FUJITSU SCANSNAP NETWORK SCANNER N1800 User Manual
Page 13

13
10.
Change the admin password.
On the [Admin Password] window, specify the
administrator password, and press the [Next] button.
The default value for the [Current Password] is
"password".
11.
Set the scanner's IP address.
On the [IP Address] window, set the scanner's IP
address, and press the [Next] button.
12.
Set the DNS server.
On the [DNS Server] window, set the IP address for
the DNS server, and press the [Next] button.
13.
Set the Central Admin Server.
On the [Scanner Central Admin Server] window, set
whether to enable the Central Admin Server and the
Central Admin Server settings, and press the [Finish]
button.
If DHCP is not used, do not use an IP address that
already exists in the network.
If the same IP address as the specified IP address
already exists, an error occurs.
If the scanner is not connected to the network, the
FQDN may not be displayed correctly.