Furuno GP-31 - Manual (Page 2)

Registering Waypoints
A waypoint can be entered four ways. Below is
the procedure for entry by the cursor.
1. Operate the cursor pad to place the cursor
on the location where you want to inscribe a
waypoint.
2. Press the [ENT] key.
ENTER A NEW WYPT NAME.
0 0 1 – – – ?
( 001: DEFAULT NAME )
Quit : [MENU]
CURSOR POS.
→
WYPT
3. Press the [ENT] key.
NAME: KOBE
34
°
44.000’N MARK
135
°
21.000’E x
10—APR 11:25 AMD
Exit? LOG RT?
4. Place the cursor under “MARK”.
5. Press the [ENT] key.
6. Press ▲ or ▼ to select mark shape desired.
7. Press the [ENT] key.
8. Select “Exit?” and then press the [ENT] key.
Registering Routes
1. Press the [MENU] key once or twice to dis-
play the menu.
2. Select “ROUTES”.
3. Press the [ENT] key.
4. Press the [ENT] key.
5. Press the [ENT] key, select route waypoint
and press the [ENT] key.
6. Repeat step 5 to enter other waypoints on
the route.
7. Select “Exit?” to register route and finish.
8. Press the [ENT] key to register.
Setting, Cancelling
Destination
Destination can be set three ways. Below is the
method for setting destination by the cursor.
To set destination by cursor;
1. Press the [GOTO] key.
2. Select “CURSOR?”.
3. Press the [ENT] key.
4. Place the cursor on position to set as desti-
nation.
5. Press the [ENT] key.
To cancel destination;
1. Press the [GOTO] key.
2. Select “OFF?”.
3. Press the [ENT] key.
Setting the Arrival Alarm
1. Press the [MENU] key once or twice to dis-
play the menu.
2. Select “ALARMS”.
3. Press the [ENT] key.
4. Select “ARV/ANC” and press the [ENT] key.
5. Select “ARV” and press the [ENT] key.
6. Press the [ENT] key and enter arrival alarm
range with the cursor pad.
7. Press the [ENT] key.
8. Press the [MENU] key twice to finish.
P U B . N O . O S E - 4 3 9 9 0 - A
( 9 9 0 5 , D A M I ) G P - 3 1 / 3 6