Horizon Fitness 4.3E - Manual (Page 8)

BEFORE
YOU
BEGIN

INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 2
FLAT WASHER (E)
BOLT (F)
FOOT LEVELER
MAIN FRAME
FOOT LEVELER AXLE
A) Open HARDWARE BAG FOR STEP 2.
B) Slide FOOT LEVELER AXLE through MAIN
FRAME TUBE. (The FOOT LEVELER AXLE
is on top of bottom styrofoam, beside
the side shroud).
C) Slide left and right FOOT LEVELERS
onto MAIN FRAME.
D) Attach FOOT LEVELERS using a
WASHER (E) and BOLT (F) on each side
of the MAIN FRAME.
BOLT (F)
20 mm
Qty: 2
FLAT WASHER (E)
16 mm
Qty: 2
HARDWARE BAG FOR STEP 2 CONTENTS :
ASSEMBLY STEP 3
SCREW (G)
12 mm
Qty: 8
A) Open HARDWARE BAG FOR STEP 3.
B) (For Model 4.3E only) Fit RUBBER PAD
into bottom of FOOT PAD with traction
nubs facing up.
C) Attach FOOTPAD to LOWER LINK ARM
PLATE using 4 SCREWS (G).
D) Repeat on other side.
FOOT PAD
LOWER LINK ARM PLATE
SCREW (G)
RUBBER PAD
(4.3E only)
HARDWARE BAG FOR STEP 3 CONTENTS :