Honeywell Q7055A User Manual

Q7055a, Honeywell, Quick setup

Advertising
background image

Honeywell

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

Q7055A

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN

INSTALLATION INSTRUCTION & USER MANUAL

Quick Setup

In order to setup the BNA device properly,
the following connections are prerequisite:
Null-Modem cable connected to a PC

running a VT100 terminal emulation

program or a VT100 compatible terminal
(refer to Table 6-1: Terminal settings)

LAN connection either via UTP (RJ45

connector) or AUI.

Power connection.

An active FTP-Server machine on the LAN
The following BNA Bootloader commands
are mandatory for setting up the BNA (for a
detailed command description, refer to
chapter 6.5 Command Description on Page
31
):

np

Basic network parameters

dc

Download configuration

load

Load executable from FTP server

Before the application firmware is started it
is recommended to add some users (user
roles) using command um (refer to chapter
6.5.8 um - User management on Page 37).

After that the BNA device can be installed
at its final operating location.

Advertising