HP TC4400 - Manual (Page 186)

B–6 Maintenance and Service Guide
Software Backup and Recovery
✎
If you do not have a CD or DVD burner, a copy of the entire
hard drive image can be stored on another hard drive or on a
network drive.
■ Perform a recovery. You can perform a full system recovery
or recover important files from the recovery partition on the
hard drive, from another drive, or from recovery discs that
you create.
Creating Recovery Discs
(Highly Recommended)
After setting up the computer for the first time, you can create a
set of recovery discs of the full factory image, using Recovery
Media Creator in the HP Backup and Recovery Manager. The
recovery discs are used to start up (boot) the computer and
recover the operating system and software to factory settings in
case of system failure or instability.
Ä CAUTION: After you create the recovery discs, you can increase the
amount of available space on the hard drive by deleting the recovery
partition. However, doing this is not recommended. If you delete this
partition, you will lose any information that is on the partition.
✎
Only one set of recovery discs can be created for this computer.
Before creating recovery discs:
■ Obtain high-quality CD-R, DVD-R, or DVD+R media,
purchased separately.
✎
Formatted DVD±RW discs and DVD±RW double-layer discs
are not compatible with HP Backup and Recovery Manager.