task list
- Configuration restrictions and guidelines
- Configuration procedure
- Displaying and maintaining the private VLAN
- Private VLAN configuration examples
- Configuring voice VLANs
- Overview
- Methods of identifying IP phones
- Advertising the voice VLAN information to IP phones
- IP phone access methods
- Configuring a voice VLAN on a port
- Enabling LLDP for automatic IP phone discovery
- Configuring LLDP or CDP to advertise a voice VLAN
- Dynamically advertising an authorization VLAN through LLDP or CDP
- Displaying and maintaining voice VLANs
- Voice VLAN configuration examples
- Configuring MVRP
- MRP
- MVRP registration modes
- Protocols and standards
- MVRP configuration task list
- Configuration restrictions and guidelines
- Configuration prerequisites
- Enabling MVRP
- Configuring an MVRP registration mode
- Configuring MRP timers
- Enabling GVRP compatibility
- Displaying and maintaining MVRP
- MVRP configuration example
- Configuring QinQ
- Configuring VLAN mapping
- Overview
- General configuration restrictions and guidelines
- VLAN mapping configuration task list
- Configuring one-to-one VLAN mapping
- Configuring many-to-one VLAN mapping
- Configuring one-to-two VLAN mapping
- Configuring two-to-two VLAN mapping
- Displaying and maintaining VLAN mapping
- VLAN mapping configuration examples
- Configuring LLDP
- Overview
- LLDP configuration task list
- Performing basic LLDP configurations
- Enabling LLDP
- Configuring the LLDP bridge mode
- Setting the LLDP operating mode
- Setting the LLDP reinitialization delay
- Enabling LLDP polling
- Configuring the advertisable TLVs
- Configuring the management address and its encoding format
- Setting other LLDP parameters
- Setting an encapsulation format for LLDP frames
- Configuring CDP compatibility
- Configuring LLDP trapping and LLDP-MED trapping
- Displaying and maintaining LLDP
- LLDP configuration examples
- Configuring service loopback groups
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 291 |
| Size: | 3.28 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring ARP
- Overview
- Configuring a static ARP entry
- Configuring a multiport ARP entry
- Setting the maximum number of dynamic ARP entries for a device
- Setting the maximum number of dynamic ARP entries for an interface
- Setting the aging timer for dynamic ARP entries
- Enabling dynamic ARP entry check
- Enabling ARP logging
- Displaying and maintaining ARP
- Configuration examples
- Configuring gratuitous ARP
- Configuring proxy ARP
- Configuring ARP snooping
- Configuring IP addressing
- DHCP overview
- Configuring the DHCP server
- Overview
- DHCP server configuration task list
- Configuring an address pool on the DHCP server
- Configuration task list
- Creating a DHCP address pool
- Specifying IP address ranges for a DHCP address pool
- Specifying gateways for DHCP clients
- Specifying a domain name suffix for DHCP clients
- Specifying DNS servers for DHCP clients
- Specifying WINS servers and NetBIOS node type for DHCP clients
- Specifying BIMS server for DHCP clients
- Specifying the configuration file for DHCP client auto-configuration
- Specifying a server for DHCP clients
- Configuring Option 184 parameters for DHCP clients
- Customizing DHCP options
- Enabling DHCP
- Enabling the DHCP server on an interface
- Applying an address pool on an interface
- Configuring IP address conflict detection
- Enabling handling of Option 82
- Configuring DHCP server compatibility
- Setting the DSCP value for DHCP packets sent by the DHCP server
- Displaying and maintaining the DHCP server
- DHCP server configuration examples
- Troubleshooting DHCP server configuration
- Configuring the DHCP relay agent
- Overview
- DHCP relay agent configuration task list
- Enabling DHCP
- Enabling the DHCP relay agent on an interface
- Specifying DHCP servers on a relay agent
- Configuring the DHCP relay agent security functions
- Configuring the DHCP relay agent to release an IP address
- Configuring Option 82
- Setting the DSCP value for DHCP packets sent by the DHCP relay agent
- Displaying and maintaining the DHCP relay agent
- DHCP relay agent configuration examples
- Troubleshooting DHCP relay agent configuration
- Configuring the DHCP client
- Configuring DHCP snooping
- Overview
- DHCP snooping configuration task list
- Configuring basic DHCP snooping
- Configuring Option 82
- Configuring DHCP snooping entry auto backup
- Enabling DHCP starvation attack protection
- Enabling DHCP-REQUEST attack protection
- Setting the maximum number of DHCP snooping entries
- Configuring DHCP packet rate limit
- Displaying and maintaining DHCP snooping
- DHCP snooping configuration examples
- Configuring the BOOTP client
- Configuring DNS
- Overview
- DNS configuration task list
- Configuring the IPv4 DNS client
- Configuring the IPv6 DNS client
- Configuring the DNS proxy
- Configuring DNS spoofing
- Specifying the source interface for DNS packets
- Configuring the DNS trusted interface
- Setting the DSCP value for outgoing DNS packets
- Displaying and maintaining IPv4 DNS
- IPv4 DNS configuration examples
- IPv6 DNS configuration examples
- Troubleshooting IPv4 DNS configuration
