HP 8700 User Manual
Page 12
●
SmartFocus: Turn on to focus images for clearer, sharper detail.
–
On
–
Off
(default)
●
Digital Flash: Turn on to improve photos with poor lighting and contrast.
–
On
–
Off
(default)
●
Change the print quality
–
Normal
–
Best
(default)
Normal
uses less ink than
Best
, and applies only to the current print job. The
setting then automatically resets to
Best
.
●
Print a sample page: Select to print a sample page useful for checking the print
quality of the printer.
●
Print a test page: Select to print a test page containing information about the
printer that can help in troubleshooting problems.
●
Network settings
–
Display network IP address
: Select to display the IP address of the printer.
–
Print network settings page
: Select to print a network configuration page
that you can use for troubleshooting network connections or for the initial
network setup.
–
Reset network settings
: Select to reset the network settings to the factory
defaults.
–
Reset Bluetooth settings
: Select to reset the Bluetooth settings to the
factory defaults.
●
Clean the print cartridges: Select to clean the print cartridges. After the cleaning
finishes, the printer prints a test page. You have the option to clean the cartridges
again if the test page shows that they are still not clean.
●
Calibrate the printer: Select to calibrate the printer.
●
Select paper settings
–
Auto-detect
(default): Lets the printer auto-detect paper type and width.
–
Manually set
: Lets the user manually select paper type and width.
●
Select language: Select to indicate the language you want used on the printer
display.
●
Reset all menu settings: Restores factory settings for all menu items except
Select language
.
Chapter 1
8
HP Photosmart 8700 series