Operation, Before starting engine – Husqvarna 67521 HV User Manual

Page 9

Advertising
background image

9

BEFORE STARTING ENGINE

ADD OIL (See Fig. 12)

Your lawnmower is shipped without oil in the engine. For type
and grade of oil to use, see “EN GINE” in the Maintenance
section of this manual.

CAUTION: DO NOT overfi ll engine

with oil, or it will smoke heavily from
the muffl er on startup.

1. Be sure lawnmower is level.

2. Remove oil dipstick from oil fi ll spout.

3. You receive a container of oil with the unit. Slowly

pour the entire container down the oil fi ll spout into the
engine.

NOTE: Initial oil fi ll requires only 18 oz. due to residual oil
in engine from the manufacturers 100% quality testing.
When changing oil you may need 20 oz.

4. Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil if needed. Fill

to full line on dipstick.

• Change the oil after every 25 hours of operation or each

season. You may need to change the oil more often
under dusty, dirty conditions. See “TO CHANGE EN-
GINE OIL” in the Maintenance section of this manual.

OPERATION

TO EMPTY GRASS CATCHER (See Figs. 10 –11)

1. Open round door of discharge chute to move starter

rope out and away from grass catcher.

FIG. 10

ROUND
DOOR

STARTER
ROPE

OPEN

FRONT
HANDLE

2. Remove grass catcher with clippings from lawn mower

using both front and rear handles.

3. Empty clippings from bag using rear handle and strap.

The weight of the grass will open the door.

4. Snap door shut over frame before installing grass

catcher on mower.

NOTE: Do not drag the bag when emptying; it will cause
unnecessary wear.

FIG. 11

FRONT

HANDLE

REAR

HANDLE

STRAP

DOOR

GASOLINE
FILLER CAP

ENGINE

OIL CAP

PRIMER

FIG. 12

Advertising