- Troubleshooting IPv6 DNS configuration
- Configuring DDNS
- Basic IP forwarding on the device
- Configuring load sharing
- Configuring fast forwarding
- Configuring IRDP
- Optimizing IP performance
- Enabling an interface to receive and forward directed broadcasts destined for the directly connected network
- Configuring MTU for an interface
- Configuring TCP MSS for an interface
- Configuring TCP path MTU discovery
- Enabling TCP SYN Cookie
- Configuring the TCP buffer size
- Configuring TCP timers
- Enabling sending ICMP error messages
- Disabling forwarding ICMP fragments
- Configuring rate limit for ICMP error messages
- Specifying the source address for ICMP packets
- Displaying and maintaining IP performance optimization
- Configuring UDP helper
- Configuring basic IPv6 settings
- Overview
- IPv6 transition technologies
- Protocols and standards
- IPv6 basics configuration task list
- Assigning IPv6 addresses to interfaces
- Configuring IPv6 ND
- Configuring a static neighbor entry
- Setting the maximum number of dynamic neighbor entries
- Setting the aging timer for ND entries in stale state
- Minimizing link-local ND entries
- Setting the hop limit
- Configuring parameters for RA messages
- Configuring the maximum number of attempts to send an NS message for DAD
- Enabling ND proxy
- Configuring path MTU discovery
- Controlling sending ICMPv6 messages
- Enabling a device to discard IPv6 packets that contain extension headers
- Displaying and maintaining IPv6 basics
- IPv6 basics configuration example
- Troubleshooting IPv6 basics configuration
- DHCPv6 overview
- Configuring the DHCPv6 server
- Overview
- Configuration task list
- Configuring IPv6 prefix assignment
- Configuring IPv6 address assignment
- Configuring network parameters assignment
- Configuring the DHCPv6 server on an interface
- Setting the DSCP value for DHCPv6 packets sent by the DHCPv6 server
- Displaying and maintaining the DHCPv6 server
- DHCPv6 server configuration examples
- Configuring the DHCPv6 relay agent
- Overview
- DHCPv6 relay agent configuration task list
- Enabling the DHCPv6 relay agent on an interface
- Specifying DHCPv6 servers on the relay agent
- Setting the DSCP value for DHCPv6 packets sent by the DHCPv6 relay agent
- Displaying and maintaining the DHCPv6 relay agent
- DHCPv6 relay agent configuration example
- Configuring the DHCPv6 client
- Overview
- Configuration restrictions and guidelines
- DHCPv6 client configuration task list
- Configuring IPv6 address acquisition
- Configuring IPv6 prefix acquisition
- Configuring stateless DHCPv6
- Setting the DSCP value for DHCPv6 packets sent by the DHCPv6 client
- Displaying and maintaining DHCPv6 client
- DHCPv6 client configuration examples
- Configuring DHCPv6 snooping
- Overview
- H3C implementation of Option 18 and Option 37
- DHCPv6 snooping configuration task list
- Configuring basic DHCPv6 snooping
- Configuring Option 18 and Option 37
- Configuring DHCPv6 snooping entry auto backup
- Setting the maximum number of DHCPv6 snooping entries
- Enabling DHCPv6-REQUEST check
- Configuring DHCPv6 packet rate limit
- Displaying and maintaining DHCPv6 snooping
- DHCPv6 snooping configuration example
- Configuring IPv6 fast forwarding
- Configuring tunneling
- Overview
- Tunneling configuration task list
- Configuring a tunnel interface
- Configuring an IPv6 over IPv4 manual tunnel
- Configuring a 6to4 tunnel
- Configuring an ISATAP tunnel
- Configuring an IPv4 over IPv4 tunnel
- Configuring an IPv4 over IPv6 tunnel
- Configuring an IPv6 over IPv6 tunnel
- Displaying and maintaining tunneling configuration
- Troubleshooting tunneling
- Configuring GRE
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 10 |
| Size: | 551 KB |
Show table of contents
Read manual
| Recognized languages: | English |
|---|---|
| Pages: | 510 |
| Size: | 4.95 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring basic IP routing
- Routing table
- Dynamic routing protocols
- Route preference
- Load sharing
- Route backup
- Route recursion
- Route redistribution
- Extension attribute redistribution
- Configuring the maximum lifetime for routes and labels in the RIB
- Configuring the maximum lifetime for routes in the FIB
- Configuring the maximum number of ECMP routes
- Enabling the enhanced ECMP mode
- Enabling support for IPv6 routes with prefixes longer than 64 bits
- Displaying and maintaining a routing table
- Configuring static routing
- Configuring a static route
- Configuring BFD for static routes
- Configuring static route FRR
- Displaying and maintaining static routes
- Static route configuration examples
- Configuring a default route
- Configuring RIP
- Overview
- RIP configuration task list
- Configuring basic RIP
- Configuring RIP route control
- Tuning and optimizing RIP networks
- Configuration prerequisites
- Configuring RIP timers
- Configuring split horizon and poison reverse
- Configuring the maximum number of ECMP routes
- Enabling zero field check on incoming RIPv1 messages
- Enabling source IP address check on incoming RIP updates
- Configuring RIPv2 message authentication
- Specifying a RIP neighbor
- Configuring RIP network management
- Configuring the RIP packet sending rate
