Document Outline

• Front cover
• Contents
• Notices
  • Conventions used in this book
    • Symbols
    • Highlighting
  • Safety information
    • 1. Turn off the computer and any external devices (such as a monitor or printer) that have their ...
    • 2. Attach a signal cable to each external device (such as a monitor or printer), and then connect...
    • 3. Attach communication cables (such as modem cables or network cables) to the computer. Then, at...
    • 4. Attach the power cords to the computer and any external devices (such as a monitor or printer)...
    • 5. Turn on the computer and any attached devices that have their own power switches.
    • 1. Turn off the computer and any attached devices that have their own power switches.
    • 2. Unplug all power cables from electrical outlets.
    • 3. Disconnect all communication cables (such as modem or network cables) from communication outlets.
    • 4. Disconnect all cables and cords from the computer; this includes power cords, signal cables fr...
    • Modem safety information
    • Laser compliance statement
    • Consignes de sécurité
      • 1. Mettez l'ordinateur hors tension ainsi que tout périphérique (écran ou imprimante) que vous al...
      • 2. Connectez tous les câbles (de l'écran, par exemple) à l'ordinateur.
      • 3. Branchez tous les câbles d'interface (par exemple, un câble téléphonique) sur des socles de pr...
      • 4. Branchez les cordons d'alimentation sur des socles de prise de courant correctement mis à la t...
      • 5. Mettez l’ordinateur sous tension ainsi que tout périphérique connecté disposant d’un interrupt...
      • 1. Mettez l'ordinateur hors tension ainsi que tout périphérique connecté disposant d'un interrupt...
      • 2. Débranchez tous les cordons d'alimentation des prises de courant.
      • 3. Débranchez tous les câbles (câble de téléphone, par exemple) de leurs prises.
      • 4. Débranchez tous câbles de l’ordinateur (les cordons d’alimentation, les câbles d’entrée-sortie...
      • Consignes de sécurité relatives au modem
      • Consignes relatives à la pile au lithium
      • Consignes de sécurité pour l’unité de CD-ROM et de DVD-ROM
  • Regulatory notices
    • 1. The modem adapter card is located in the back of the system unit. It complies with Part 68 of ...
    • 2. The REN is useful to determine the quantity of devices you may connect to your telephone line ...
    • 3. If the built-in modem causes harm to the telephone network, the telephone company may disconti...
    • 4. Your telephone company may make changes in its facilities, equipment, operations, or procedure...
    • 5. If you experience trouble with this built-in modem, contact your Authorized Seller, or the IBM...
    • 6. No customer repairs are possible to the modem.
    • 7. The modem may not be used on coin service provided by the telephone company. Connection to par...
    • 8. When ordering network interface (NI) service from the Local Exchange Carrier, specify service ...
    • North American Federal Communications Commission (FCC) Statement
  • Year 2000 Notice Information
    • The software products listed above are applicable to a variety of IBM computer products, and not ...
  • Ergonomics
    • Arranging your work area
    • Choosing a chair
      • Positioning the monitor
      • Positioning the keyboard
• Part 1. Learning about this book
  • Chapter 1. Using this book
    • How this book is organized
    • Where to find more information
• Part 2. Support information
  • Chapter 2. HelpWare support and services
    • What do I do first?
      • What is IBM HelpWare?
      • Need quick help?
      • What can I do on my own?
      • Printed documentation
      • Online documentation
      • Software
    • How do I get help electronically?
    • How and when do I contact the IBM PC HelpCenter?
      • What help can I get by telephone?
      • 30-day "Up and Running" support
      • Software technical support
      • Additional support
      • Hardware warranty service
      • Before you call...
    • How and when do I purchase additional support?
      • Purchasing additional HelpWare services
      • You can purchase support in the following ways
      • To order additional support packages
  • Chapter 3. Express Maintenance
• Part 3. Controlling system settings
  • Chapter 4. Getting started
    • Controlling monitor settings
      • Getting the best performance from your monitor
      • Power saver feature
      • Changing display settings
      • Customizing display properties
      • Tips for choosing display properties
      • Using the Windows Help function to select display properties
    • Controlling volume
      • Adjusting the speaker volume
      • Adjusting the headphone volume
    • Getting ready to print
    • Setting up communications
      • Connecting your modem to the telephone network
      • Configuring your communications software
    • Configuring your computer for a connection to the Internet
      • The IBM Internet Connection Services
      • The Microsoft Network
      • The Internet Connection Wizard
      • Using the Rapid Access II keyboard
  • Chapter 5. Power management features
    • Software shutdown
    • System Standby
    • Using the Power Management feature in Windows 98
    • Monitor standby
  • Chapter 6. BIOS Setup configuration
    • Configuration/Setup Utility overview
    • Entering Setup
      • When the computer is on
      • When the computer is off
    • Working with the Setup menus
      • Configuration/Setup Utility menu
      • Viewing system information and product data
      • Changing parameter settings
      • Loading the default settings
      • Canceling changes
      • Exiting Setup
    • Setup parameters
      • Devices and I/O Ports
      • Start Options
      • Advanced Setup
      • Power Management Setup
    • Using other configuration utilities
• Part 4. Upgrading and replacing hardware
  • Chapter 7. Preparing to upgrade
    • Evaluating your new hardware
    • Planning your hardware changes
    • Resolving resource conflicts
      • Using Setup
      • Using the Windows 98 Device Manager
    • Opening the system unit
      • Taking safety precautions
      • Removing the top cover
    • Looking inside the system unit
  • Chapter 8. Adding and removing adapter cards and drives
    • Resolving conflicts with installed adapter cards
    • Working with the hardware in the system unit
    • Adding and removing adapter cards
    • Removing and adding drives
      • Guidelines for connecting IDE/ATA signal cables
      • Guidelines for connecting diskette interface signal cables
      • Removing the diskette drive
      • Removing the CD-ROM drive
      • Removing the hard disk drive
      • Installing a drive in Bay 2
    • Updating the CMOS settings in Setup
  • Chapter 9. Adding and replacing system board components
    • Identifying system board parts (machine type 2193)
    • Locating system board jumpers and connectors (machine type 2193)
    • Identifying system board parts (machine type 2194 and 6345)
    • Locating system board jumpers and connectors (machine type 2194 or 6345)
    • Card connector and jumper information
      • Identifying adapter card connectors
      • Setting a jumper
    • Upgrading the system memory
    • Replacing the system battery
    • Updating the CMOS settings in Setup
• Part 5. Troubleshooting
  • Chapter 10. Diagnosing and recovering from problems
    • Before you panic: some simple fixes
      • Step 1 Are the power indicator lights on the system unit and monitor lit?
