Safety instructions after completing work, Basic working techniques, Working techniques – Husqvarna 26HS75 User Manual
Page 15
English
– 15
WORKING TECHNIQUES
Safety instructions after completing work
•
The transport guard should always be fitted to the cutting
attachment when the machine is not in use.
•
Make sure the cutting attachment has stopped before
cleaning, carrying out repairs or an inspection.
Disconnect the HT lead from the spark plug.
•
Always wear heavy-duty gloves when repairing the cutting
attachment. This is extremely sharp and can easily cause
cuts.
•
Store the machine out of reach of children.
•
Use only original spare parts for repairs.
Basic working techniques
•
When cutting the sides of a hedge, work from the bottom
upwards. When cutting horizontally, work from right to left.
•
Adjust the throttle setting to suit the load.
•
When trimming a hedge the engine should always face
away from the hedge.
•
Hold the machine as close to your body as possible to get
the best balance.
•
Make sure that the tip does not touch the ground.
•
Do not rush the work, but work steadily until all the
branches have been cut back cleanly.