- Setting the maximum length of RIP packets
- Configuring RIP GR
- Configuring BFD for RIP
- Configuring RIP FRR
- Displaying and maintaining RIP
- RIP configuration examples
- Basic RIP configuration example
- RIP route redistribution configuration example
- RIP interface additional metric configuration example
- RIP summary route advertisement configuration example
- BFD for RIP configuration example (single-hop echo detection for a directly connected neighbor)
- BFD for RIP configuration example (single hop echo detection for a specific destination)
- BFD for RIP configuration example (bidirectional detection in BFD control packet mode)
- RIP FRR configuration example
- Configuring OSPF
- Overview
- OSPF configuration task list
- Enabling OSPF
- Configuring OSPF areas
- Configuring OSPF network types
- Configuring OSPF route control
- Configuration prerequisites
- Configuring OSPF route summarization
- Configuring received OSPF route filtering
- Configuring Type-3 LSA filtering
- Configuring an OSPF cost for an interface
- Configuring the maximum number of ECMP routes
- Configuring OSPF preference
- Configuring OSPF route redistribution
- Advertising a host route
- Tuning and optimizing OSPF networks
- Configuration prerequisites
- Configuring OSPF timers
- Specifying LSA transmission delay
- Specifying SPF calculation interval
- Specifying the LSA arrival interval
- Specifying the LSA generation interval
- Disabling interfaces from receiving and sending OSPF packets
- Configuring stub routers
- Configuring OSPF authentication
- Adding the interface MTU into DD packets
- Configuring a DSCP value for OSPF packets
- Configuring the maximum number of external LSAs in LSDB
- Configuring OSPF exit overflow interval
- Enabling compatibility with RFC 1583
- Logging neighbor state changes
- Configuring OSPF network management
- Configuring the LSU transmit rate
- Enabling OSPF ISPF
- Configuring prefix suppression
- Configuring prefix prioritization
- Configuring OSPF PIC
- Configuring the number of OSPF logs
- Configuring OSPF GR
- Configuring OSPF NSR
- Configuring BFD for OSPF
- Configuring OSPF FRR
- Displaying and maintaining OSPF
- OSPF configuration examples
- Basic OSPF configuration example
- OSPF route redistribution configuration example
- OSPF route summarization configuration example
- OSPF stub area configuration example
- OSPF NSSA area configuration example
- OSPF DR election configuration example
- OSPF virtual link configuration example
- OSPF GR configuration example
- OSPF NSR configuration example
- BFD for OSPF configuration example
- OSPF FRR configuration example
- Troubleshooting OSPF configuration
- Configuring IS-IS
- Overview
- IS-IS configuration task list
- Configuring basic IS-IS
- Configuring IS-IS route control
- Configuration prerequisites
- Configuring IS-IS link cost
- Specifying a preference for IS-IS
- Configuring the maximum number of ECMP routes
- Configuring IS-IS route summarization
- Advertising a default route
- Configuring IS-IS route redistribution
- Configuring IS-IS route filtering
- Configuring IS-IS route leaking
- Tuning and optimizing IS-IS networks
- Configuration prerequisites
- Specifying the interval for sending IS-IS hello packets
- Specifying the IS-IS hello multiplier
- Specifying the interval for sending IS-IS CSNP packets
- Configuring a DIS priority for an interface
- Enabling source address check for hello packets on a PPP interface
- Disabling an interface from sending/receiving IS-IS packets
- Enabling an interface to send small hello packets
- Configuring LSP parameters
- Controlling SPF calculation interval
- Configuring convergence priorities for specific routes
- Setting the LSDB overload bit
- Configuring system ID to host name mappings
- Enabling the logging of neighbor state changes
- Enabling IS-IS ISPF
- Configuring IS-IS network management
- Enhancing IS-IS network security
- Configuring IS-IS GR
- Configuring IS-IS NSR
- Configuring BFD for IS-IS
- Configuring IS-IS FRR
- Displaying and maintaining IS-IS
- IS-IS configuration examples
- Configuring BGP
- Overview
- BGP configuration task list
- Configuring basic BGP
- Generating BGP routes
- Controlling route distribution and reception
- Controlling BGP path selection
- Specifying a preferred value for routes received
- Configuring preferences for BGP routes
- Configuring the default local preference
- Configuring the MED attribute
- Configuring the NEXT_HOP attribute
- Configuring the AS_PATH attribute
- Permitting local AS number to appear in routes from a peer or peer group
- Disabling BGP from considering AS_PATH during optimal route selection
- Advertising a fake AS number to a peer or peer group
- Configuring AS number substitution
- Removing private AS numbers from updates sent to an EBGP peer or peer group
- Ignoring the first AS number of EBGP route updates
- Tuning and optimizing BGP networks
- Configuring the keepalive interval and hold time
- Configuring the interval for sending updates for the same route
- Enabling BGP to establish an EBGP session over multiple hops
- Enabling immediate re-establishment of direct EBGP connections upon link failure
- Enabling 4-byte AS number suppression
