HTC Z5426 - Manual (Page 33)

English -33
OPERATION
Manual Transport
When pushing or pulling the mower, be sure to engage
the IZT (Integrated Zero Turn Transaxle) bypass
linkages. The IZT bypass linkages are located on the
rear of the frame.
• Raise the deck into the highest cutting
position.
• Pull the IZT bypass linkages out and into
the slots and release so that it is held in the
bypass position.
• To reengage the IZT’s to drive, reverse the
above procedure.
WARNING!
No adjustments or maintenance
to be carried out unless:
the engine stopped •
the ignition key removed •
the parking brake activated • 8011-722
1. IZT Bypass Linkages
Bypass position with linkage head outside rear deck
1