Maintenance schedule, Blades conforming to en13236, Maintenance – Husqvarna K 3600 MKII User Manual
Page 18
18 –
English
MAINTENANCE
Maintenance schedule
CAUTION! The chart is based on daily use of the equipment.
Blades conforming to EN13236
Husqvarna K3600 MKII only conforms to 98/37/EC and EN13236 together with the blades listed below:
Note: The blades are available in different hardnesses for different materials, this is stated with two digits, XX.
Daily
Twice a week
Support and guide rollers
Check the support rollers with regard to wear.
X
Check the guide rollers with regard to wear.
X
Lubricate the guide rollers.
X
Hydraulic System
Inspect the hydraulic hoses.
X
Inspect and clean the water nozzle.
X
Drive system
Check the condition of the drive wheel.
X
Water system
Inspect and clean the water nozzles on the water disc.
X
Inspect the water adjustment control.
X
Check the filter in the water coupling.
X
Controls
Check that the controls work.
X
Blade
Check the condition of the blade guard.
X
Check the water disc.
X
Type
Diameter, mm
Husqvarna
PXR XX
350
ELR XX (5,6 / ,220)
350
SLR XX
350
R550-0355 (5,6 mm)
350
R530-0355
350
R510-0355 (5,6 mm)
350