- Enabling MD5 authentication for BGP peers
- Configuring BGP load balancing
- Configuring IPsec for IPv6 BGP
- Disabling BGP to establish a session to a peer or peer group
- Configuring GTSM for BGP
- Configuring BGP soft-reset
- Protecting an EBGP peer when memory usage reaches level 2 threshold
- Configuring a large-scale BGP network
- Configuring BGP GR
- Configuring BGP NSR
- Enabling SNMP notifications for BGP
- Enabling logging of session state changes
- Configuring BFD for BGP
- Configuring BGP FRR
- Configuring 6PE
- Displaying and maintaining BGP
- IPv4 BGP configuration examples
- Basic BGP configuration example
- BGP and IGP route redistribution configuration example
- BGP route summarization configuration example
- BGP load balancing configuration example
- BGP community configuration example
- BGP route reflector configuration example
- BGP confederation configuration example
- BGP path selection configuration example
- BGP GR configuration example
- BFD for BGP configuration example
- BGP FRR configuration example
- IPv6 BGP configuration examples
- Troubleshooting BGP
- Configuring PBR
- Configuring IPv6 static routing
- Configuring an IPv6 static route
- Configuring BFD for IPv6 static routes
- Displaying and maintaining IPv6 static routes
- IPv6 static routing configuration examples
- Configuring an IPv6 default route
- Configuring RIPng
- Configuring OSPFv3
- Overview
- OSPFv3 configuration task list
- Enabling OSPFv3
- Configuring OSPFv3 area parameters
- Configuring OSPFv3 network types
- Configuring OSPFv3 route control
- Configuration prerequisites
- Configuring OSPFv3 route summarization
- Configuring OSPFv3 received route filtering
- Configuring Inter-Area-Prefix LSA filtering
- Configuring an OSPFv3 cost for an interface
- Configuring the maximum number of OSPFv3 ECMP routes
- Configuring a preference for OSPFv3
- Configuring OSPFv3 route redistribution
- Tuning and optimizing OSPFv3 networks
- Configuration prerequisites
- Configuring OSPFv3 timers
- Specifying LSA transmission delay
- Specifying SPF calculation interval
- Specifying the LSA generation interval
- Configuring a DR priority for an interface
- Ignoring MTU check for DD packets
- Disabling interfaces from receiving and sending OSPFv3 packets
- Enabling the logging of neighbor state changes
- Configuring OSPFv3 network management
- Configuring the LSU transmit rate
- Configuring stub routers
- Configuring prefix suppression
- Configuring OSPFv3 GR
- Configuring OSPFv3 NSR
- Configuring BFD for OSPFv3
- Applying an IPsec profile
- Displaying and maintaining OSPFv3
- OSPFv3 configuration examples
- OSPFv3 stub area configuration example
- OSPFv3 NSSA area configuration example
- OSPFv3 DR election configuration example
- OSPFv3 route redistribution configuration example
- OSPFv3 route summarization configuration example
- OSPFv3 GR configuration example
- OSPFv3 NSR configuration example
- BFD for OSPFv3 configuration example
- OSPFv3 IPsec profile configuration example
- Configuring IPv6 IS-IS
- Configuring IPv6 PBR
- Configuring routing policies
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 63 |
| Size: | 2.27 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Preparing for installation
- Installing the switch
- Setting up an IRF fabric
- Accessing the switch for the first time
- Maintenance and troubleshooting
- Appendix A Chassis views and technical specifications
- Appendix B Ports and LEDs
- Appendix C FRUs and compatibility matrixes
- Appendix D Lightning protection of the switch
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 21 |
| Size: | 287 KB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Configuring OpenFlow
- Overview
- OpenFlow configuration task list
- Configuring OpenFlow instances
- Configuration restrictions and guidelines
- Creating an OpenFlow instance
- Associating an OpenFlow instance with VLANs
- Configuring flow table IDs
- Setting the connection mode for an OpenFlow instance to establish connections to controllers
- Configuring the maximum number of flow entries
- Configuring in-band management VLANs
- Disabling MAC address learning in the VLANs associated with an OpenFlow instance
- Configuring the datapath ID for an OpenFlow instance
- Activating or reactivating an OpenFlow instance
- Configuring controllers for an OpenFlow switch
- Setting OpenFlow timers
- Configuring OpenFlow to support dynamic MAC addresses
- Displaying and maintaining OpenFlow
- OpenFlow configuration example
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 74 |
| Size: | 1.96 MB |
Show table of contents
Read manual
Document Outline
- Title page
- Preface
- 01-Text
- Product overview
- Preparing for installation
- Installing the switch
- Initial power-on
- Loading software
- Introduction
- Approaches for loading boot files and configuration files
- Loading files through the Boot ROM menu
- Loading files at the CLI
- Maintenance and troubleshooting
- Appendix A Lightning Protection of the Switch
| Recognized languages: | English |
|---|---|
| Pages: | 745 |
| Size: | 7.31 MB |
Show table of contents
Read manual
Document Outline
- Cover
- Preface
- 01-CLI Configuration
- 1 CLI Configuration
- What Is CLI?
