Heath Zenith 598-1283-00 - Manual (Page 5)

5 598-1283-00
OF
F 3 6
D
US
K
TO
D
AW
N
TESTING
❒ Turn on the circuit breaker and light
switch.
Avoid aiming the control at:
• Objects that change temperature rapidly,
such as heating vents and air condition-
ers. These heat sources could cause false
triggering.
• Areas where pets or traffic may trigger
the control.
• Nearby large, light-colored objects re-
flecting light may trigger the shut-off feature.
Do not point other lights at the sensor.
NOTE: Sensor has a 1 1 /
2
minute warm up
period before it will detect motion.
When first turned on or when
switching modes wait 1
1 /
2
minutes.
TEST 1 5 10 MIN
ON-TIME
OFF 3 6 DUSK TO
HOUR DAWN
❒ Caulk fixture mounting surface with
silicone weather sealant. You may want
to wait until you have completed the tests
and adjustments on pages  and 5.
❒ Install one 100 Watt max. light bulb.
Slide the fixture onto the mounting
screws and tighten nuts.
Controls facing
downward
COMPLETE THE
INSTALLATION
❒ Stuff the wires into the junction box.
Make sure the wires from the fixture go
through the wire path, and no wires get
pinched.
❒ Switch the on-time to TEST position and
D
ual
B
rite
® switch to the off position.