Humax VA-FOX T - Manual (Page 17)

**
This chapter describes functions such as switching channel, volume control, and basic features for
watching programmes.
4.1 Switching Channel
You can switch the current channel using one of the following methods.
1. Press the CH-/CH+ button.
2. Enter your desired channel numeric using the NUMERICAL (0-9) buttons to move to the
channel directly.
3. Press the TV/RADIO button to switch between TV channel and Radio channel.
Note: You can switch channel using Programme Guide or Channel List. Please refer to Chapter 5
and 6 for more information.
4.2 Volume Control
1. Press the V-/V+ buttons to adjust the audio volume of your TV/DTV.
2. Press the MUTE button to stop the sound of your TV/DTV temporarily.
Note: You can adjust the Volume Control in the TV when you are setting TV code. Refer to
chapter 12 to set the TV.
4.3 Motion Still
Press the FREEZE button at remote control to pause the current programme. Press the
FREEZE button again to continue the programme.
4.4 Teletext
When the channel supports teletext, the Teletext icon ( ) is displayed on the I-plate.
It’s possible to adjust in the channel supported teletext mode. Press the TEXT button to change
to the teletext mode.
1. Press the MENU button to display teletext menu.
2. Select your desired teletext fuction using the button.
3. Press the OK button.
**
4. Basic Operation
GB 16
**
**
**
**
**
**
**
**
**
**
**
**
**
**