- Entering the CLI
- H3C Products CLI Descriptions
- Tips on Using the CLI
- 1 CLI Configuration
- 02-Login Configuration
- 1 Logging In to an Ethernet Switch
- 2 Logging In Through the Console Port
- Introduction
- Setting Up the Connection to the Console Port
- Console Port Login Configuration
- Console Port Login Configuration with Authentication Mode Being None
- Console Port Login Configuration with Authentication Mode Being Password
- Console Port Login Configuration with Authentication Mode Being Scheme
- 3 Logging In Through Telnet/SSH
- 4 Logging in Through Web-based Network Management System
- 5 Logging In Through NMS
- 6 Specifying Source for Telnet Packets
- 7 Controlling Login Users
- 03-Ethernet Port Configuration
- 1 Ethernet Port Configuration
- Basic Ethernet Port Configuration
- Configuring an Auto-negotiation Transmission Rate
- Configuring Flow Control on an Ethernet Port
- Perfoming Loopback Testing on an Ethernet Port
- Enabling Auto Power Down on an Ethernet Port
- Configuring a Port Group
- Configuring Traffic Storm Protection
- Setting the Interval for Collecting Ethernet Port Statistics
- Enabling Forwarding of Jumbo Frames
- Enabling Loopback Detection on an Ethernet Port
- Configuring the MDI Mode for an Ethernet Port
- Enabling Bridging on an Ethernet Port
- Testing the Cable on an Ethernet Port
- Displaying and Maintaining an Ethernet Port
- 1 Ethernet Port Configuration
- 04-Loopback Interface and Null Interface Configuration
- 05-Ethernet Link Aggregation Configuration
- 1 Ethernet Link Aggregation Configuration
- Overview
- Ethernet Link Aggregation Configuration Task List
- Configuring an Aggregation Group
- Configuring an Aggregate Interface
- Displaying and Maintaining Ethernet Link Aggregation
- Ethernet Link Aggregation Configuration Examples
- 1 Ethernet Link Aggregation Configuration
- 06-Port Isolation Configuration
- 07-Port Mirroring Configuration
- 08-LLDP Configuration
- 09-VLAN Configuration
- 1 VLAN Configuration
- 2 Voice VLAN Configuration
- 10-MSTP Configuration
- 1 MSTP Configuration
- Overview
- Introduction to STP
- Introduction to RSTP
- Introduction to MSTP
- MSTP Configuration Task List
- Configuring MSTP
- Configuring an MST Region
- Configuring the Root Bridge or a Secondary Root Bridge
- Configuring the Work Mode of an MSTP Device
- Configuring the Priority of a Device
- Configuring the Maximum Hops of an MST Region
- Configuring the Network Diameter of a Switched Network
- Configuring Timers of MSTP
- Configuring the Timeout Factor
- Configuring the Maximum Port Rate
- Configuring Ports as Edge Ports
- Configuring Path Costs of Ports
- Configuring Port Priority
- Configuring the Link Type of Ports
- Configuring the Mode a Port Uses to Recognize/Send MSTP Packets
- Enabling the Output of Port State Transition Information
- Enabling the MSTP Feature
- Performing mCheck
- Configuring the VLAN Ignore Feature
- Displaying and Maintaining MSTP
- MSTP Configuration Example
- 1 MSTP Configuration
- 11-IP Addressing Configuration
- 12-IP Performance Optimization Configuration
- 13-ARP Configuration
- 1 ARP Configuration
- 2 ARP Attack Defense Configuration
- Configuring ARP Active Acknowledgement
- Configuring Source MAC Address Based ARP Attack Detection
- Configuring ARP Packet Rate Limit
- Configuring ARP Detection
- Introduction to ARP Detection
- Enabling ARP Detection Based on DHCP Snooping Entries/802.1X Security Entries/Static IP-to-MAC Bindings
- Configuring ARP Detection Based on Specified Objects
- Displaying and Maintaining ARP Detection
- ARP Detection Configuration Example I
- ARP Detection Configuration Example II
- Configuring Periodic Sending of Gratuitous ARP Packets
- 14-DHCP Configuration
- 1 DHCP Relay Agent Configuration
- Introduction to DHCP Relay Agent
- DHCP Relay Agent Configuration Task List
- Configuring the DHCP Relay Agent
- Displaying and Maintaining DHCP Relay Agent Configuration
- DHCP Relay Agent Configuration Examples
- Troubleshooting DHCP Relay Agent Configuration
- 2 DHCP Client Configuration
- 3 DHCP Snooping Configuration
- 4 BOOTP Client Configuration
- 1 DHCP Relay Agent Configuration
- 15-FTP and TFTP Configuration
- 1 FTP Configuration
- FTP Overview
- Configuring the FTP Client
- Configuring the FTP Server
- Displaying and Maintaining FTP
- 2 TFTP Configuration
- 1 FTP Configuration
- 16-IP Routing Basics Configuration
- 17-Static Routing Configuration
- 18-Mulitcast Configuration
- 1 Multicast Overview
- 2 IGMP Snooping Configuration
- IGMP Snooping Overview
- IGMP Snooping Configuration Task List
- Configuring Basic Functions of IGMP Snooping
- Configuring IGMP Snooping Port Functions
- Configuring IGMP Snooping Querier
- Configuring IGMP Snooping Proxying
- Configuring an IGMP Snooping Policy
- Configuration Prerequisites
- Configuring a Multicast Group Filter
