Remove the print cartridge – HP Photosmart 140 series User Manual
Page 20
hp photosmart 140 series
chapter 1
16
7
Close the print cartridge door.
After you install a new print cartridge, the message L
OAD
PLAIN
PAPER
THEN
PRESS
OK
appears on the printer’s LCD screen. When you press the OK
button, the printer automatically calibrates the new print cartridge and
prints a calibration page to confirm that the print cartridge is correctly
installed and functioning properly. For more information, see calibrate the
remove the print cartridge
To remove the print cartridge:
1
Open the print cartridge door.
2
Push down and pull outward on the top of the print cartridge to unsnap it
from the print cartridge cradle.
3
Remove the print cartridge from the printer.
If there is ink in the print cartridge, place the cartridge in a print cartridge
protector for storage. If the print cartridge is empty, discard or recycle the
print cartridge. For information about recycling print cartridges, go to
www.hp.com/recycle.