      • Step 2 Did the system unit beep after it was turned on?
      • Step 3 Is anything displayed on the monitor?
    • Quick problem solving chart
    • Solving hardware and software problems
      • Solving hardware problems
      • Solving software problems
      • Solving modem problems
    • Error codes and messages
    • IBM Diagnostic Programs
      • Starting PC-Doctor for Windows
      • Starting the IBM Enhanced Diagnostics program
      • Reinstalling device drivers
    • Recovering factory-installed programs and files
• Part 6. Technical reference
  • Appendix A. Specification tables
    • Memory module placement
    • Memory map
    • System input/output addresses
    • System interrupts
    • DMA channel assignments
    • Serial port addresses
    • Connector functions
  • Appendix B. Modem information
    • Modem features
    • Operating your modem
    • Modem commands
      • AT commands
      • Detail for +MS Controls
      • Extended AT commands
      • V.42bis commands
      • Modem response codes
      • S registers
  • Appendix C. Monitor terminology
  • Appendix D. Warranty
    • Warranty statements
    • IBM Statement of Limited Warranty for United States, Puerto Rico, and Canada (Part 1 - General Te...
      • The IBM warranty for Machines
      • Extent of warranty
      • Items not covered by warranty
      • Warranty service
        • 1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exch...
        • 2. obtain authorization from the owner to have IBM or your reseller service a Machine that you do...
        • 3. where applicable, before service is provided
          • a. follow the problem determination, problem analysis, and service request procedures that IBM or...
          • b. secure all programs, data, and funds contained in a Machine
          • c. provide IBM or your reseller with sufficient, free, and safe access to your facilities to perm...
          • d. inform IBM or your reseller of changes in a Machine’s location.
      • Production status
      • Limitation of liability
        • 1. damages for bodily injury (including death) and damage to real property and tangible personal ...
        • 2. the amount of any other actual direct damages, up to the greater of U.S. $100,000 (or equivale...
    • IBM Statement of Warranty Worldwide except Canada, Puerto Rico, Turkey, United States (Part 1- Ge...
      • The IBM warranty for Machines
      • Extent of warranty
      • Items not covered by warranty
      • Warranty service
        • 1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exch...
        • 2. obtain authorization from the owner to have IBM or your reseller service a Machine that you do...
        • 3. where applicable, before service is provided
          • b. secure all programs, data, and funds contained in a Machine
          • c. provide IBM or your reseller with sufficient, free, and safe access to your facilities to perm...
          • d. inform IBM or your reseller of changes in a Machine’s location.
      • Production status
      • Limitation of liability
        • 1. damages for bodily injury (including death) and damage to real property and tangible personal ...
        • 2. the amount of any other actual direct damages, up to the greater of U.S. $100,000 (or equivale...
    • Part 2 - Country-Unique Terms
      • ASIA PACIFIC
        • AUSTRALIA: The IBM warranty for Machines
        • Extent of warranty
        • Limitation of liability
        • PEOPLE’S REPUBLIC OF CHINA: Governing Law
        • INDIA: Limitation of liability
          • 1. liability for bodily injury (including death) or damage to real property and tangible personal...
          • 2. as to any other actual damage arising in any situation involving nonperformance by IBM pursuan...
        • NEW ZEALAND: The IBM warranty for Machines
        • Limitation of liability.
      • EUROPE, MIDDLE EAST, AFRICA (EMEA)
        • The following terms apply to all EMEA countries
        • Warranty service
      • The following terms apply to the country specified:
        • EGYPT: Limitation of liability.
        • FRANCE: Limitation of liability.
        • GERMANY: The IBM warranty for Machines.
        • Extent of warranty
        • Production status.
        • Limitation of liability.
        • IRELAND: Extent of warranty.
        • Limitation of liability.
          • 1. death or personal injury or physical damage to your real property solely caused by IBM's negli...
          • 2. the amount of any other actual direct damages, up to the greater of Irish Pounds 75,000 or 125...
        • ITALY: Limitation of liability.
        • SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND: Limitation of liability.
        • TURKIYE: Production status
        • UNITED KINGDOM: Limitation of liability.
          • 1. death or personal injury or physical damage to your real property solely caused by IBM's negli...
          • 2. the amount of any other actual direct damages or loss, up to the greater of Pounds Sterling 15...
          • 3. breach of IBM's obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 o...
      • NORTH AMERICA
        • CANADA: Warranty service.
        • UNITED STATES OF AMERICA: Warranty service
• Index