- Configuring the Function of Dropping Unknown Multicast Data
- Configuring IGMP Report Suppression
- Configuring Maximum Multicast Groups that Can Be Joined on a Port
- Configuring Multicast Group Replacement
- Configuring 802.1p Precedence for IGMP Messages
- Displaying and Maintaining IGMP Snooping
- IGMP Snooping Configuration Examples
- Troubleshooting IGMP Snooping Configuration
- 3 Multicast VLAN Configuration
- 19-QoS Configuration
- 1 QoS Overview
- 2 QoS Policy Configuration
- 3 Priority Mapping Configuration
- 4 Line Rate Configuration
- 5 Congestion Management Configuration
- 6 Traffic Filtering Configuration
- 7 Traffic Redirecting Configuration
- 8 Appendix
- 20-802.1X Configuration
- 1 802.1X Configuration
- 802.1X Overview
- 802.1X Configuration Task List
- 802.1X Basic Configuration
- Enabling the Online User Handshake Function
- Enabling the Multicast Trigger Function
- Specifying a Mandatory Authentication Domain for a Port
- Enabling the Quiet Timer
- Enabling the Re-Authentication Function
- Configuring a Guest VLAN
- Configuring an Auth-Fail VLAN
- Displaying and Maintaining 802.1X
- 802.1X Configuration Example
- Guest VLAN and VLAN Assignment Configuration Example
- ACL Assignment Configuration Example
- 1 802.1X Configuration
- 21-AAA Configuration
- 1 AAA Configuration
- Introduction to AAA
- Introduction to RADIUS
- Protocols and Standards
- AAA Configuration Task List
- Configuring AAA
- Configuration Prerequisites
- Creating an ISP Domain
- Configuring ISP Domain Attributes
- Configuring AAA Authentication Methods for an ISP Domain
- Configuring AAA Authorization Methods for an ISP Domain
- Configuring AAA Accounting Methods for an ISP Domain
- Configuring Local User Attributes
- Configuring User Group Attributes
- Tearing down User Connections Forcibly
- Configuring a NAS ID-VLAN Binding
- Displaying and Maintaining AAA
- Configuring RADIUS
- Creating a RADIUS Scheme
- Specifying the RADIUS Authentication/Authorization Servers
- Specifying the RADIUS Accounting Servers and Relevant Parameters
- Setting the Shared Key for RADIUS Packets
- Setting the Upper Limit of RADIUS Request Retransmission Attempts
- Setting the Supported RADIUS Server Type
- Setting the Status of RADIUS Servers
- Configuring Attributes Related to Data to Be Sent to the RADIUS Server
- Enabling the RADIUS Trap Function
- Specifying the Source IP Address for RADIUS Packets to Be Sent
- Setting Timers Regarding RADIUS Servers
- Configuring RADIUS Accounting-On
- Enabling the Listening Port of the RADIUS Client
- Displaying and Maintaining RADIUS
- AAA Configuration Examples
- Troubleshooting AAA
- 1 AAA Configuration
- 22-PKI Configuration
- 1 PKI Configuration
- Introduction to PKI
- PKI Configuration Task List
- Configuring an Entity DN
- Configuring a PKI Domain
- Submitting a PKI Certificate Request
- Retrieving a Certificate Manually
- Configuring PKI Certificate Verification
- Destroying a Local RSA Key Pair
- Deleting a Certificate
- Configuring an Access Control Policy
- Displaying and Maintaining PKI
- PKI Configuration Examples
- Troubleshooting PKI
- 1 PKI Configuration
- 23-SSL Configuration
- 24-SSH2.0 Configuration
- 1 SSH2.0 Configuration
- SSH2.0 Overview
- Configuring the Device as an SSH Server
- Configuring the Device as an SSH Client
- Displaying and Maintaining SSH
- SSH Server Configuration Examples
- SSH Client Configuration Examples
- 2 SFTP Service
- 1 SSH2.0 Configuration
- 25-Public Key Configuration
- 26-HABP Configuration
- 27-ACL Configuration
- 28-Device Management Configuration
- 1 Device Management
- Device Management Overview
- Device Management Configuration Task List
- Configuring the Exception Handling Method
- Rebooting a Device
- Configuring the Scheduled Automatic Execution Function
- Upgrading Device Software
- Clearing the 16-bit Interface Indexes Not Used in the Current System
- Identifying and Diagnosing Pluggable Transceivers
- Displaying and Maintaining Device Management Configuration
- Device Management Configuration Examples
- 1 Device Management
- 29-NTP Configuration
- 1 NTP Configuration
- NTP Overview
- NTP Configuration Task List
- Configuring the Operation Modes of NTP
- Configuring Optional Parameters of NTP
- Configuring Access-Control Rights
- Configuring NTP Authentication
- Displaying and Maintaining NTP
- NTP Configuration Examples
- 1 NTP Configuration
- 30-SNMP Configuration
- 31-RMON Configuration
- 32-File System Management Configuration
- 1 File System Management
- 2 Configuration File Management
- Configuration File Overview
- Saving the Current Configuration
- Setting Configuration Rollback
- Specifying a Startup Configuration File for the Next System Startup
- Backing Up the Startup Configuration File
- Deleting the Startup Configuration File for the Next Startup
- Restoring the Startup Configuration File
