Gs options, Quickspecs, Hp alphaserver gs1280 systems gs options – HP GS1280 User Manual
Page 12
1.
2.
3.
4.
Step 4 - Select Memory Options - Mandatory
Configuration Guidelines
Mandatory selection of one memory option per CPU (two memory options per Dual CPU Building Block Module).
Optional selection of a second memory option for each CPU.
Both options must be the same size and speed for a CPU, but different size options can be used on different CPUs.
Each memory option consists of four RDRAM Inline Memory Modules (RIMMs). An optional fifth RIMM (RAID option)
may be selected for redundancy that will allow uninterrupted operation in case of the loss of an entire RIMM. RAID
options must be selected and matched for each memory option on one CPU, but RAID options do not have to be
selected for all CPUs.
NOTE: Memory must be ordered for iCAP CPU Modules as well as Full Use CPU Modules. The system will use memory
installed on the iCAP CPU Module even when the iCAP CPU is inactive.
Memory Application Examples
The following examples illustrate different ways of configuring one 8P System Building Block Drawer with eight CPUs and a
total of 16 GB of memory.
CPU Building Block Module #1
CPU Building Block Module #2
Case
Memory
Option
CPU 1
CPU 2
CPU 3
CPU 4
Controller 1 Controller 2 Controller 1 Controller 2 Controller 1 Controller 2 Controller 1 Controller 2
A
3X-MS7AB-
BA
(4 x 256
MB)
1
1
1
1
1
1
1
1
B
3X-MS7AB-
CA
(4 x 512
MB)
1
-
1
-
1
-
1
-
CPU Building Block Module #3
CPU Building Block Module #4
CPU 5
CPU 6
CPU 7
CPU 8
Controller 1 Controller 2 Controller 1 Controller 2 Controller 1 Controller 2 Controller 1 Controller 2
A
3X-MS7AB-
BA
(4 x 256
MB)
1
1
1
1
1
1
1
1
B
3X-MS7AB-
CA
(4 x 512
MB)
1
-
1
-
1
-
1
-
QuickSpecs
HP AlphaServer GS1280 Systems
GS Options
DA - 11921 Worldwide — Version 24 — July 23, 2007
Page 12