Hitachi Koki USA DDC 52N - Manual (Page 44)

3-6
2. Placing the Original
Chapter 3
Mak
in
g
C
o
pies
Not Using the Document Handler
Different methods are used to place the original depending on its type. Use the procedure appropriate for
your original. If you are using a Document Handler. ☞p. 3-4
• If you place your original directly on the Original Glass, make sure that it is placed in the direction
illustrated below.
• If you need to place your original in a direction different from these examples, set the direction of the
original on the Touch Panel. ☞p. 3-37
<Using plain paper or originals not suitable for the
Document Handler>
Raise the Document Handler.
Place the original face down on the Original
Glass.
Position the original in the left rear corner
with the
↑
marker on the scale.
Gently lower the Document Handler.
<Using transparencies and translucent paper for
the original>
Place the original in the same way as the
sheet originals.
Place a blank sheet of paper of the same size
over the original.
Gently lower the Document Handler.
1155O776AA
1155O777AA
Sheet Originals
1
2
1155O773AA
3
1155O774AB
Original Scale
4
Highly Transparent Originals
1
2
1155O775AA
Blank Sheet
of Paper
3