Home Automation II - Manual (Page 73)

Page 65
To turn HC 1 All On feature On, press 1 then ' # '. To turn HC 1 All On feature Off, press the 0 key, then ' # '.
The default setting for HC 1 X-10 All On is Yes.
House Codes 2-16 X-10 All Off
This feature allows you to choose if House Codes 2-16 will respond to the X-10 All Off commands. House Codes 3, 5, and 7,
will determine if ALC Module 1 Branches 2, 3, 4, respectively will respond to All Off commands and House Codes 9, 11, 13, and
15 will determine if ALC Module 2 Branches 1, 2, 3, and 4, respectively will respond to All Off commands.
HC 2 X-10 ALL OFF: 1
0=NO 1=YES ↕
To turn HC 2-16 All Off feature On, press 1 then ' # '. To turn HC 2-16 All Off feature Off, press the 0 key, then ' # '.
The default setting for HC 2-16 X-10 All Off is Yes.
House Codes 2-16 X-10 All On
This feature allows you to choose if House Codes 2-16 will respond to the X-10 All On commands. House Codes 3, 5, and 7, will
determine if ALC Module 1 Branches 2, 3, 4, respectively will respond to All On commands and House Codes 9, 11, 13, and 15
will determine if ALC Module 2 Branches 1, 2, 3, and 4, respectively will respond to All On commands.
HC 2 X-10 ALL ON: 1
0=NO 1=YES ↕
To turn HC 2-16 All On feature On, press 1 then ' # '. To turn HC 2-16 All On feature Off, press the 0 key, then ' # '.
The default setting for HC 2-16 X-10 All On is Yes.
Time Clocks
There are three Time Clocks in the system are used to conditionalize programs. They are used solely to define time periods during
the week when certain programs should be enabled or disabled to execute.
TIME CLOCK 1 ON
TIME CLOCK 1 OFF
Specify the on and off times for each Time Clock - See Set Up Codes.
TIME CLOCK 1 ON TIME:
12:00 AM MTWTFSS #=CHNG ↕
TIME CLOCK 1 OFF TIME
-- NEVER #=CHNG ↕
For example, it may be desirable to conditionalize certain programs to execute only during a normal Monday - Friday 9:00 AM -
5:00 PM work week.
The default for Time Clock 1 ON is 12:00 AM MTWTFSS, and the default for Time Clock 1 OFF is Never, so that Time Clock 1
is always Enabled.
TIME CLOCK 2 ON
TIME CLOCK 2 OFF
TIME CLOCK 3 ON
TIME CLOCK 3 OFF
Time Clocks 2 and 3 is entered into the system and set for time and dates exactly like the settings for Time Clock 1.