HP 2490 User Manual
Page 3
PDA Wireless Patch Instructions - Windows Mobility 5.0
Steps
Screen Displayed
Procedures
3
PDA OUT OF CRADLE
STEP #2: Performing a HARD reset on
the PDA and Initial Setup after reset.
• Remove the PDA from the cradle
• Hold down the Power, Message,
and Calendar buttons at the same
time.
• While holding down the three
buttons, Press the Stylus Pen into
the small hole on the bottom left
side and Hold until you see the
screen go black,
• Release the buttons and remove
the stylus
Note: After screen begins to rest, you
should see a message at the bottom of the
screen: “Formatting PS……”. If
message does not appear, retry the Hard
Reset procedure again.
4
Performing initial setup items.
Before putting the PDA back into the
cradle, the initial setup must be
completed.
• Follow the onscreen prompts
• When completed, place the PDA
in the Cradle
PDA IN CRADLE
Welcome Screen Appears.
• Click Next button
• Uncheck Synchronize box
• Click Next button
Created by Polk County Schools
Help Desk 519-8042 or 51586
Updated: 07/24/08
3