Hitachi L42N03A - Manual (Page 11)

11
Basic Operation
Power On/Off
When you switched on power supply of the TV, the
power indicator lights up in red (standby mode).
To turn on the TV
1 Press , / or any Program Select
buttons.
The power indicator lights in blue and the
TV turns on. 
To turn off the TV
1 Press .
The power indicator lights in red and the TV
turns off to standby mode. 
It takes approximately 10 seconds for the picture to
appear after the TV is turned on.
The TV will switch to standby mode automatically if
there is no signal input for 10 minutes (for TV and
HDMI mode only).
If the TV will not be used for a long periods of time,
unplug the TV from the wall outlet. •
•
•
Channel Selection
To select a channel
1 Press / or Program Select buttons to
select the channel number directly.
Input Source Selection
To select input source
1 Press .
2 Press to select the desired input source
(TV, AV1, AV, AV3, AV4, RGB, HDMI1,
HDMI, HDMI3).
The selected input source image displays. 
AV1~4, HDMI1~3 and RGB can be selected directly
using the Direct Input Select buttons. •
Volume Adjustment
To change the volume
1 Press to increase the sound volume.
2 Press to decrease the sound volume.
To mute the sound
1 Press to temporarily turn off the sound.
2 Press or to restore the sound to
previous level.
You can decrease the sound volume by pressing
while the sound is muted.
•
On-Screen Display (OSD)
Selection and Adjustment
1
Press to display the main menu.
2 Press to select a menu.
The selected menu page displays. 
3 Press to set your selection.
4 Press to choose an item on the menu
page and press to set your selection.
5 Press to adjust an item value or choose
options.
6
Press to return to the menu, press
again to exit.
The OSD menu screen will be closed automatically
when no operation has been made for the set OSD
menu display time. •