Hitachi VTFX-6400A - Manual (Page 30)

TITLE RECORDING - 30 -
NOTE: A title contains two lines of up to 16 characters per line. A chart showing the characters contained in the
titler is located on page 29.
5. After you have selected the first character, press "SHIFT" to move the flashing cursor to the place you want
the next character.
L
6. Repeat steps 4 and 5 until you have completed the title.
LUCKY BOY
NOTE: Character may flash, however it will be recorded correctly without flashing.
7. After creating the title, press "TITLE" to remove the title graphics from the viewfinder. Now title graphics is
stored in memory.
NOTE: As long as the correct current time can be displayed, the title is held in memory.
Correcting errors during title storage
1. Press "SHIFT" repeatedly until the character to be corrected will flash.
2. Press either "-" or "+" until the correct character appears.
NOTE: The corrected character may flash, however it will be recorded correctly without flashing.
Recording titles on a tape in the camcorder
1. Slide "CAM/OFF/VIDEO" to "VIDEO".