- Displaying and Maintaining Device Configuration
- 33-System Maintaining and Debugging Configuration
- 34-Basic System Configuration
- 1 Basic Configurations
- Configuration Display
- Configuring the Device Name
- Configuring the System Clock
- Enabling/Disabling the Display of Copyright Information
- Configuring a Banner
- Configuring CLI Hotkeys
- Configuring User Privilege Levels and Command Levels
- Displaying and Maintaining Basic Configurations
- 1 Basic Configurations
- 35-Information Center Configuration
- 1 Information Center Configuration
- Information Center Overview
- Configuring Information Center
- Information Center Configuration Task List
- Outputting System Information to the Console
- Outputting System Information to a Monitor Terminal
- Outputting System Information to a Log Host
- Outputting System Information to the Trap Buffer
- Outputting System Information to the Log Buffer
- Outputting System Information to the SNMP Module
- Outputting System Information to the Web Interface
- Saving System Information to a Log File
- Configuring Synchronous Information Output
- Disabling a Port from Generating Link Up/Down Logging Information
- Displaying and Maintaining Information Center
- Information Center Configuration Examples
- 1 Information Center Configuration
- 36-MAC Address Table Configuration
- 37-Cluster Management Configuration
- 1 Cluster Management Configuration
- Cluster Management Overview
- Cluster Configuration Task List
- Configuring the Management Device
- Enabling NDP Globally and for Specific Ports
- Configuring NDP Parameters
- Enabling NTDP Globally and for Specific Ports
- Configuring NTDP Parameters
- Manually Collecting Topology Information
- Enabling the Cluster Function
- Establishing a Cluster
- Enabling Management VLAN Auto-Negotiation
- Configuring Communication Between the Management Device and the Member Devices Within a Cluster
- Configuring Cluster Management Protocol Packets
- Cluster Member Management
- Configuring the Member Devices
- Configuring Access Between the Management Device and Its Member Devices
- Adding a Candidate Device to a Cluster
- Configuring Advanced Cluster Functions
- Displaying and Maintaining Cluster Management
- Cluster Management Configuration Example
- 1 Cluster Management Configuration
- 38-HTTP Configuration
- 1 HTTP Configuration
- 2 HTTPS Configuration
- HTTPS Overview
- HTTPS Configuration Task List
- Associating the HTTPS Service with an SSL Server Policy
- Enabling the HTTPS Service
- Associating the HTTPS Service with a Certificate Attribute Access Control Policy
- Configuring the Port Number of the HTTPS Service
- Associating the HTTPS Service with an ACL
- Displaying and Maintaining HTTPS
- HTTPS Configuration Example
- 39-Stack Management Configuration
- 40-PoE Configuration
- 1 PoE Configuration
- PoE Overview
- PoE Configuration Task List
- Enabling PoE
- Detecting PDs
- Configuring the PoE Power
- Configuring PoE Power Management
- Configuring the PoE Monitoring Function
- Configuring PoE Interface through PoE Profile
- Upgrading PSE Processing Software in Service
- Displaying and Maintaining PoE
- PoE Configuration Example
- Troubleshooting PoE
- 1 PoE Configuration
- 41-IP Source Guard Configuration
- 42-Appendix
| Recognized languages: | English |
|---|---|
| Pages: | 306 |
| Size: | 3.23 MB |
Show table of contents
Read manual
Document Outline
- Title Page
- Preface
- Contents
- Using ping, tracert, and system debugging
- Configuring NTP
- Overview
- Configuration restrictions and guidelines
- Configuration task list
- Enabling the NTP service
- Configuring NTP association modes
- Configuring access control rights
- Configuring NTP authentication
- Configuring NTP optional parameters
- Configuring the local clock as a reference source
- Displaying and maintaining NTP
- NTP client/server mode configuration example
- IPv6 NTP client/server mode configuration example
- NTP symmetric active/passive mode configuration example
- IPv6 NTP symmetric active/passive mode configuration example
- NTP broadcast mode configuration example
- NTP multicast mode configuration example
- IPv6 NTP multicast mode configuration example
- Configuration example for NTP client/server mode with authentication
- Configuration example for NTP broadcast mode with authentication
- Configuring SNTP
- Configuring PTP
- Overview
- Configuring clock nodes
- Configuration task list
- Specifying a PTP standard
- Specifying the clock node type
- Specifying a PTP domain
- Configuring an OC to operate as only a member clock
- Configuring the role of a PTP port
- Configuring the mode for carrying timestamps
- Specifying a delay measurement mechanism for a BC or OC
- Configuring the port type for a TC+OC
- Configuring the interval for sending announce messages
- Specifying the number of announcement intervals before the receiving node stops receiving announce messages
