Fisher & Paykel DW60CE - Manual (Page 21)

19
Delay start
This feature can delay the start of a wash programme by 1 to 12 hours.
To activate Delay start:
1 Load the dishes, add detergent and close the door.
2 Press to turn the dishwasher on.
3 Select the wash programme.
4 Press the delay button. The display will change to
1h
. Press the button until the display shows the
required delay (each press increases the delay by 1 hour).
5 Press to begin the Delay start.
The display will flash and count down the time remaining. The wash programme will
automatically start when the delay time is over.
To cancel Delay start, press .
Keylock
This feature disables all the buttons on the dishwasher.
To activate Keylock, press and hold for 3 seconds. The dishwasher will beep and the display
will show
LOC
to indicate that Keylock has been activated.
To cancel Keylock, press and hold for 3 seconds. The dishwasher will beep and
LOC
will
disappear from the display to indicate that Keylock has been cancelled.
If any other buttons are pressed while Keylock is activated, the dishwasher will display
LOC
and
emit a beep.
CE MODELS
heavy normal normal
eco
rinse delicate fast
Programme
selector Start/Pause Programme
indicators
Controls and starting a wash - CE models