Meridian Audio DILA1080pHD - Manual (Page 12)

12
1
Remote Control’s Signal Transmitter
( ☞ Page 17)
2
[OPERATE ON] Button
When this unit is in the standby mode, pressing the
button for more than 1 second will turn this unit on and
cause the [OPERATE] indicator to light up. (
☞ Page
20)
3
[LIGHT] Button
Lights up illumination (light) of the remote control
buttons for about 10 seconds.
4
[FOCUS] Button
Use this button to adjust focus of the projected image.
Press the button to switch to the image mode for focus
adjustment. Adjust focus using the focus ring on this
unit.
● Press the [EXIT] button to return to the original image.
Remote Control
5
[MENU] Button
Press this button to display the menu. Pressing this
button when the menu is displayed clears the menu.
(
☞ Pages 23, 24)
6
Cursor [උ/ /፶/፷] Buttons
Use these buttons when adjusting the menu items.
(
☞ Pages 23, 24)
7
[PRESET] Button
Use this button to reset the values to factory settings
when the “Gamma”, “Color temp.”, “Mask” or “Picture
shift” item in the menu is selected.
8
[OPERATE OFF] Button
When this unit is in operation (projecting), press it for 1
second or more to switch to the cool down mode, which
will automatically switch to the standby mode after
about 90 seconds. (
☞ Page 21)
● The [OPERATE OFF] button will not work within
approximately 1 minute after the light source has
been turned on. Start operation only after 1 minute’s
time.
9
[TEST] Button
Press this when adjusting focus, screen size or picture
quality. Press the button to switch to the test pattern
image for adjustment.
● Alter the test pattern with the [TEST] button.
● Press the [EXIT] button to return to the original image.
10
[EXIT] Button
Press this button to return to the previous hierarchical
menu (for example, to return from submenu to main
menu). Pressing this button when the menu is
displayed will clear the menu. (
☞ Pages 23, 24)
11
[ENTER] Button
Press this button to show the next hierarchical menu
(for example, to enter submenu from main menu). It is
also used when “ENTER” is displayed against a
selection item on the menu screen. (
☞ Pages 23, 24)
12
[HIDE] Button
Press this button to temporarily clear the video image.
Press again to resume. (
☞ Page 21)
Controls and Features (continued)
11
12
ON
ENTER
OFF
FOCUS TEST
MENU EXIT
PRESET HIDE
LIGHT
OPERATE
10
9
8
6
7
5
4
3
2
1