FUJITSU fi-4860C - Manual (Page 27)

4
1.2 Names and Functions of Parts
No. Name Function
1 Operator panel Used for operating the scanner.
2 Power button Used to power the scanner on/off.
3 Hopper Document input tray.
4 Side guides Used for adjusting the document width.
5 Hopper extension Used for long documents.
6 ADF (Automatic docu-
ment feeder) Feeds documents automatically.
7 Pick roller unit Picks top page from document stack.
8 Guide plate The pad assy is mounted on.
9 Pad Assy Separates top page from document stack.
10 Upper transport unit Opens for easy access.
11 Lever Used to open the Upper transport unit.
12 Stacker Document exit tray.
13 Stopper Used to stop documents as they exit into the stacker.
14 Stacker extension Used to support long documents.
15 Main line switch Controls supply of line power to the scanner.
16 Power inlet For the power cable connection.
17 Interface connector Ultra Wide SCSI (1pcs.)
18 Third party slot (TPS) For installing a option board
19 Imprinter covers Opens to access print cartridge for replacement.
20 Lamp covers Opens to access back side lamp.