Hoover S1211 - Manual (Page 23)

Lubrication
The motor is equipped with one ball bearing and one sleeve bearing.
These bearings contain sufficient lubrication for the life of the motor. The
addition of lubricant could cause damage. Therefore, do not add lubri-
cant to either motor bearing.
The agitator is equipped with two ball bearings that should be lubricated
periodically. This should be done by a Hoover Factory Service Center or
an Authorized Hoover Warranty Service Dealer.
Energy saving tips
1. Empty dust cup before it’s over-filled.
2. To maintain effective cleaning, replace agitator brushes and belt when
necessary.
3. Turn off cleaner when not in use, such as when moving furniture.
4. Keep your cleaner operating at peak performance level have inspec-
tion and service performed by a Hoover Factory Service Center or Au-
thorized Hoover Warranty Service Dealer.
22