HP Photosmart 140 series - Manual (Page 10)

hp photosmart 140 series
chapter 1
6
back of the printer
Note: Place the printer on a flat, stable
surface with the back of the printer at least
10 inches (250 mm) away from any
obstruction to allow space for the paper to
move during printing. Make sure the power
cord and USB cable do not block the rear
paper path.
indicator lights
Rear paper slot
During printing, the printer
pushes the paper partially
through this slot and then
pulls it back through to the
front of the printer
USB port
Use this port to connect
the printer to your
computer or to an HP
direct-printing digital
camera
Power cord connection
Use this port to connect the
power cord included with
the printer
On/Attention light
On (Green)
The power is on
Off
The printer is in power
save mode
Blinking (Green)
The printer is busy
Blinking (Red)
The printer requires
attention
Memory card light
On
The memory card is
inserted correctly
Off
No memory card is
inserted
Blinking
Information is being
transmitted between the
memory card and the
printer or computer