Horizon Fitness HORIZON T82 - Manual (Page 12)

12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
ASSEMBLY STEP 
CONSOLE MAST
CONSOLE
SET SCREWS (J)
HANDLEBAR
BOLT (K)
ARC WASHER (L)
SET SCREW (J)
12 mm
Qty: 4
BOLT (K)
120 mm
Qty: 2
ARC WASHER (L)
17 mm
Qty: 2
angle view
HARDWARE BAG  CONTENTS :
A Open HARDWARE BAG .
B Slide LEFT HANDLEBAR to CONSOLE and attach using 2 SET SCREWS (J).
C Attach LEFT HANDLEBAR to CONSOLE MAST using 1 BOLT (K) and 1 ARC WASHER (L).
D Repeat on other side.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
YOU’RE FINISHED!
POWER SWITCH CIRCUIT BREAKER
Connect power plug to the treadmill
and connect the cord to a power
outlet. The on/off switch is located
next to the power cord. Flip this
switch to the 'ON' position, so that
the switch is lit. You will hear a beep
and the console will turn on.
CONSOLE MAST
CONSOLE
SET SCREWS (J)
HANDLEBAR
BOLT (K)
ARC WASHER (L)