HONDA HARMONY HRB217TDA - Manual (Page 17)

BEFORE OPERATION
15
Cutting Height
Bagging/Side-Discharge
Move all four adjustment levers to the
same position.
Mulching
Move the front adjustment levers one
position higher than the rear levers.
To adjust cutting height, pull each
adjustment lever toward the wheel,
and move it into another notch.
If you are not sure what cutting height
to select, start with a high setting and
check the appearance of the lawn
after mowing a small area. Then
readjust cutting height if necessary.
ADJUSTMENT LEVERS
ADJUSTMENT LEVER