Hitachi VT-FX631A-VT - Manual (Page 57)

57
Using the VCR Plus+ system to record a program (by using the VCR's display)
You can use the VCR Plus+ system to program the timer, observing the VCR's display, without turning on the
power to the VCR and TV.
Notes:
• If you use the VCR Plus+ system to program the timer while observing the VCR's display, you can only
program a one-time recording.
• To stop programming, press the POWER button to turn the VCR power on.
Remote Control Illustration
1 Insert a blank or eraseable tape.
The power comes on automatically and the tape indicator lights on the
display.
• When a cassette without its safety tab is inserted, playback starts
automatically and VCR Plus+
recording won't operate.
2 Press the POWER button to turn the off the VCR.
3 The clock display switches to the indication shown on the right.
• If eight programs have already been stored in memory, "FULL" will flash in
the VCR's display for
about five seconds.