FUJITSU B3000 User Manual

Page 10

Advertising

L i f e B o o k B S e r i e s N o t e b o o k B I O S

Serial/Parallel Port Configurations Submenu of the Advanced Menu

The Serial/Parallel Port Configurations submenu allows
you to set the I/O addresses and interrupt levels for the
serial, touch panel, and parallel ports of your notebook

All I/O addresses in Table 4 are in hexadecimal.

Figure 4. Serial/Parallel Port Configurations Submenu

I/O addresses, DMA channels and
Interrupt levels can be entered in various
ways, including via the BIOS setup utility,
the control software for the I/O device, or
the hardware. If any two ports or devices,
serial or parallel, have the same I/O
address assigned, your notebook will not
function normally. Please keep a record of
original settings before making any
changes in the event that a restoration is
required. See your hardware and software
documentation as well as the setup utility
to determine settings, limitations, etc.

• To prevent IRQ and address conflicts,

avoid changing the default settings. If
you must change the settings, you can
call 1-800-8FUJITSU for technical assis-
tance.

• The BIOS will warn you of a resource

conflict by placing a yellow asterisk next
to each device that is in conflict.

PhoenixBIOS Setup Utility

Help

ESC

Exit

Select Item

Select Menu

-/Space

Enter

Setup

Defaults

F10

Save and Exit

Change Values

Select Sub-Menu

▲

Advanced

Item Specific Help

Serial Port:

[

Enabled

]

I/O Address:

[3F8 - 3FF]

Interrupt:

[IRQ 4]

Touch Panel:

[Enabled]

I/O Address:

[2E8 - 2EF]

Interrupt:

[IRQ 3]

Parallel Port:

[Enabled]

Mode:

[Bi-directional]

I/O Address:

[378 - 37F]

Interrupt:

[IRQ 7]

[Disabled]

The port is disabled.

[Enabled]

The port is enabled

with user configuration.

[Auto]

Plug & Play OS

configure the port.

Serial/Parallel Port Configurations

Advertising