Husqvarna 124C - Manual (Page 2)

English---2 115374427 Rev. 2 5/6/10
CONTENTS
Contents
CONTENTS
Contents
2 . . . . . . . . . . . . . . . . . . . . . . . .
Note the following before starting 2 . . . .
KEY TO SYMBOLS
Symbols
3 . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY INSTRUCTIONS
Personal protective equipment
4 . . . . . .
Machine’s safety equipment 4 . . . . . . . .
Cutting equipment 5 . . . . . . . . . . . . . . . . .
Checking, maintaining and servicing
the machine’s safety equipment
5 . . . . .
General safety precautions 7 . . . . . . . . .
Starting 8 . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel safety 8 . . . . . . . . . . . . . . . . . . . . . . .
Transporting and storage 8 . . . . . . . . . . .
General working instructions 8 . . . . . . . .
Basic safety rules 8 . . . . . . . . . . . . . . . . .
Basic working techniques 9 . . . . . . . . . .
KNOW YOUR TRIMMER
Know your trimmer
11 . . . . . . . . . . . . . . . .
ASSEMBLY
Fitting the loop handle
12 . . . . . . . . . . . . .
Fitting the trimmer guard and
trimmer head
12 . . . . . . . . . . . . . . . . . . . . .
FUEL HANDLING
Fuel
13 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fueling 13 . . . . . . . . . . . . . . . . . . . . . . . . . .
STARTING AND STOPPING
Check before starting
14 . . . . . . . . . . . . . .
Starting and stopping 14 . . . . . . . . . . . . . .
MAINTENANCE
Carburetor
15 . . . . . . . . . . . . . . . . . . . . . . .
Muffler 16 . . . . . . . . . . . . . . . . . . . . . . . . . .
Spark plug 16 . . . . . . . . . . . . . . . . . . . . . . .
Air filter 17 . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance schedule 17 . . . . . . . . . . . . .
Trimmer head line loading instructions 18 . .
TECHNICAL DATA
Technical data
19 . . . . . . . . . . . . . . . . . . . .
EMISSION CONTROL
WARRANTY STATEMENT
20 . . . . . . . . .
Note the following before
starting:
Husqvarna AB has a policy of continuous
product development and therefore
reserves the right to modify the design and
appearance of products without prior
notice. Long--term exposure to noise can
result in permanent hearing impairment.
Always use approved hearing protection.
Maintenance, replacement, or repair of the
emission control devices and system may
be performed by any nonroad engine re-
pair establishment or individual.
Category C = 50 hours, B= 125 hours, and
A = 300 hours.
For reference, please fill out the following
information that will be needed for future
servicing of your trimmer:
Model Number:
Serial Number:
Purchase Date:
Purchased From:
WARNING: A clearing saw,
brushcutter or trimmer can be
dangerous if used incorrectly or
carelessly, and can cause serious
or fatal injury to the operator or
others. It is extremely important
that you read and understand the
contents of this operator’s manual.
WARNING: Under no circum-
stances may the design of the
machine be modified without the
permission of the manufacturer.
Always use genuine accessories.
Non--authorized modifications
and/or accessories can result
in serious personal injury or the
death of the operator or others.
Your warranty may not cover
damage or liability caused by the
use of non--authorized accesso-
ries or replacement parts.
The Emissions Compliance Period referred
to on the Emissions Compliance label indi-
cates the number of operating hours for
which the engine has been shown to meet
Federal emissions requirements.
For customer assistance, call:
1-800-487-5951
Contact us at our website:
www.husqvarna.com