Husqvarna 323RJ EN - Manual (Page 23)

English – 23
TECHNICAL DATA
Technical data
NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting
equipment fitted. The table indicates the highest and lowest values.
Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various
working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.
323RJ 325RJ-X
Engine
Cylinder volume, cu.in/cm
3
1,50/24,5 1,50/24,5
Cylinder bore, inch/mm 1,34/34,0 1,34/34,0
Stroke, inch/mm 1,06/27 1,06/27
Idle speed, rpm 2700 2700
Recommended max. speed, rpm 11000-11700 11000-11700
Speed of output shaft, rpm 8014 8014
Max. engine output, acc. to ISO 8893 0,9/9000 0,9/9000
Catalytic converter muffler Yes (USA)/ No (Canada) Yes
Speed-regulated ignition system Yes Yes
Ignition system
Manufacturer/type of ignition system WalbroMB/SEM AM49 WalbroMB/SEM AM49
Spark plug Champion RCJ 7Y Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburettor Zama C1Q Zama C1Q
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 9,3/4,2 9,5/4,3
Sound levels
(see note 1)
Equivalent sound pressure level at the user ′s ear, measured
according to ANSI B175.3-1997, dB(A), min/max: 90/97 92/98
Vibration levels
Vibration levels at handles, measured according to ANSI
B175.3-1997, m/s
2
At idle, left/right handles, min.: 1,8/1,4 1,5/1,4
At idle, left/right handles, max.: 3,9/3,7 2,0/1,8
At max. speed, left/right handles, min.: 2,7/5,2 2,5/4,8
At max. speed, left/right handles, max.: 7,2/9,8 4,9/8,0
Approved accessories Type Cutting attachment guard, Art. no.
Arbor shaft thread M10
Plastic blades Tricut Ø 300 mm 503 93 42-02
Grass blade/grass cutter Grass 255-4 1" (Ø 255 4-teeth) 503 93 42-02
Grass 255-8 1" (Ø 250 8-teeth) 503 93 42-02
Trimmer head Trimmy H II 1" 503 97 71-01 / 503 93 42-02
Trimmy Fix 503 97 71-01 / 503 93 42-02
Trimmy Hit 1" 503 97 71-01 / 503 93 42-02
Trimmy Hit Pro 503 97 71-01 / 503 93 42-02
Superauto II 1" 503 97 71-01 / 503 93 42-02
S35 503 97 71-01 / 503 93 42-02
T35 503 97 71-01 / 503 93 42-02