Hunter Fan 43052-01 - Manual (Page 7)

7 ©2008 Hunter Fan Company 43052-01 20080902
othEr huntEr ProduCts
To learn more about Hunter Fan
Company products, please see our web
page at:
www.hunterfan.com
3. Grasp the humidifier Wick, hold it over
the base, and squeeze the water from
it. This will keep water from dripping
onto your floor. You may also want
to wrap the Wick in a towel to keep it
from dripping while you transport it to
disposal.
4. Replace the old Wick with a new
Hunter humidifier Wick, number 31911.
New Wicks are available at your local
Hunter retailer or at www.hunterfan.
com.
5. Ensure the Wick is properly seated,
resting on the bottom of the base and
not tilted or otherwise out of position.
6. Return the Main Housing to its position
on the Base. Make certain the Main
Housing is properly seated on the
Base.
7. Plug the humidifier’s Power Cord into
a standard household power outlet and
turn the Power/Speed Control to your
desired setting.
sErviCE Parts
Model No. ...................................... 32200
Base .............................................. 97676
Water Tank..................................... 97678
Tank Cap ....................................... 87843
Filter ................................................31911
Hunter Original
® Fans
Programmable
Thermostats
Air Purifiers
To obtain a service part for your
humidifier, call customer service
at 1-888-830-1326 or e-mail us at
[email protected]. Please be
prepared to tell the operator the model
number of your humidifier and the name
of the part you need to replace and the
part number. Refer to Figure 1 for part
names.
Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38114
Printed in china and Taiwan
Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38114