E-11 – FUJITSU PLASMAVISION P50XHA40U User Manual
Page 11
E-11
Engl
ish
Deut
sch
Espa
ñol
Fra
n
ç
ai
s
It
a
lia
n
o
Portugu
ê
s
日
本
語
Póññ
кий
ч–Œ
ƒ
In the Comp.video and Video/S-video, the display has been factory-set as follows for different input signals:
Main corresponding signals (Comp.video mode)
Main corresponding signals (Video, S-video mode)
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Signal HDMI
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Signal
15.73
59.94
SDTV 480i
15.73
59.94
NTSC
15.63
50.00
SDTV 576i
15.63
50.00
PAL
31.47
59.94
SDTV 480p
15.63
50.00
SECAM
31.25
50.00
SDTV 576p
15.63
59.52
PAL60
45.00
60.00
HDTV 720p
15.63
50.00
N-PAL
37.50
50.00
HDTV 720p
15.73
59.95
M-PAL
33.75
60.00
HDTV 1080i
15.73
59.94
4.43NTSC
28.13
50.00
HDTV 1080i
Note
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.
• With some input signals, "Out of range" may appear even when the horizontal and vertical frequencies are within their permissible ranges. In this
event, match the input signals to another frequency rather than those listed above.
• You can check input signals through "Information" on the FEATURES Menu screen. (See User's Manual (2/2))
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.
MHD01695_E.book 11 ページ ２００５年２月１日 火曜日 午後７時７分