HONDA 2010 Element - Manual (Page 269)

4. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
5. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
6. Test the lights to make sure the
new bulb is working.
Replacing a Front Parking/Turn
Signal Light Bulb
1. Open the hood.
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3. Remove the bulb from the socket
by pushing the bulb in and turning
it counterclockwise until it
unlocks.
4. Install the new bulb in the socket
by pushing the bulb in and turning
it clockwise until it locks.
5. Test the lights to make sure the
new bulb is working.
CONTINUED
Lights
263
Maintenance