- Configuring the interval for sending Pdelay_Req messages
- Configuring the interval for sending Sync messages
- Configuring the minimum interval for sending Delay_Req messages
- Configuring the MAC address for non-pdelay messages
- Specifying the protocol for encapsulating PTP messages as UDP (IPv4)
- Specifying the source IP address for UDP packets
- Configuring the delay correction value
- Configuring the cumulative offset between the UTC and TAI
- Configuring the correction date of the UTC
- Configuring the parameters of the Bits clock
- Configuring a priority of the clock
- Specifying the system time source as PTP
- Enabling PTP on a port
- Displaying and maintaining PTP
- PTP configuration example (IEEE 1588 Version 2)
- PTP configuration example (IEEE 802.1AS)
- Configuring the information center
- Overview
- FIPS compliance
- Information center configuration task list
- Outputting logs to the console
- Outputting logs to the monitor terminal
- Outputting logs to a log host
- Outputting logs to the log buffer
- Saving logs to the log file
- Managing security logs
- Saving diagnostic logs to the diagnostic log file
- Configuring the maximum size of the trace log file
- Enabling synchronous information output
- Enabling duplicate log suppression
- Disabling an interface from generating link up or link down logs
- Displaying and maintaining information center
- Configuration example for outputting logs to the console
- Configuration example for outputting logs to a UNIX log host
- Configuration example for outputting logs to a Linux log host
- Configuring SNMP
- Configuring RMON
- Configuring NQA
- Overview
- NQA configuration task list
- Configuring the NQA server
- Enabling the NQA client
- Configuring NQA operations on the NQA client
- NQA operation configuration task list
- Configuring the ICMP echo operation
- Configuring the DHCP operation
- Configuring the DNS operation
- Configuring the FTP operation
- Configuring the HTTP operation
- Configuring the UDP jitter operation
- Configuring the SNMP operation
- Configuring the TCP operation
- Configuring the UDP echo operation
- Configuring the voice operation
- Configuring the DLSw operation
- Configuring the path jitter operation
- Configuring optional parameters for the NQA operation
- Configuring the collaboration function
- Configuring threshold monitoring
- Configuring the NQA statistics collection function
- Configuring the saving of NQA history records
- Scheduling the NQA operation on the NQA client
- Configuring NQA templates on the NQA client
- Displaying and maintaining NQA
- NQA configuration examples
- ICMP echo operation configuration example
- DHCP operation configuration example
- DNS operation configuration example
- FTP operation configuration example
- HTTP operation configuration example
- UDP jitter operation configuration example
- SNMP operation configuration example
- TCP operation configuration example
- UDP echo operation configuration example
- Voice operation configuration example
- DLSw operation configuration example
- Path jitter operation configuration example
- NQA collaboration configuration example
- ICMP template configuration example
- DNS template configuration example
- TCP template configuration example
- HTTP template configuration example
- FTP template configuration example
- Configuring port mirroring
- Overview
- Configuring local port mirroring
- Configuring Layer 2 remote port mirroring
- Configuring a remote destination group on the destination device
- Configuring a remote source group on the source device
- Displaying and maintaining port mirroring
- Port mirroring configuration examples
- Configuring flow mirroring
- Configuring sFlow
- Monitoring and maintaining processes
- Configuring EAA
- Configuring CWMP
- Overview
- Configuration task list
- Enabling CWMP from the CLI
- Configuring ACS attributes
- Configuring CPE attributes
- Displaying and maintaining CWMP
- CWMP configuration example
- Configuring NETCONF
- Overview
- FIPS compliance
- NETCONF configuration task list
- Enabling NETCONF over SOAP
- Enabling NETCONF over SSH
- Establishing a NETCONF session
- Subscribing to event notifications
- Locking/unlocking the configuration
- Performing service operations
- Performing the get/get-bulk operation
- Performing the get-config/get-bulk-config operation
- Performing the edit-config operation
- All-module configuration data retrieval example
- Syslog configuration data retrieval example
- Example for retrieving a data entry for the interface table
- Example for changing the value of a parameter
- Saving, rolling back, and loading the configuration
- Filtering data
- Performing CLI operations through NETCONF
- Retrieving NETCONF session information
- Terminating another NETCONF session
- Returning to the CLI
- Appendix
- Index